BUTTON AUTOMOTIVE RECTIFIER AR5005 THRU AR508 ARS5005 THRU ARS508 • • • CURRENT 50.0 Amperes ARS .185(4.7) .165(4.2) Low Leakage Low forward voltage drop High current capability High forward surge current capacity .185(4.7) .165(4.2) .250(6.4) .235(6.0) MECHANICAL DATA • • • 50 to 600 Volts AR FEATURES • • • • VOLTAGE RANGE Case: transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Plated slug , solderable per MIL-STD-202E method 208C Polarity: Color ring denotes cathode end Mounting Position: any Weight: 0.064 ounces, 1.82 grams .225(5.7)DIA .215(5.5)TYP .250(6.4) .235(6.0) .410(10.4)DIA .380(9.7)TYP .346(8.8)DIA .327(8.2)TYP .225(5.7)DIA .215(5.5)TYP Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS AR5005 AR501 AR502 AR504 AR506 AR508 ARS5005 ARS501 ARS502 ARS504 ARS506 ARS508 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 Volts Maximum Average Forward Rectified Current, At Tc=110℃ IO 50.0 Amps IFSM 600 Amps Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum instantaneous Forward Voltage at 80A VF Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃ Typical Thermal Resistance Operating and Storage Temperature Range 1.08 Volts 5.0 IR UA 400 RθJC 0.8 ℃/W TJ,TSTG (-65 to +175) ℃ Polarity and voltage demotion color band Red Yellow Notes: 1. 1.10 Enough heatsink must be considered in application. Web Site: www.hkmic.com Silver Green Green Blue BUTTON AUTOMOTIVE RECTIFIER AR5005 THRU AR508 ARS5005 THRU ARS508 60 50 40 Single Phase Half Wave 60Hz Resistive or Inductive Load 10 CURRENT 50.0 Amperes F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT, (A) F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE 20 50 to 600 Volts AR5005 THRU AR508 ARS3505 THRU ARS508 RATINGS AND CHARACTERISTIC CURVES 30 VOLTAGE RANGE 600 8.3ms Single Half Sine-Wave 500 (JEDEC Method) Tj=Tj max 400 300 200 100 1 Cycle 0.375″(9.5mm) Lead Length 0 1 0 0 25 50 75 110 100 125 150 175 2 4 6 8 10 20 40 60 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 10 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 0.8 1.0 1.2 1.4 1.6 40 SQUARE WAVE 20 0 0 20 30 40 50 AVERAGE FORWARD CURRENT, (A) 1.0 0.1 0.6 60 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) Web Site: www.hkmic.com 60