BUTTON AUTOMOTIVE RECTIFIER ARL750 THRU ARL756 VOLTAGE RANGE 50 to 600 Volts CURRENT 6.0 Amperes AR-L FEATURES • • • • 0.409(10.4)DIA 0.382(9.7)TYP Low Leakage Low forward voltage drop High current capability High forward surge current capacity 0.051(1.3)DIA 0.047(1.2)TYP 1.0(25.4) MIN MECHANICAL DATA • • • • • • • 0.252(6.4) 0.236(6.0) Technology: Cell with vacuum soldered Case: transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Plated lead , solderable per MIL-STD-202E method 208C Polarity: Color ring denotes cathode end Mounting Position: any Weight: 0.083 ounces, 2.32 grams 1.0(25.4) MIN Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS ARL750 ARL751 ARL752 ARL754 ARL756 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 Volts Maximum Average Forward Rectified Current, IO 6.0 Amps IFSM 250 Amps Rating for fusing (t＜8.3ms) I2t 259 A2S Maximum instantaneous Forward Voltage at 80A VF 1.0 Volts At Tc=110℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃ Typical Thermal Resistance Operating and Storage Temperature Range Polarity and voltage demotion color band 5.0 IR RθJC 1.0 ℃/W TJ,TSTG (-65 to +175) ℃ Red Notes: 1. UA 250 Enough heatsink must be considered in application. Web Site: www.hkmic.com Yellow Silver Green Green BUTTON AUTOMOTIVE RECTIFIER ARL750 THRU ARL756 VOLTAGE RANGE 50 to 600 Volts CURRENT 6.0 Amperes RATINGS AND CHARACTERISTIC CURVES ARL750 THRU ARL756 F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT, (A) F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE 6.0 5.0 4.0 3.0 Single Phase Half Wave 60Hz 2.0 Resistive or 300 8.3ms Single Half Sine-Wave 250 (JEDEC Method) Tj=Tj max 200 100 Inductive Load 1.0 1 Cycle 0.375″(9.5mm) Lead Length 0 1 0 0 25 50 75 110 100 125 150 175 2 4 6 8 10 20 40 60 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 10 30 20 SQUARE WAVE 10 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 0.8 1.0 1.2 1.4 1.6 0 5 10 15 20 AVERAGE FORWARD CURRENT, (A) 1.0 0.1 0.6 0 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) Web Site: www.hkmic.com 25