8 7 6 5 4 3 2 1 120.00 mm [4.724 in] 40.50 mm [1.594 in] A D B R5.00 mm [0.197 in] D B 65.00 mm [2.559 in] A SECTION A-A ASSEMBLY 110.49 mm [4.350 in] R8.33 mm 4X [0.328 in] C 26.87 mm [1.058 in] 34.50 mm 6.00 mm [1.358 in] [0.236 in] Polycarbonate Version Only 95.00 mm [3.740 in] R1.00 mm [0.039 in] C File #E65324 NEMA 4, 4X (ORDERED SEPARATELY) 52.83 mm [2.080 in] 28.00 mm 36.17 mm [1.102 in] [1.424 in] Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] NOTE SECTION B-B 3.00 mm 2X 87.00 mm [3.425 in] [0.118 in] Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) 1554C [0.153 in] (MOUNTING HOLES) B 1554C Regular Enclosure 24.00 mm [0.945 in] General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 82.00 mm [3.228 in] 1554CGY 1554C2GY 1554C Clear / Smoke Lid Enclosure Polycarbonate Box / Clear Polycarbonate Lid Polycarbonate Box / Smoke Polycarbonate Lid 1554C2GYCL 1554C2GYSL ACCESSORIES R7.50 mm 4X [0.295 in] 28.00 mm 52.00 mm 54.44 mm [1.102 in] [2.047 in] [2.143 in] 40.00 mm [1.575 in] [0.147 in] 3.90 mm 2X R6.00 mm 4X [0.236 in] 59.00 mm [2.323 in] Purchased assembly includes box, lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) STEEL INNER PANEL 95.00 mm [3.740 in] B 3.73 mm 6X 82.30 mm [3.240 in] 37.00 mm [1.457 in] 54.70 mm [2.154 in] Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 1554CPL 1591MM100 1598ATS100 SC1554 M4 STAINLESS STEEL INSERTS M3 BRASS INSERTS 4X A 85.00 mm [3.346 in] 111.00 mm [4.370 in] 114.00 mm [4.488 in] 7 1554C LID - INSIDE BOX - INSIDE 8 A 6 5 4 3 2 1