HT75XX-1 100mA Voltage Regulator Features · Low power consumption · High output current : 100mA (Pd £ 250mW) · Low voltage drop · Output voltage accuracy: tolerance ±3% · Low temperature coefficient · TO-92, SOT-89 and SOT-25 package · High input voltage (up to 24V) Applications · Battery-powered equipment · Audio/Video equipment · Communication equipment General Description Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain variable voltages and currents. The HT75XX-1 series is a set of three-terminal high current low voltage regulator implemented in CMOS technology. They can deliver 100mA output current and allow an input voltage as high as 24V. They are available with several fixed output voltages ranging from 3.0V to 5.0V. CMOS technology ensures low voltage drop and low quiescent current. Selection Table Part No. Output Voltage Tolerance HT7530-1 3.0V ±3% HT7533-1 3.3V ±3% HT7536-1 3.6V ±3% HT7544-1 4.4V ±3% HT7550-1 5.0V ±3% Package TO-92 SOT-89 SOT-25 Marking 75XX-1 (for TO-92) 75XX-1 (for SOT-89) 5XX1 (for SOT-25) Note: ²XX² stands for output voltages. Block Diagram V IN V O U T V re f G N D Rev. 1.10 1 November 18, 2002 HT75XX-1 Pin Assignment T O -9 2 S O T -8 9 7 5 X X -1 S O T -2 5 N C F r o n t V ie w N C 7 5 X X -1 G N D V IN V O U T G N D B o tto m V IN 5 X X 1 V O U T T o p V ie w G N D V IN V O U T G N D V IN V O U T V ie w G N D V IN V O U T Pad Coordinates Pad Assignment 3 V O U T (0 ,0 ) 1 Unit: mm Pad No. X Y 1 -639.00 -406.00 2 618.50 -406.00 3 641.85 392.10 2 V D D V S S Chip size: 1540´1070 (mm)2 *The IC substrate should be connected to VDD in the PCB layout artwork. Absolute Maximum Ratings Supply Voltage ..........................................-0.3V to 26V Storage Temperature ............................-50°C to 125°C Power Consumption (*1) .................................. 250mW Operating Temperature...............................0°C to 70°C Power Consumption (*2) .................................. 150mW Note: These are stress ratings only. Stresses exceeding the range specified under ²Absolute Maximum Ratings² may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. *1: applied to SOT89 and TO-92 *2: applied to SOT-25 Rev. 1.10 2 November 18, 2002 HT75XX-1 Electrical Characteristics HT7530-1, +3.0V output type Symbol Parameter Ta=25°C Test Conditions Conditions VIN VOUT Output Voltage Tolerance 5V IOUT=10mA IOUT Output Current 5V ¾ DVOUT Min. Typ. Max. Unit 2.91 3.0 3.09 V 60 100 ¾ mA 60 150 mV Load Regulation 5V 1mA£IOUT£50mA VDIF Voltage Drop ¾ IOUT=1mA ¾ 100 ¾ mV ISS Current Consumption 5V No load ¾ 3.5 7 mA ¾ 0.2 ¾ %/V ¾ ¾ 24 V ¾ ±0.45 ¾ mV/°C DVOUT DVIN ´ VOUT Line Regulation ¾ 4V£VIN£24V IOUT=1mA VIN Input Voltage ¾ ¾ DVOUT DTa Temperature Coefficient 5V IOUT=10mA 0°C<Ta<70°C HT7533-1, +3.3V output type Symbol Parameter Ta=25°C Test Conditions VIN Min. Typ. Max. Unit 3.201 3.3 3.399 V 60 100 ¾ mA 1mA£IOUT£50mA ¾ 60 150 mV IOUT=1mA ¾ 100 ¾ mV No load ¾ 3.5 7 mA 4.5V£VIN£24V IOUT=1mA ¾ 0.2 ¾ %/V ¾ ¾ 24 V ¾ ±0.5 ¾ mV/°C Conditions VOUT Output Voltage Tolerance 5.5V IOUT=10mA IOUT Output Current 5.5V ¾ DVOUT Load Regulation 5.5V VDIF Voltage Drop ISS Current Consumption DVOUT DVIN ´ VOUT Line Regulation ¾ VIN Input Voltage ¾ DVOUT DTa Temperature Coefficient ¾ 5.5V ¾ IOUT=10mA 0°C<Ta<70°C 5.5V HT7536-1, +3.6V output type Symbol Parameter Ta=25°C Test Conditions VIN Min. Typ. Max. Unit 3.492 3.6 3.708 V 60 100 ¾ mA 1mA£IOUT£50mA ¾ 60 150 mV IOUT=1mA ¾ 100 ¾ mV No load ¾ 3.5 7 mA 4.6V£VIN£24V IOUT=1mA ¾ 0.2 ¾ %/V ¾ ¾ 24 V ¾ ±0.6 ¾ mV/°C Conditions VOUT Output Voltage Tolerance 5.6V IOUT=10mA IOUT Output Current 5.6V ¾ DVOUT Load Regulation 5.6V ¾ VDIF Voltage Drop ISS Current Consumption DVOUT DVIN ´ VOUT Line Regulation ¾ VIN Input Voltage ¾ DVOUT DTa Temperature Coefficient Rev. 1.10 5.6V ¾ IOUT=10mA 0°C<Ta<70°C 5.6V 3 November 18, 2002 HT75XX-1 HT7544-1, +4.4V output type Symbol Parameter Ta=25°C Test Conditions Min. Typ. Max. Unit 4.268 4.4 4.532 V 60 100 ¾ mA 1mA£IOUT£50mA ¾ 60 150 mV IOUT=1mA ¾ 100 ¾ mV No load ¾ 3.5 7 mA 5.4V£VIN£24V IOUT=1mA ¾ 0.2 ¾ %/V ¾ ¾ 24 V ¾ ±0.7 ¾ mV/°C Conditions VIN VOUT Output Voltage Tolerance 6.4V IOUT=10mA IOUT Output Current 6.4V ¾ DVOUT Load Regulation 6.4V VDIF Voltage Drop ISS Current Consumption DVOUT DVIN ´ VOUT Line Regulation ¾ VIN Input Voltage ¾ DVOUT DTa Temperature Coefficient ¾ 6.4V 6.4V ¾ IOUT=10mA 0°C<Ta<70°C HT7550-1, +5.0V output type Symbol Parameter Ta=25°C Test Conditions VIN Conditions Min. Typ. Max. Unit VOUT Output Voltage Tolerance 7V IOUT=10mA 4.85 5.0 5.15 V IOUT Output Current 7V ¾ 100 150 ¾ mA DVOUT Load Regulation 7V 1mA£IOUT£70mA ¾ 60 150 mV VDIF Voltage Drop ¾ IOUT=1mA ¾ 100 ¾ mV ISS Current Consumption 7V No load ¾ 3.5 7 mA DVOUT DVIN ´ VOUT Line Regulation ¾ 6V£VIN£24V IOUT=1mA ¾ 0.2 ¾ %/V VIN Input Voltage ¾ ¾ ¾ ¾ 24 V DVOUT DTa Temperature Coefficient 7V ¾ ±0.75 ¾ mV/°C Rev. 1.10 IOUT=10mA 0°C<Ta<70°C 4 November 18, 2002 HT75XX-1 Application Circuits Basic circuit V IN V H T 7 5 X X -1 S e r ie s IN C 1 1 0 m F V V O U T O U T C 2 1 0 m F G N D C o m m o n C o m m o n S in g le p o in t G N D High output current positive voltage regulator T r1 V V IN H T 7 5 X X -1 S e r ie s IN R 1 V V O U T G N D C 1 1 0 m F O U T C 2 1 0 m F C o m m o n C o m m o n S in g le p o in t G N D Short-Circuit