lgsot08clt1g

LESHAN RADIO COMPANY, LTD.
Dual Transient Voltage Suppressors Array for ESD Protection
General Description
The LGSOT08CLT1G is a dual monolithic voltage
suppressor designed to protect components which
are connected to data and transmission lines against
ESD. It clamps the voltage just above the logic level
supply for positive transients, and to a diode drop
below ground for negative transients. It can also
work as bidirectional suppressor by connecting only
pin1 and 2.
LGSOT08CLT1G
S-LGSOT08CLT1G
3
1
2
SOT– 23
Applications
z
z
z
Computers
Printers
Communication systems
Features
z
2 Unidirectional Transil functions
z
z
z
Low leakage current: IR max< 20 μA at VRM
300W peak pulse power(8/20μs)
Transient protection for data lines as per
IEC61000-4-2(ESD) 15KV(air) 8KV(contact)
IEC61000-4-5(Lightning) see IPPM below
S- Prefix for Automotive and Other Applications
Requiring Unique Site and Control Change
Requirements; AEC-Q101 Qualified and PPAP Capable.
z
ORDERING INFORMATION
Device
LGSOT08CLT1G
S-LGSOT08CLT1G
Package
SOT–23
Shipping
3000/Tape & Reel
Absolute Ratings (Tamb=25°C )
Symbol
Parameter
Value
Units
PPP
Peak Pulse Power (tp = 8/20μs)
300
W
TL
Maximum lead temperature for soldering during 10s
260
°C
Tstg
Storage Temperature Range
-55 to +150
°C
Top
Operating Temperature Range
-40 to +125
°C
Tj
Maximum junction temperature
150
°C
IEC61000-4-2 air discharge
15
kv
IEC61000-4-2 contact discharge
8
Electrostatic discharge
VPP
Rev.O 1/5
LESHAN RADIO COMPANY, LTD.
LGSOT08CLT1G , S-LGSOT08CLT1G
Electrical Parameter
Symbol
Parameter
VRM
Stand-off voltage
VBR
Breakdown voltage
VCL
Clamping voltage
IRM
Leakage current
IPPM
Peak pulse current
Electrical Characteristics
Maximum
Minimum
Maximum
Maximum
Leakage
Breakdown
Clamping
Pulse Peak
Current
Voltage
Voltage
Current
@ VRM
1mA
VRM
IRM
VBR
V
µA
V
V
LGSOT04CLT1G
4.0
20.0
5.0
LGSOT05CLT1G
5.0
20.0
LGSOT08CLT1G
8.0
LGSOT12CLT1G
LGSOT15CLT1G
Rated
Stand-off
Part Numbers
Maximum
Capacitance
Voltage
1A
1)
5A
1)
tp=8/20us
0v, 1MHz
IPPM
C
V
A
pF
8.5
10.5
17
300
6.0
9.8
12.5
17
220
5.0
8.5
13.4
15.0
15
190
12.0
1.0
13.3
19.0
28.0
12
90
15.0
1.0
16.7
24
39.0
10
60
VCL
1).8/20 waveform used. (see fig2.)
Typical Characteristics
Fig1. Peak Pulse Power
VS Pulse Time
Rev.O 2/5
LESHAN RADIO COMPANY, LTD.
LGSOT08CLT1G , S-LGSOT08CLT1G
Fig2. Pulse Waveform
Fig3.Power Derating
Rev.O 3/5
LESHAN RADIO COMPANY, LTD.
LGSOT08CLT1G , S-LGSOT08CLT1G
Application Note
Electrostatic discharge (ESD) is a major cause of failure in electronic systems. Transient Voltage
Suppressors (TVS) are an ideal choice for ESD protection. They are capable of clamping the incoming transient
to a low enough level such that damage to the protected semiconductor is prevented.
Surface mount TVS arrays offer the best choice for minimal lead inductance. They serve as parallel
protection elements, connected between the signal line to ground. As the transient rises above the operating
voltage of the device, the TVS array becomes a low impedance path diverting the transient current to ground.
The LGSOT08CLT1G array is the ideal board evel protection of ESD sensitive semiconductor components.
The tiny SOT23 package allows design flexibility in the design of high density boards where the space
saving is at a premium. This enables to shorten the routing and contributes to hardening againt ESD.
Rev.O 4/5
LESHAN RADIO COMPANY, LTD.
LGSOT08CLT1G , S-LGSOT08CLT1G
SOT-23
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M,1982
2. CONTROLLING DIMENSION: INCH.
A
L
3
1
V
2
DIM
B S
G
C
D
H
K
J
MIN
0.1102
0.0472
0.0350
0.0150
0.0701
0.0005
0.0034
0.0140
0.0350
0.0830
0.0177
A
B
C
D
G
H
J
K
L
S
V
INCHES
MAX
0.1197
0.0551
0.0440
0.0200
0.0807
0.0040
0.0070
0.0285
0.0401
0.1039
0.0236
MILLIMETERS
MIN
MAX
2.80
3.04
1.20
1.40
0.89
1.11
0.37
0.50
1.78
2.04
0.013
0.100
0.085
0.177
0.35
0.69
0.89
1.02
2.10
2.64
0.45
0.60
0.037
0.95
0.037
0.95
0.079
2.0
0.035
0.9
0.031
0.8
inches
mm
Rev.O 5/5