LESHAN RADIO COMPANY, LTD. Low Capacitance Q uad Array for ESD Protection General Description This integrated transient voltage suppressor device (TVS) is designed for applications requiring transient overvoltage protection. It is intended for use in sensitive equipment such as computers, printers, business machines, communication systems, medical equipment, and other applications. Its integrated design provides very effective and reliable protection for four separate lines using only one package. These devices are ideal for situations where board space is at a premium. LESDA6V8AW5T1G S-LESDA6V8AW5T1G Features • ESD Protection: IEC61000−4−2: Level 4 • • • • • • • MILSTD 883C − Method 3015−6: Class 3 Four Separate Unidirectional Configurations for Protection Low Leakage Current < 1 A Power Dissipation: 380 mW Small SC−88A SMT Package Low Capacitance Pb−Free Package is Available S- Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable. SC−88A/SOT−353 Benefits • Provides Protection for ESD Industry Standards: IEC 61000, HBM • Protects the Line Against Transient Voltage Conditions in Either • • Direction Minimize Power Consumption of the System Minimize PCB Board Space Typical Applications • Instrumentation Equipment • Serial and Parallel Ports • Microprocessor Based Equipment • Notebooks, Desktops, Servers • Cellular and Portable Equipment ORDERING INFORMATION Device LESDA6V8AW5T1G S-LESDA6V8AW5T1G Marking Shipping 6H 3000/Tape & Reel Rev.O 1/4 LESHAN RADIO COMPANY, LTD. LESDA6V8AW5T1G , S-LESDA6V8AW5T1G MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating Symbol Value Unit Peak Power Dissipation 8 20 sec Double Exponential Waveform (Note 1) PPK 20 W Steady State Power − 1 Diode (Note 2) PD 200 mW 327 3.05 °C/W mW/°C Thermal Resistance − Junction−to−Ambient Above 25°C, Derate RJA Operating Junction Temperature Range TJ −40 to +125 °C Storage Temperature Range Tstg −55 to +150 °C Lead Solder Temperature − Maximum 10 Seconds Duration TL 260 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Non−repetitive current pulse per Figure 1. 2. Only 1 diode under power. For all 4 diodes under power, PD will be 25%. Mounted on FR4 board with min pad. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Typ Max Unit VBR 6.4 6.8 7.1 V Leakage Current (VRWM = 5.0 V) IR − − 1.0 A Clamping Voltage 1 (IPP = 1.6 A, 8 20 sec Waveform) VC − − 13 V Maximum Peak Pulse Current (8 20 sec Waveform) IPP − − 1.6 A Junction Capacitance − (VR = 0 V, f = 1 MHz) − (VR = 3.0 V, f = 1 MHz) CJ − − 12 6.7 15 9.5 pF Characteristic Breakdown Voltage (IT = 1 mA) (Note 3) 3. VBR is measured at pulse test current IT. Rev.O 2/4 LESHAN RADIO COMPANY, LTD. LESDA6V8AW5T1G , S-LESDA6V8AW5T1G 110 % OF RATED POWER OR IPP Ppk, PEAK SURGE POWER (W) 100 10 10 100 90 80 70 60 50 40 30 20 10 0 1 1 100 1000 50 75 100 Figure 2. Power Derating Curve 150 14 0.14 0.12 0.10 0.08 0.06 0.04 0.02 12 TA = 25°C 10 8 6 4 2 0 0 −60 −40 0 20 40 60 80 100 2 3 4 5 Figure 3. Reverse Leakage versus Temperature Figure 4. Capacitance 70 60 HALF VALUE IRSM/2 @ 20 s 50 6 1 PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAY = 8 s 40 tP 20 1 BIAS VOLTAGE (V) 80 30 0 T, TEMPERATURE (°C) PEAK VALUE IRSM @ 8 s tr 90 −20 IF, FORWARD CURRENT (A) 100 0.1 0.01 10 0 125 Figure 1. Pulse Width TYPICAL CAPACITANCE (pF) 1 MHz FREQUENCY IR, REVERSE LEAKAGE (A) 25 TA, AMBIENT TEMPERATURE (°C) 0.16 % OF PEAK PULSE CURRENT 0 t, TIME (s) TA = 25°C 0.001 0 20 40 60 80 0.6 0.8 1.0 1.2 1.4 1.6 t, TIME (s) VF, FORWARD VOLTAGE (V) Figure 5. 8 × 20 s Pulse Waveform Figure 6. Forward Voltage Rev.O 3/4 1.8 LESHAN RADIO COMPANY, LTD. LESDA6V8AW5T1G , S-LESDA6V8AW5T1G SC−88A/SOT−353 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A−01 OBSOLETE. NEW STANDARD 419A−02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. A G 5 4 DIM A B C D G H J K N S −B− S 1 2 3 D 5 PL 0.2 (0.008) B M M N INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC −−− 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC −−− 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 J C K H SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm inches Rev.O 4/4