protection for Tr1 V R s IN T r1 V IN R 1 C 1 1 0 m F H T 7 5 X X -1 S e r ie s V V O U T C 2 1 0 m F G N D C o m m o n O U T C o m m o n S in g le p o in t G N D Circuit for increasing output voltage V V IN C 1 1 0 m F IN H T 7 5 X X -1 S e r ie s G N D IS V V O U T C 2 1 0 m F S V X X O U T R 1 R 2 C o m m o n S in g le p o in t G N D VOUT = VXX ( 1 + Rev. 1.10 5 C o m m o n R2 ) + ISS R2 R1 November 18, 2002 HT75XX-1 Circuit for increasing output voltage V V IN IN V H T 7 5 X X -1 S e r ie s C 1 1 0 m F G N D IS V O U T C 2 V 1 0 m F S X X O U T R 1 D 1 C o m m o n S in g le p o in t G N D C o m m o n VOUT = VXX + VD1 Constant current regulator V V IN IN V H T 7 5 X X -1 S e r ie s C 1 1 0 m F G N D IS O U T C 2 1 0 m F V S X X R A IO U T R L C o m m o n IOUT = VXX + ISS RA Dual supply IC 1 V V IN IN H T 7 5 X X -1 S e r ie s IC 2 V C 1 1 0 m F IN H T 7 5 X X -1 S e r ie s G N D V O U T O U T V C 2 1 0 m F C o m m o n Rev. 1.10 O U T C 3 1 0 m F G N D V V O U T R 1 C o m m o n 6 November 18, 2002 HT75XX-1 Package Information 3-pin TO-92 outline dimensions A B D C E F G H Symbol A Rev. 1.10 Dimensions in mil Min. Nom. Max. 170 ¾ 200 B 170 ¾ 200 C 500 ¾ ¾ D 11 ¾ 20 E 90 ¾ 110 F 45 ¾ 55 G 45 ¾ 65 H 130 ¾ 160 I 8 ¾ 18 a 4° ¾ 6° 7 November 18, 2002 HT75XX-1 3-pin SOT-89 outline dimensions I A J B C E D G F Symbol Rev. 1.10 H Dimensions in mil Min. Nom. Max. A 173 ¾ 181 B 64 ¾ 72 C 90 ¾ 102 D 35 ¾ 47 E 155 ¾ 167 F 14 ¾ 19 G 17 ¾ 22 H ¾ 59 ¾ I 55 ¾ 63 J 14 ¾ 17 8 November 18, 2002 HT75XX-1 5-pin SOT-25 outline dimensions D C L H E q e A A 2 b Symbol Rev. 1.10 A 1 Dimensions in mm Min. Nom. Max. A 1.00 ¾ 1.30 A1 ¾ ¾ 0.10 A2 0.70 ¾ 0.90 b 0.35 ¾ 0.50 C 0.10 ¾ 0.25 D 2.70 ¾ 3.10 E 1.40 ¾ 1.80 e ¾ 1.90 ¾ H 2.60 ¾ 3 L 0.37 ¾ ¾ q 1° ¾ 9° 9 November 18, 2002 HT75XX-1 Product Tape and Reel Specifications TO-92 reel dimensions (Unit: mm) P a c k a g e U p , F la t S id e U p 3 0 P a c k a g e U p , F la t S id e D o w n 4 3 5 8 8 8 3 6 0 Rev. 1.10 10 November 18, 2002 HT75XX-1 SOT-89 & SOT-25 reel dimensions D T 2 A C B T 1 SOT-89 Symbol Description Dimensions in mm A Reel Outer Diameter 180±1.0 B Reel Inner Diameter 62±1.5 C Spindle Hole Diameter D Key Slit Width 1.9±0.15 T1 Space Between Flange 12.4+0.2 T2 Reel Thickness 12.75+0.15 17-0.4 SOT-25 Symbol Description Dimensions in mm A Reel Outer Diameter 178±1.0 B Reel Inner Diameter 62±1.0 C Spindle Hole Diameter 13.0±0.2 D Key Slit Width 2.5±0.25 T1 Space Between Flange 8.4+1.5 -0.0 T2 Reel Thickness 11.4+1.5 Rev. 1.10 11 November 18, 2002 HT75XX-1 TO-92 carrier tape dimensions P D h W 2 H 1 H H 0 l1 W 0 t W 1 W F 1 F 2 D 0 P 2 P 0 TO-92 Symbol Note: Description