Cree XTE-HV Series on Board Cree XTE-HV Series Optimized for non-directional and small LED replacement lamps such as B10 candelabra, E17, GU10 and A19 bulbs, the XLamp XTE High-Voltage White LED delivers both high lumen output and high efficacy in a small footprint. FEATURES APPLICATIONS > Typical VF = 46V @ 22mA, Maximum IF=66mA > Lighting > Wide Viewing Angle: 115 > Small Bulbs 0 > Low Thermal Resistance: 6.5 C/W > E17, GU10, A19, B10 0 > Maximum Junction Temperature: 1500C Flux Characteristics (T j=85 0C--White) COLOR TEMPERATURE CCT (TYP.)( 0 K)* MIN.FLUX (LM) @22MA KIT USED Cool White 6000--6500 107 LD51 Neutral White 4750--5000 100 LCE3 Warm White 3000--3250 80.6 L9E7 *See Cree Specifications *Absolute Maximum Ratings (Note 1) ITEMS SYMBOL RATING UNIT Forward Current (Note 2) IF 66 Forward Voltage (@22mA, 850C) VF 55 V mA Reverse Current IR 0.1 mA Temperature Coefficient of Forward Voltage VTC -37 mV/0C Operating Temperature at TC Point (Note 2&3) TOPR 115 Junction Temperature TJ 150 ESD Classification (HBM per MIL-STD-883D) -- Class 2 0 C 0 C -- * Exceeding maximum ratings may damage the LED and cause potential safety hazards. * Elevated operating temperatures can be expected to negatively impact the service life (lumen output) * All data is related to entire assembly. Data reflects statistical mean values. Actual data may differ depending on variances in the manufacturing process. * End users need to take into account the lumen depreciation as the temperature rises with various thermal solutions installed. * It is highly recommended for the user to review the CREE XTE-HV Series page for additional and most recent technical data at http://www.cree.com/led-components-and-modules/products/xlamp/discrete-directional/xlamp-xte-hvw 2012-04-18 Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: www.marktechopto.com 518-785-4725 • EMAIL: [email protected] 1 Cree XTE-HV Series on Board Note 1: Using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions are within the absolute maximum ratings. Note 2: The thermal resistance from the LED junction to ambient temperature, Rth(j-a), should be kept below 100C/W so that the LED is not exposed to a condition beyond the absolute maximum ratings. Note 3: The temperature of the LED assembly must be measured at the TC-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. Hardware (not included) > Mount with #4 Machine Screws. > 16AWG Maximum Wire Gauge. > Use only with constant current power supplies. PCB Fabrication > Layer Count: 1 > Core Material: 6061-T6 Aluminum > Single Layer Copper Weight: 1oz > Solder Mask: White > Finishing Plating: Pb Free HASL The information contained herein is subject to change without notice. 2012-04-18 Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: www.marktechopto.com 518-785-4725 • EMAIL: [email protected] 2