8 7 6 5 160.00 mm [6.299 in] 83.77 mm [3.298 in] B B 2.00 mm [0.079 in] SECTION A-A 147.32 mm [5.800 in] 121.46 mm [4.782 in] C 3.73 mm 4X [0.147 in] 2.50 mm [0.098 in] Polycarbonate Version Only 38.71 mm [1.524 in] 44.37 mm [1.747 in] 52.00 mm [2.047 in] 6.00 mm [0.236 in] (ORDERED SEPARATELY) R8.33 mm 4X [0.328 in] SECTION B-B 58.01 mm [2.284 in] 154.00 mm [6.063 in] [0.153 in] (MOUNTING HOLES) File #E65324 NEMA 4, 4X Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] [0.110 in] NOTE Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) STEEL INNER PANEL 3.90 mm 4X 136.00 mm [5.354 in] 77.47 mm [3.050 in] 2.79 mm 4X 130.66 mm [5.144 in] 136.00 mm [5.354 in] B 1 90.00 mm [3.543 in] A ASSEMBLY 2 D 128.83 mm [5.072 in] C 3 60.50 mm [2.382 in] A D 4 Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) 150.90 mm [5.941 in] 3.00 mm 6X B 1555J [0.118 in] 1555J Regular Enclosure General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 R6.00 mm 4X [0.236 in] 57.00 mm [2.244 in] 45.00 mm [1.772 in] 121.50 mm [4.783 in] 58.00 mm [2.283 in] 79.25 mm [3.120 in] 1555JGY 1555J2GY ACCESSORIES R7.50 mm 4X [0.295 in] 42.00 mm [1.654 in] 58.00 mm [2.283 in] 79.42 mm [3.127 in] 121.50 mm [4.783 in] 24.00 mm [0.945 in] Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 1554JPL 1591MM100 1598ATS100 SC1554 3.00 mm 4X M3 BRASS INSERTS 4X A [0.118 in] 135.00 mm [5.315 in] 147.00 mm [5.787 in] 132.00 mm [5.197 in] M4 STAINLESS STEEL INSERTS A LID - INSIDE 1555J BOX - INSIDE 8 7 6 5 4 3 2 1