HT73XX Low Power Consumption LDO Features · Ultra low quiescent current: 3.5mA (typ.) · Maximum output current: 250mA · High input voltage (up to 12V) · Low dropout voltage · Output voltage: · Low temperature coefficient · TO-92, SOT-89 package 1.8V, 2.5V, 2.7V, 3.0V, 3.3V, 3.5V, 5.0V · Output voltage accuracy: tolerance ±3% Applications · Battery-powered equipment · Wireless Communication equipment · Voltage regulator for microprocessor · Audio/Video equipment · Voltage regulator for LAN cards General Description The HT73XX series is a set of three-terminal, low power, high voltage regulators implemented in CMOS technology. The series features extremely low quiescent current which is typically 3.5mA . They allow input voltages as high as 12V. The device provides large current with a significantly small dropout voltage. The HT73XX consists of a high-precision voltage reference, an error correction circuit, and a current limited output driver. They are available with several fixed output voltages ranging from 1.8V to 5.0V. CMOS technology ensures low dropout voltage and low current consumption. Although designed primarily as fixed voltage regulators, these devices can be used with external components to generate variable voltages and currents. Selection Table Note: Part No. Output Voltage HT7318 1.8V HT7325 2.5V HT7327 2.7V HT7330 3.0V HT7333 3.3V HT7335 3.5V HT7350 5.0V Package TO-92 SOT-89 Marking 73XX-A (for TO-92) 73XX-A (for SOT-89) ²XX² stands for output voltages. For lead free devices, TO-92 package will add a ²#² mark at the end of the date code, whereas SOT-89 package will add a ²#² mark at the end of the marking. Rev. 1.40 1 January 12, 2006 HT73XX Block Diagram V IN V O U T V re f G N D Pin Assignment T O -9 2 S O T -8 9 7 3 X X -A F r o n t V ie w 7 3 X X -A G N D V IN V O U T B o tto m G N D V IN G N D V IN V O U T V ie w V O U T Absolute Maximum Ratings Supply Voltage ...........................VSS-0.3V to VSS+14V Storage Temperature ...........................-50°C to 125°C Power Consumption (*1) .................................. 500mW Operating Temperature ..........................-40°C to 85°C Power Consumption (*2) ...................................500mW Note: These are stress ratings only. Stresses exceeding the range specified under ²Absolute Maximum Ratings² may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. *1: applied to TO-92 *2: applied to SOT-89 Rev. 1.40 2 January 12, 2006 HT73XX Electrical Characteristics HT7318, +1.8V Output Type Symbol Parameter Ta=25°C Test Conditions VIN Conditions Min. Typ. Max. Unit VOUT Output Voltage 2.8V IOUT=40mA 1.746 1.8 1.854 V IOUT(MAX) Maximum Output Current 2.8V VOUT³1.62V 150 ¾ ¾ mA DVOUT* Load Regulation 2.8V 1mA£IOUT£60mA ¾ 45 90 mV VDROP** Dropout Voltage ¾ IOUT=40mA ¾ 170 ¾ mV ISS Quiescent Current No load ¾ 3.5 7 mA IOUT=40mA 2.8V£VIN£12V ¾ 0.2 0.3 %/V ¾ ¾ 12 V ¾ ±0.7 ¾ mV/°C D V D V O U T ´ V IN O U T VIN D V O D T U T Line Regulation ¾ Input Voltage ¾ Temperature Coefficient a 2.8V 2.8V ¾ IOUT=40mA -40°C<Ta<85°C HT7325, +2.5V Output Type Symbol Parameter Ta=25°C Test Conditions VIN Conditions Min. Typ. Max. Unit VOUT Output Voltage 3.5V IOUT=40mA 2.425 2.5 2.575 V IOUT(MAX) Maximum Output Current 3.5V VOUT³2.25V 180 ¾ ¾ mA DVOUT* Load Regulation 3.5V 1mA£IOUT£60mA ¾ 45 90 mV VDROP** Dropout Voltage ¾ IOUT=40mA ¾ 110 ¾ mV ISS Quiescent Current No load ¾ 3.5 7 mA IOUT=40mA 3.5V£VIN£12V ¾ 0.2 0.3 %/V ¾ ¾ 12 V ¾ ±0.7 ¾ mV/°C D V D V O U T ´ V IN O U T VIN D V O D T U T Line Regulation ¾ Input Voltage ¾ Temperature Coefficient a 3.5V 3.5V ¾ IOUT=40mA -40°C<Ta<85°C HT7327, +2.7V Output Type Symbol Parameter Ta=25°C Test Conditions VIN Conditions Min. Typ. Max. Unit VOUT Output Voltage 3.7V IOUT=40mA 2.619 2.7 2.781 V IOUT(MAX) Maximum Output Current 3.7V VOUT³2.43V 200 ¾ ¾ mA DVOUT* Load Regulation 3.7V 1mA£IOUT£80mA ¾ 45 90 mV VDROP** Dropout Voltage ¾ IOUT=40mA ¾ 100 ¾ mV ISS Quiescent Current No load ¾ 3.5 7 mA IOUT=40mA 3.7V£VIN£12V ¾ 0.2 0.3 %/V ¾ ¾ 12 V ¾ ±0.7 ¾ mV/°C D V D V O U T ´ V IN VIN D V O D T U T a Rev. 1.40 O U T 3.7V Line Regulation ¾ Input Voltage ¾ Temperature Coefficient 3.7V ¾ IOUT=40mA -40°C<Ta<85°C 3 January 12, 2006 HT73XX HT7330, +3.0V Output Type Symbol Parameter Ta=25°C Test Conditions VIN Conditions Min. Typ. Max. Unit VOUT Output Voltage 4V IOUT=40mA 2.91 3 3.09 V IOUT(MAX) Maximum Output Current 4V VOUT³2.7V 250 ¾ ¾ mA DVOUT* Load Regulation 4V 1mA£IOUT£80mA ¾ 45 90 mV VDROP** Dropout Voltage ¾ IOUT=40mA ¾ 95 ¾ mV ISS Quiescent Current 4V No load ¾ 3.5 7 mA Line Regulation ¾ IOUT=40mA 4V£VIN£12V ¾ 0.2 0.3 %/V Input Voltage ¾ ¾ ¾ ¾ 12 V Temperature Coefficient 4V ¾ ±0.7 ¾ mV/°C D V D V O U T ´ V IN O U T VIN D V O D T U T a IOUT=40mA -40°C<Ta<85°C HT7333, +3.3V Output Type Symbol Parameter Ta=25°C Test Conditions VIN Conditions Min. Typ. Max. Unit VOUT Output Voltage 4.3V IOUT=40mA 3.201 3.3 3.399 V IOUT(MAX) Maximum Output Current 4.3V VOUT³2.97V 250 ¾ ¾ mA DVOUT* Load Regulation 4.3V 1mA£IOUT£80mA ¾ 45 90 mV VDROP** Dropout Voltage ¾ IOUT=40mA ¾ 90 ¾ mV ISS Quiescent Current No load ¾ 3.5 7 mA IOUT=40mA 4.3V£VIN£12V ¾ 0.2 0.3 %/V ¾ ¾ 12 V ¾ ±0.7 ¾ mV/°C D V D V O U T ´ V IN O U T VIN D V O D T U T Line Regulation ¾ Input Voltage ¾ Temperature Coefficient a 4.3V 4.3V ¾ IOUT=40mA -40°C<Ta<85°C HT7335, +3.5V Output Type Symbol Parameter Ta=25°C Test Conditions VIN Conditions Min. Typ. Max. Unit