Dimensions in mm I1 Taped Lead Length (2.5) P Component Pitch 12.7±1.0 P0 Perforation Pitch 12.7±0.3 P2 Component to Perforation (Length Direction) 6.35±0.4 F1 Lead Spread 2.5+0.4 -0.1 F2 Lead Spread 2.5+0.4 -0.1 Dh Component Alignment W Carrier Tape Width 18.0+1.0 -0.5 W0 Hold-down Tape Width 6.0±0.5 W1 Perforation Position 9.0±0.5 W2 Hold-down Tape Position H0 Lead Clinch Height 16.0±0.5 H1 Component Height Less than 24.7 D0 Perforation Diameter 4.0±0.2 t Taped Lead Thickness 0.7±0.2 H Component Base Height 19.0±0.5 0±0.1 (0.5) Thickness less than 0.38±0.05mm~0.5mm P0 Accumulated pitch tolerance: ±1mm/20pitches. ( ) Bracketed figures are for consultation only Rev. 1.10 12 November 18, 2002 HT75XX-1 SOT-89 & SOT-25 carrier tape dimensions P 0 D P 1 t E F W C D 1 B 0 P K 0 A 0 SOT-89 Symbol Description Dimensions in mm W Carrier Tape Width 12.0+0.3 -0.1 P Cavity Pitch 8.0±0.1 E Perforation Position 1.75±0.1 F Cavity to Perforation (Width Direction) 5.5±0.05 D Perforation Diameter 1.5+0.1 D1 Cavity Hole Diameter 1.5+0.1 P0 Perforation Pitch 4.0±0.1 P1 Cavity to Perforation (Length Direction) 2.0±0.10 A0 Cavity Length 4.8±0.1 B0 Cavity Width 4.5±0.1 K0 Cavity Depth 1.8±0.1 t Carrier Tape Thickness C Cover Tape Width 0.30±0.013 9.3 SOT-25 Symbol Description Dimensions in mm W Carrier Tape Width P Cavity Pitch E Perforation Position F Cavity to Perforation (Width Direction) 3.5±0.05 8.0±0.3 4.0 1.75 D Perforation Diameter 1.5+0.1 D1 Cavity Hole Diameter 1.5+0.1 P0 Perforation Pitch 4.0 P1 Cavity to Perforation (Length Direction) 2.0 A0 Cavity Length 3.15 B0 Cavity Width 3.2 K0 Cavity Depth 1.4 t Carrier Tape Thickness C Cover Tape Width Rev. 1.10 0.20±0.03 5.3 13 November 18, 2002 HT75XX-1 Holtek Semiconductor Inc. (Headquarters) No.3, Creation Rd. II, Science-based Industrial Park, Hsinchu, Taiwan Tel: 886-3-563-1999 Fax: 886-3-563-1189 http://www.holtek.com.tw Holtek Semiconductor Inc. (Sales Office) 11F, No.576, Sec.7 Chung Hsiao E. Rd., Taipei, Taiwan Tel: 886-2-2782-9635 Fax: 886-2-2782-9636 Fax: 886-2-2782-7128 (International sales hotline) Holtek Semiconductor (Shanghai) Inc. 7th Floor, Building 2, No.889, Yi Shan Rd., Shanghai, China Tel: 021-6485-5560 Fax: 021-6485-0313 http://www.holtek.com.cn Holtek Semiconductor (Hong Kong) Ltd. RM.711, Tower 2, Cheung Sha Wan Plaza, 833 Cheung Sha Wan Rd., Kowloon, Hong Kong Tel: 852-2-745-8288 Fax: 852-2-742-8657 Holmate Semiconductor, Inc. 48531 Warm Springs Boulevard, Suite 413, Fremont, CA 94539 Tel: 510-252-9880 Fax: 510-252-9885 http://www.holmate.com Copyright Ó 2002 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw. Rev. 1.10 14 November 18, 2002