66012 FOUR CHANNEL, HERMETICALLY SEALED, LOW-INPUT CURRENT, 6N140 OPTOCOUPLER MICROPAC OPTOELECTRONIC PRODUCTS DIVISION 12/01/2006 Features: Applications: • • • • • • • • • • DSCC Approved 8302401EX High current transfer ratio: 1000% typical 1500 Vdc isolation test voltage Low input current requirement: 0.5 mA Faraday Shield to provide high Common Mode Rejection Military and Space High reliability systems Voltage Level Shifting Isolated Receiver Input Communication systems DESCRIPTION The 66012 optocoupler contains four infrared LEDs optically coupled to four corresponding high gain photon detectors. This unique quad optocoupler provides high CTR and low leakage currents over the full military temperature range (-55° to +125°C). The 66012 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534 screened versions or tested to customer specifications. ABSOLUTE MAXIMUM RATINGS Peak Forward Input Current (each channel) (1ms duration)............................................................................................... 20 mA Average Forward Input Current (each channel)...................(Note 1)................................................................................. 10 mA Reverse Input Voltage ..............................................................................................................................................................5 V Output Current - IO (each channel) ..................................................................................................................................... 40 mA Output Power Dissipation (each channel) ...........…………..(Note 2)............................................................................... 50 mW Supply Voltage - VCC .............................................………….(Note 3)......................................................................... -0.5 to 20 V Output Voltage - VO (each channel).……............………….(Note 3) ....................................................................... . -0.5 to 20 V Operating Free-Air Temperature Range.............................................................................................................. -55°C to +125°C Storage Temperature........................................................................................................................................... -65°C to +150°C Lead Solder Temperature (10 second max, 1/16” below seating plane)............................................................................. 260°C Notes: 1. Derate IF at 0.10 mA/°C above 25°C. 2. Collector output power plus one fourth of the total supply power is total output power. Derate at 0.5mW/°C above 25°C. 3. The lowest total IOH over temperature is developed by keeping VCC as low as possible, but greater that 2 Volts. The most negative voltage at the detector side should be applied to Pin 10. Package Dimensions Schematic Diagram K 1 0.790 [20.06] 0.820 [20.83] 15 VCC 14 V01 13 V02 12 V03 11 V04 10 GND A 2 DATE CODE XXXX Mii 6N140 0.320 [8.13] MAX A 3 K 4 PIN 1 0.170 [4.32] MAX K 5 0.020 [0.51] A 6 0.150 [3.81] A 7 0.090 [2.29] 0.110 [2.79] 0.020 [0.51] MAX ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 0.007 [0.18] 0.013 [0.33] 0.290 [7.37] 0.310 [7.87] K 8 MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66012 FOUR CHANNEL, HERMETICALLY SEALED, LOW-INPUT CURRENT, 6N140 OPTOCOUPLER 12/01/2006 ELECTRICAL CHARACTERISTICS Ta = -55°C to 125°C unless otherwise specified. PARAMETER SYMBOL MIN TYP CTR 300 300 200 1000 750 400 Current Transfer Ratio MAX UNITS TEST CONDITIONS NOTE % % % IF = 0.5 mA, VO = 0.4 V, VCC = 4.5 V IF = 1.6 mA, VO = 0.4 V, VCC = 4.5 V IF = 5.0 mA, VO = 0.4 V, VCC = 4.5 V 1, 2 1, 2 1, 2 V V IF = 0.5 mA, IOL = 1.5 mA, VCC = 4.5 V IF = 5.0 mA, IOL = 10 mA, VCC = 4.5 V 1 1, 3 VOL 0.1 0.2 0.4 0.4 Logic High Output Current IOH .005 250 µA IF = 2 µA, VO = VCC = 18 V High Level Output Current ICCH .010 40 µA IF1 =IF2 =IF3 =IF4 = 0 mA, VCC = 18 V Low Level Supply Current ICCL 2 4 mA IF1= IF2 = IF3 = IF4=1.6 mA, VCC = 18 V VF 1.4 1.8 V IF = 1.6 mA 1 V IR = 10 µA 1 VI—0 = 1500 Vdc, Relative Humidity = 45% tA = 25°C, t = 5 s 4 Logic Low Output Voltage Input Forward Voltage Input Reverse Breakdown Voltage BVR Input-Output Insulation Leakage Current 5 II—O 1.0 µA Propagation Delay Time To High Output Level tPLH 60 30 µs Propagation Delay Time To Low Output Level tPHL 100 10 µs TYPICAL CHARACTERISTICS Ta = 25°C, VCC = 5V Each Channel PARAMETER SYMBOL MIN TYP MAX µs µs IF = 0.5 mA, VCC = 5.0 V, RL = 4.7 kΩ IF = 5 mA, VCC = 5.0 V, RL = 680 kΩ IF = 0.5 mA, VCC = 5.0 V, RL = 4.7 kΩ IF = 5 mA, VCC = 5.0 V, RL = 680 kΩ UNITS TEST CONDITIONS Input Capacitance CIN 60 pF VF = 0, f = 1 MHz, ta = 25°C 1 Capacitance (Input-Output) CI-O 1.5 pF f = 1 MHz, ta = 25°C 1, 5 Input Diode Temperature Coefficient -1.8 mV/°C IF = 1.6 mA ∆TA ∆VF 12 Resistance (Input-Output) RI-0 10 Resistance (Input-Input) RI-I 10 Input-Input Insulation Leakage Current II-I Common Mode Transient immunity at High Output Level CMH Ω Ω 12 500 NOTE 1 ° VI—O = 500 V, ta = 25 C 1, 5 VI—I = 500 V, ta = 25°C 6 6 7,9 0.5 nA Relative Humidity = 45% VI—I = 500 V, t = 5 s 1000 V/µs VCM = 50 VP-P ,VCC = 5.0 V, RL = 1.5kΩ, IF = 0 mA Common Mode Transient Immunity 500 VCM = 50 VP-P ,VCC = 5.0 V, 1000 V/µs CML 8,9 at Low Output Level RL = 1.5 kΩ, IF = 1.6 mA NOTES: 1. Each channel. 2. CURRENT TRANSFER RATIO is defined as the ratio of output collector current, IO, to the forward LED input current., IF , times 100%. 3. IF = 2 µA for channel under test. For all other channels, IF = 10 mA. 4. Device considered a two-terminal device. Pins 1-8 are shorted together and pins 9-16 are shorted together. 5. Measured between each input pair shorted together and all output pins for that channel shorted together. 6. Measured between adjacent pairs shorted together, i.e. between pins 1 and 2 shorted together and pins 3 and 4 shorted together, etc. 7. CMH is the maximum tolerable common mode transient to assure that the output will remain in a high logic state (ie. VO > 2.0 V). 8. CML is the maximum tolerable common mode transient to assure that the output will remain in a low logic state (ie. VO < 0.8 V). 9. In applications where dv/dt may exceed 50,000 V/µs (such as static discharge) a series resistor, RCC , should be included to protect the detector ICs from destructively high surge currents. The recommended value is RCC = 1V = kΩ 0.6IF (mA) RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 2 UNITS µA Input Current, High Level IFH 0.5 5 mA Supply Voltage VCC 2.0 18 V SELECTION GUIDE PART NUMBER 66012-001 66012-002 66012-003 PART DESCRIPTION DSCC Dwg 8302401EX Commercial, military temperature range (-55°C to +125°C) Commercial (0° to +70°C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM