EGP30A thru EGP30M Glass Passivated Junction High Efficiency Rectifiers Reverse Voltage 50 to 1000V FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High temperature metallurgically bonded construction * Cavity-free glass passivated junction * Capable of meeting environmental standards of MIL-S-19500 * For use in high frequency rectifier circuits * Fast switching for high efficiency * High temperature soldering guaranteed: 260°C/10 seconds * 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-210AD molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.038 oz., 1.03 g Handling precautin:None We declare that the material of product compliance with ROHS requirements 1.Electrical Characteristic Maximum & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 EGP 30J EGP 30J 600 Maximum RSM voltage VRSM 35 70 105 140 210 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 600 800 1000 V Parameter Symbol symbol Making Maximum average forward rectified current 0.375" (9.5mm) lead length at TA = 75°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Typical thermal resistance (Note 2) Operating junction and storage temperature range EGP 30A EGP 30A EGP 30B EGP 30B EGP 30C EGP 30C EGP 30D EGP 30D EGP 30F EGP 30F EGP 30G EGP 30G EGP 30K EGP 30K 800 EGP 30M EGP 30M 1000 Unit V IF(AV) 3.0 A IFSM 125 A RθJA TJ, TSTG 55 –50 to +150 °C/W °C Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol symbol Maximum Instantaneous Forward Voltage (IF = 3.0 Amps, TJ = 25°C) VF Maximum full load reverse current, full cycle average,0.375"(9.5mm) lead lengths (Rated dc Voltage, TJ = 25°C) (Rated dc Voltage, TJ = 125°C) IR EGP 30A EGP 30B EGP 30C EGP 30D 0.95 Typical reverse recovery time (Note 1) trr Typical junction capacitance at 4.0V, 1MHz CJ NOTES: 1. IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted EGP 30F EGP 30G 1.25 EGP 30J EGP 30K 1.70 Unit V µA 10.0 200 50 50 EGP 30M 75 40 ns PF EGP30A thru EGP30M 2.Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted ) 4.0 2.0 0.375" (9.5mm) Lead Length 0 0 Instantaneous Forward Current (A) 100 1.0 TJ = 25°C Pulse width = 300µs 1% Duty Cycle 0.1 100 10 10 Number of Cycles at 60Hz 100 100 10 Tj=125℃ 1.0 0.10 0.01 Fig 5. –typical transient thermal impedance Tj=25℃ 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 6. – Typical Junction Capacitance Junction Capacitance (pF) 100 10 1.0 0.1 0.1 1.0 10 t,Pulse duration,sec TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) Fig 4. – Typical Reverse Characteristics 0.8 1.2 1.6 2.0 2.4 Instantaneous Forward Voltage (V) 0.01 Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 0 Fig 3. – Typical Instantaneous Forward Characteristics 10 100 200 25 50 75 100 125 150 175 Ambient Temperature, °C 0.01 0.4 Transient thermal impedance(°C/W) Average Forward Rectified Current (A) 60 Hz Resistive or Inductive Load Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 100 10 1.0 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 0.1 0.01 0.1 1.0 10 Reverse Voltage (V) 100 50 EGP30A thru EGP30M 3. dimension: 文件编号: WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 第 0 次修改 1 页 1 弹带盒装 ammo and box 1.1. 弹带盒规格 ammo spec. 单位:mm L W H T52 262±2 76±2 90±2 T42 T26 262±2 250±3 64±2 45±3 90±2 95±3 1.2 弹带内盒要求 inner box spec. ROHS标签 label LRC标签 label 文件编号: WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 第 0 次修改 2 页 1.4 标签要求 label spec. 1.4.1 LRC标签 LRC label ******* 成型规格forming spec. LRC产品型号 type 产品重复峰压值 peak repetive voltage **** 产品额定电流值 average output current ** 产品数量 quantity **** ******* 产品生产日期 date 1.4.2环保标签 environmental protection label 2.外箱规格 cartoon spec. 单位:mm H W L W H T52 430±2 280±2 225±2 T42 410±2 285±2 300±2 T26 435±3 280±3 295±3 外箱标签cartoon label L 3 按以上包装方式,编带数量和外包装箱产品数量:typing and cartoon spec. 塑封外型 A-405 & DO-41 & R-1 R-3 DO-15 DO-201AD 每根编带数量 quantity/ammo 3K 1.8K 2K(T52) 1.8K(T26) 0.8K 外箱数量(T52编带) quantity/cartoon 30K 18K 20K 8.0K 外箱数量(T26编带) quantity/cartoon 60K 36K 36K - 外箱数量(T42编带) quantity/cartoon 54K 32.4K 36K - 文件编号: WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 第 3 页 4 编带规格 brede spec 编带尺寸 typing dimension 尺寸代号 W 26/tape 35/tape 40/tape 26 0.0/+1.6 35 -1.0/+0.5 40 -1.0/+0.5 42/tape 52/tape 52/tape# 42 -1.0/+1.0 52 -1.0/+2.0 52 -1.0/+2.0 P 5±0.5 5±0.5 5±0.5 5±0.5 5±0.5 L1-L2 <1.0 <1.0 <1.0 <1.0 <1.0 <1.0 H 6±1.0 6±1.0 6±1.0 6±1.0 6±1.0 6±1.0 10±0.5 Z <1.0 <1.0 <1.0 <1.0 <1.0 <1.0 R <1.0 <1.0 <1.0 <1.0 <1.0 <1.0 T >3.5 >3.5 >3.5 >3.5 >3.5 注: 52编带# 为DO-201AD编带规格 "52编带#" just for D0-201AD >3.5 1. 红白编带厚度为0.05mm;两种胶带各自之间无明显色差;编带要求均为胶带。 The typing thickness is 0.05mm and color is obvious difference 2. 两端引带20~40cm. Typing lead over 20~40cm 3. 红色编带一端为二极管“负极”;白色编带一端为二极管“正极”。 red color is cathode ,white color is anode 4. 无卤 green epoxy compound(无卤产品才贴HF only) Green EGP30A thru EGP30M 4. Update Record 版次 更新记录 更新作者 更新日期 1 第一版 周杰 2010-6-22 2 增加包装规范 周杰 2011-7-18