VOUT Output Voltage 4.5V IOUT=40mA 3.395 3.5 3.605 V IOUT(MAX) Maximum Output Current 4.5V VOUT³3.15V 250 ¾ ¾ mA DVOUT* Load Regulation 4.5V 1mA£IOUT£80mA ¾ 45 90 mV VDROP** Dropout Voltage ¾ IOUT=40mA ¾ 80 ¾ mV ISS Quiescent Current No load ¾ 3.5 7 mA IOUT=40mA 4.5V£VIN£12V ¾ 0.2 0.3 %/V ¾ ¾ 12 V ¾ ±0.7 ¾ mV/°C D V D V O U T ´ V IN VIN D V O D T U T a Rev. 1.40 O U T 4.5V Line Regulation ¾ Input Voltage ¾ Temperature Coefficient 4.5V ¾ IOUT=80mA -40°C<Ta<85°C 4 January 12, 2006 HT73XX HT7350, +5.0V Output Type Symbol Ta=25°C Test Conditions Parameter VIN Conditions Min. Typ. Max. Unit VOUT Output Voltage 6V IOUT=40mA 4.85 5 5.15 V IOUT(MAX) Maximum Output Current 6V VOUT³4.5V 250 ¾ ¾ mA DVOUT* Load Regulation 6V 1mA£IOUT£100mA ¾ 45 90 mV VDROP** Dropout Voltage ¾ IOUT=40mA ¾ 60 ¾ mV ISS Quiescent Current 6V No load ¾ 3.5 7 mA Line Regulation ¾ IOUT=40mA 6V£VIN£12V ¾ 0.2 0.3 %/V Input Voltage ¾ ¾ ¾ ¾ 12 V Temperature Coefficient 6V ¾ ±0.7 ¾ mV/°C D V D V O U T ´ V IN O U T VIN D V O D T Note: U T a IOUT=80mA -40°C<Ta<85°C ²*² Regulation is measured at constant junction temperature, using pulsed ON time. ²**² Dropout is measured at constant junction temperature, using pulsed ON time, and the criterion is VOUT inside target value ±2%. Application Circuits V IN V C 1 1 0 m F C o m m o n Rev. 1.40 IN H T 7 3 X X S e r ie s V V O U T O U T C 2 1 0 m F G N D S in g le p o in t G N D 5 C o m m o n January 12, 2006 HT73XX Package Information TO-92 Outline Dimensions A B D C I E F G H Symbol A Rev. 1.40 Dimensions in mil Min. Nom. Max. 170 ¾ 200 B 170 ¾ 200 C 500 ¾ ¾ D 11 ¾ 20 E 90 ¾ 110 F 45 ¾ 55 G 45 ¾ 65 H 130 ¾ 160 I 8 ¾ 18 a 4° ¾ 6° 6 January 12, 2006 HT73XX SOT-89 Outline Dimensions I A J B C E D G F Symbol Rev. 1.40 H Dimensions in mil Min. Nom. Max. A 173 ¾ 181 B 64 ¾ 72 C 90 ¾ 102 D 35 ¾ 47 E 155 ¾ 167 F 14 ¾ 19 G 17 ¾ 22 H ¾ 59 ¾ I 55 ¾ 63 J 14 ¾ 17 7 January 12, 2006 HT73XX Product Tape and Reel Specifications TO-92 Reel Dimensions (Unit: mm) P a c k a g e U p , F la t S id e U p 3 0 P a c k a g e U p , F la t S id e D o w n 4 3 5 8 8 8 3 6 0 Rev. 1.40 8 January 12, 2006 HT73XX SOT-89 Reel Dimensions D T 2 A C B T 1 SOT-89 Symbol Description Dimensions in mm A Reel Outer Diameter 180±1.0 B Reel Inner Diameter 62±1.5 C Spindle Hole Diameter D Key Slit Width 1.9±0.15 T1 Space Between Flange 12.4+0.2 T2 Reel Thickness Rev. 1.40 12.75+0.15 17-0.4 9 January 12, 2006 HT73XX TO-92 Carrier Tape Dimensions P D h W 2 H 1 H H 0 l1 W 0 t W 1 W F 1 F 2 D 0 P 2 P 0 TO-92 Symbol Note: Description Dimensions in mm I1 Taped Lead Length (2.5) P Component Pitch 12.7±1.0 P0 Perforation Pitch 12.7±0.3 P2 Component to Perforation (Length Direction) 6.35±0.4 F1 