HD74ALVC2G07 Triple Buffers / Drivers with Open Drain REJ03D0163-0500 Rev.5.00 Sep 08, 2006 Description The HD74ALVC2G07 has triple buffers / drivers with open drain outputs in an 8 pin package. Low voltage and highspeed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features • • • • • • • The basic gate function is lined up as Renesas uni logic series. Supplied on emboss taping for high-speed automatic mounting. Supply voltage range : 1.2 to 3.6 V Operating temperature range: −40 to +85°C All inputs VIH (Max.) = 3.6 V (@VCC = 0 V to 3.6 V) All outputs VO (Max.) = 3.6 V (@VCC = 0 V, Output: Z) Output current 2 mA (@VCC = 1.2 V) 4 mA (@VCC = 1.4 V to 1.6 V) 6 mA (@VCC = 1.65 V to 1.95 V) 18 mA (@VCC = 2.3 V to 2.7 V) 24 mA (@VCC = 3.0 V to 3.6 V) • Ordering Information Part Name Package Type HD74ALVC2G07USE SSOP-8 pin Package Code (Previous Code) PVSP0008KA-A (TTP-8DBV) Package Abbreviation US Taping Abbreviation (Quantity) E (3,000 pcs/reel) Outline and Article Indication • HD74ALVC2G07 Index band Lot No. Y M W A 0 7 SSOP-8 Marking Rev.5.00 Sep 08, 2006 page 1 of 6 Y : Year code (the last digit of year) M : Month code W : Week code HD74ALVC2G07 Function Table Input A L H H: L: Z: Output Y L Z High level Low level High impedance Pin Arrangement 1A 1 8 VCC 3Y 2 7 1Y 2A 3 6 3A GND 4 5 2Y (Top view) Absolute Maximum Ratings Item Supply voltage range Input voltage range *1 Symbol VCC VI Output voltage range *1, 2 VO Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25°C (in still air) Storage temperature Notes: Ratings −0.5 to 4.6 −0.5 to 4.6 −0.5 to VCC+0.5 Unit V V V IIK IOK IO −0.5 to 4.6 −50 −50 ±50 mA mA mA ICC or IGND ±100 mA PT 200 mW Tstg −65 to 150 °C Conditions Output : L VCC : OFF or Output : Z VI < 0 VO < 0 VO = 0 to VCC The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. 3. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 3. This value is limited to 4.6 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C. Rev.5.00 Sep 08, 2006 page 2 of 6 HD74ALVC2G07 Recommended Operating Conditions Item Supply voltage range Input voltage range Output voltage range Symbol VCC VI VO Output current IOL Input transition rise or fall rate ∆t / ∆v Operating free-air temperature Ta Min 1.2 0 0 Max 3.6 3.6 VCC 2 4 6 18 0 0 −40 24 20 10 85 Unit V V V mA ns / V Conditions VCC = 1.2 V VCC = 1.4 V VCC = 1.65 V VCC = 2.3 V VCC = 3.0 V VCC = 1.2 to 2.7 V VCC = 3.3±0.3 V °C Note: Unused or floating inputs must be held high or low. Electrical Characteristics (Ta = −40 to 85°C) Item Symbol VIH Input voltage VIL VCC (V) 1.2 *1 Min VCC×0.75 Typ Max Unit Test Conditions 1.4 to 1.6 1.65 to 1.95 2.3 to 2.7 VCC×0.7 VCC×0.7 1.7 3.0 to 3.6 1.2 1.4 to 1.6 1.65 to 1.95 2.3 to 2.7 2.0 VCC×0.25 VCC×0.3 VCC×0.3 0.7 0.8 0.2 0.3 0.3 0.3 0.55 0.55 ±5 µA IOL = 100 µA IOL = 2 mA IOL = 4 mA IOL = 6 mA IOL = 18 mA IOL = 24 mA VIN = 3.6 V or GND V Input current IIN 3.0 to 3.6 Min to Max 1.2 1.4 1.65 2.3 3.0 3.6 Off state output current IOZ 3.6 ±5 µA VOUT = VCC or GND Quiescent supply current ICC 3.6 10 µA VIN = VCC or GND, IO = 0 Output voltage VOL V Output leakage VIN or VO = IOFF 0 5 µA current 0 to 3.6 V Input capacitance CIN 3.3 5.0 pF VIN = VCC or GND Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. Rev.5.00 Sep 08, 2006 page 3 of 6 HD74ALVC2G07 Switching Characteristics VCC = 1.2 V Item Propagation delay time Symbol Ta = −40 to 85°C Min Typ Max tLZ tZL 5.5 Unit ns Test Conditions CL = 15 pF FROM (Input) TO (Output) A Y VCC = 1.5±0.1 V Item Propagation delay time Symbol tLZ tZL Ta = −40 to 85°C Min Typ Max Unit ns 1.0 7.0 Test Conditions CL = 15 pF FROM (Input) TO (Output) A Y VCC = 1.8±0.15 V Item Propagation delay time Symbol tLZ tZL Ta = −40 to 85°C Min Typ Max 1.0 5.0 Unit ns Test Conditions CL = 30 pF FROM (Input) TO (Output) A Y VCC = 2.5±0.2 V Item Propagation delay time Symbol tLZ tZL Min Ta = −40 to 85°C Typ Max 0.5 Unit 3.5 ns Test Conditions CL = 30 pF FROM (Input) TO (Output) A Y VCC = 3.3±0.3 V Item Propagation delay time Symbol tLZ tZL Ta = −40 to 85°C Min Typ Max Unit ns 0.5 2.5 Test Conditions CL = 30 pF FROM (Input) TO (Output) A Y Operating Characteristics (Ta = 25°C) Item Power dissipation capacitance Symbol CPD Rev.5.00 Sep 08, 2006 page 4 of 6 VCC (V) 1.5 1.8 2.5 3.3 Min Typ 2.0 2.0 2.5 3.5 Max Unit pF Test Conditions f = 10 MHz HD74ALVC2G07 Test Circuit *1 VCC × 2 or 6.0 V VCC RL Pulse Generator Input Output Z out = 50 Ω CL Symbol RL VCC = 1.2 V, V = 1.8±0.15 V VCC = 2.5±0.2 V VCC = 3.3±0.3 V 1.5±0.1 V CC RL 2.0 kΩ 1.0 kΩ 500 Ω 500 Ω CL 15 pF 30 pF 30 pF 30 pF *1 VCC × 2 VCC × 2 VCC × 2 6.0 V Note: CL includes probe and jig capacitance. Waveforms tf tr 90% 90% V ref V ref Input VIH 10% 10% t ZL GND t LZ VOH V ref Output VL Symbol VCC = 1.2 V, 1.5±0.1 V VCC = 1.8±0.15 V VCC = 2.5±0.2 V VOL VCC = 3.3±0.3 V tr / t f 2.0 ns 2.0 ns 2.5 ns 2.5 ns V IH VCC VCC VCC 2.7 V V ref 50% 50% 50% 1.5 V VL VL = VOL+0.1 V VL = VOL+0.15 V VL = VOL+0.15 V VL = VOL+0.3 V Note: Input waveform : PRR = 10 MHz, duty cycle 50% Rev.5.00 Sep 08, 2006 page 5 of 6 HD74ALVC2G07 Package Dimensions JEITA Package Code P-VSSOP8-2.3x2-0.50 RENESAS Code PVSP0008KA-A Previous Code TTP-8DB/TTP-8DBV MASS[Typ.] 0.010g D F 1.5 ±0.2 8 5 bp c HE E c1 b1 Terminal cross section L1 4 bp A1 ( 0.17 ) e A2 1 Detail F Rev.5.00 Sep 08, 2006 page 6 of 6 Reference Dimension in Millimeters Symbol Min Nom Max D 1.8 2.0 2.2 E 2.2 2.3 2.4 A2 0.6 0.7 0.8 A1 0.1 0 A bp 0.15 0.22 0.3 b1 0.20 c 0.08 0.13 0.23 c1 0.11 θ HE 2.8 3.1 3.4 e (0.5) x y Z L L1 (0.4) Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2006. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .6.0