Lead Spread 2.5+0.4 -0.1 F2 Lead Spread 2.5+0.4 -0.1 Dh Component Alignment W Carrier Tape Width 18.0+1.0 -0.5 W0 Hold-down Tape Width 6.0±0.5 W1 Perforation Position 9.0±0.5 W2 Hold-down Tape Position H0 Lead Clinch Height 16.0±0.5 H1 Component Height Less than 24.7 D0 Perforation Diameter 4.0±0.2 t Taped Lead Thickness 0.7±0.2 H Component Base Height 19.0±0.5 0±0.1 (0.5) Thickness less than 0.38±0.05mm~0.5mm P0 Accumulated pitch tolerance: ±1mm/20pitches. ( ) Bracketed figures are for consultation only Rev. 1.40 10 January 12, 2006 HT73XX SOT-89 Carrier Tape Dimensions P 0 D P 1 t E F W C D 1 B 0 P K 0 A 0 SOT-89 Symbol Description Dimensions in mm W Carrier Tape Width 12.0+0.3 -0.1 P Cavity Pitch 8.0±0.1 E Perforation Position 1.75±0.1 F Cavity to Perforation (Width Direction) 5.5±0.05 D Perforation Diameter 1.5+0.1 D1 Cavity Hole Diameter 1.5+0.1 P0 Perforation Pitch 4.0±0.1 P1 Cavity to Perforation (Length Direction) 2.0±0.10 A0 Cavity Length 4.8±0.1 B0 Cavity Width 4.5±0.1 K0 Cavity Depth 1.8±0.1 t Carrier Tape Thickness C Cover Tape Width Rev. 1.40 0.30±0.013 9.3 11 January 12, 2006 HT73XX Holtek Semiconductor Inc. (Headquarters) No.3, Creation Rd. II, Science Park, Hsinchu, Taiwan Tel: 886-3-563-1999 Fax: 886-3-563-1189 http://www.holtek.com.tw Holtek Semiconductor Inc. (Taipei Sales Office) 4F-2, No. 3-2, YuanQu St., Nankang Software Park, Taipei 115, Taiwan Tel: 886-2-2655-7070 Fax: 886-2-2655-7373 Fax: 886-2-2655-7383 (International sales hotline) Holtek Semiconductor Inc. (Shanghai Sales Office) 7th Floor, Building 2, No.889, Yi Shan Rd., Shanghai, China 200233 Tel: 021-6485-5560 Fax: 021-6485-0313 http://www.holtek.com.cn Holtek Semiconductor Inc. (Shenzhen Sales Office) 5/F, Unit A, Productivity Building, Cross of Science M 3rd Road and Gaoxin M 2nd Road, Science Park, Nanshan District, Shenzhen, China 518057 Tel: 0755-8616-9908, 8616-9308 Fax: 0755-8616-9533 Holtek Semiconductor Inc. (Beijing Sales Office) Suite 1721, Jinyu Tower, A129 West Xuan Wu Men Street, Xicheng District, Beijing, China 100031 Tel: 010-6641-0030, 6641-7751, 6641-7752 Fax: 010-6641-0125 Holtek Semiconductor Inc. (Chengdu Sales Office) 709, Building 3, Champagne Plaza, No.97 Dongda Street, Chengdu, Sichuan, China 610016 Tel: 028-6653-6590 Fax: 028-6653-6591 Holmate Semiconductor, Inc. (North America Sales Office) 46729 Fremont Blvd., Fremont, CA 94538 Tel: 510-252-9880 Fax: 510-252-9885 http://www.holmate.com Copyright Ó 2006 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holtek¢s products are not authorized for use as critical components in life support devices or systems. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw. Rev. 1.40 12 January 12, 2006