1N649X 62034 JAN QUALIFIED FAULT INDICATORS MICROPAC 1N650X OPTOELECTRONIC PRODUCTS DIVISION 12/01/03 Features: Applications: • • • • • • • • • • • MIL-PRF-19500 Hermetically sealed Pin compatible with Dialight 547 and 555 series Available with Internal Current Regulation (5 to 30 VDC) Wide operating temperature range (-55°C to +100°C) Ceramic Insulator for Side by Side Mounting P.C. Board Fault Indicator Logic Status Indicator Binary Data Display ON-OFF Indicator Right Angle Viewing DESCRIPTION The 1N649X, 1N650X series indicator lamps are useful in a variety of applications such as fault indicators for trouble shooting at the P.C. board level. The red and yellow fault indicators utilize a high efficiency GaAsP on GaP LED, while the green indicator utilizes a GaP on GaP LED. Each type uses a colored diffused plastic lens over a glass window. All are hermetically sealed and available JANTX screened. ABSOLUTE MAXIMUM RATINGS Reverse Voltage ......................................................................................................................................................................5 V Power Dissipation (Note 1). ............................................................................................................................................ 105 mW Forward Current (For part numbers 1N6493, 94, 95 and 1N6500, 01, 02) .......................................................................35 mA Forward Voltage (For part numbers 1N6497, 98, 99 and 1N6503, 04, 05) ......................................................................30 Vdc Storage Temperature......................................................................................................................................... -65°C to +100°C Operating Temperature...................................................................................................................................... -55°C to +100°C Lead Solder Temperature (10 seconds, 1/16” from case) ................................................................................................. 260°C NOTES: 1. Derate linearly at the rate of 1.4 mW/°C above 25°C. Package Dimensions 0.099 [2.51] 0.093 [2.36] 0.128 [3.25] 0.112 [3.84] Schematic Diagram A 0.099 [2.51] 0.093 [2.36] 0.328 [8.33] 0.312 [7.92] 0.045 [1.14] TYP. 0.005 TYP. 0.005 TYP. 0.082 [2.08] 0.079 [2.01] 0.127 [3.23] 0.123 [3.12] 0.445 [11.30] 0.385 [9.78] 0.145 [3.68] 0.125 [3.18] 0.022 [0.56] 0.020 [0.51] 0.127 [3.23] 0.123 [3.12] 0.127 [3.23] 0.123 [3.12] 0.445 [11.30] 0.385 [9.78] CERAMIC INSULATOR A K K STANDARD VERSION 0.127 [3.23] 0.123 [3.12] 0.145 [3.68] 0.125 [3.18] A A 0.022 [0.56] 0.020 [0.51] 0.022 [0.56] 0.018 [0.46] 0.045 [1.14] TYP. 0.082 [2.08] 0.079 [2.01] 0.100 [2.54] TYP. 1N649X 1N650X CERAMIC INSULATOR 0.022 [0.56] 0.018 [0.46] 0.300 [7.62] TYP. K K CURRENT REGULATED VERSION ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 62034 1N649X 1N650X JAN QUALIFIED FAULT INDICATORS 12/01/03 *ELECTRICAL/OPTICAL CHARACTERISTICS (TA=25°C unless otherwise specified) TEST CONDITIONS PARAMETER LIMITS PEAK λ IV1 (θ = 0°) IV2 (θ = 15°) VF IF C nm mcd mcd V mA pF TYP. MIN. MIN. MAX. MIN. – MAX. MAX. 635 (Red) 1 0.5 3 100 0.5 0.25 3.5 - 7.5 500 3 100 3.5 - 7.5 500 3 100 3.5 - 7.5 500 IF VF mA VDC 1N6493/1N6500 20 1N6497/1N6503 5-30 635 (Red) 1N6494/1N6501 20 585 Yellow) 1 0.5 1N6498/1N6504 5-30 585 (Yellow) 0.5 0.25 1N6495/1N6502 25 570 (Green) 0.8 0.4 1N6499/1N6505 5-30 570 (Green) 0.4 0.2 PART NUMBER * JEDEC REGISTERED DATA RECOMMENDED OPERATING CONDITIONS: PARAMETER Forward Current, LED ONLY Forward Voltage, CURRENT LIMITED Operating Temperature SYMBOL IF MIN 20 MAX 35 UNITS mA VF 5 10 V TA -55 +100 °C SELECTION GUIDE PART NUMBER 62034-101 62034-102 62034-103 62034-111 62034-112 62034-113 62034-201 62034-202 62034-203 62034-211 62034-212 62034-213 62034-301 62034-302 62034-303 62034-311 62034-312 62034-313 62034-101A 62034-102A 62034-103A 62034-111A 62034-112A 62034-113A 62034-201A 62034-202A 62034-203A 62034-211A 62034-212A 62034-213A 62034-301A 62034-302A 62034-303A 62034-311A 62034-312A 62034-313A PART DESCRIPTION 1N6493, Red, LED only, 0.100 Pin Spacing, Commercial 1N6493, Red, LED only, 0.100 Pin Spacing, JAN Screened 1N6493, Red, LED only, 0.100 Pin Spacing, JANTX Screened 1N6497, Red, Current Regulated, 0.100 Pin Spacing, Commercial 1N6497, Red, Current Regulated, 0.100 Pin Spacing, JAN Screened 1N6497, Red, Current Regulated, 0.100 Pin Spacing, JANTX Screened 1N6494, Yellow, LED only, 0.100 Pin Spacing, Commercial 1N6494, Yellow, LED only, 0.100 Pin Spacing, JAN Screened 1N6494, Yellow, LED only, 0.100 Pin Spacing, JANTX Screened 1N6498, Yellow, Current Regulated, 0.100 Pin Spacing, Commercial 1N6498, Yellow, Current Regulated, 0.100 Pin Spacing, JAN Screened 1N6498, Yellow, Current Regulated, 0.100 Pin Spacing, JANTX Screened 1N6495, Green, LED only, 0.100 Pin Spacing, Commercial 1N6495, Green, LED only, 0.100 Pin Spacing, JAN Screened 1N6495, Green, LED only, 0.100 Pin Spacing, JANTX Screened 1N6499, Green, Current Regulated, 0.100 Pin Spacing, Commercial 1N6499, Green, Current Regulated, 0.100 Pin Spacing, JAN Screened 1N6499, Green, Current Regulated, 0.100 Pin Spacing, JANTX Screened 1N6500, Red, LED only, 0.300 Pin Spacing, Commercial 1N6500, Red, LED only, 0.300 Pin Spacing, JAN Screened 1N6500, Red, LED only, 0.300 Pin Spacing, JANTX Screened 1N6503, Red, Current Regulated, 0.300 Pin Spacing, Commercial 1N6503, Red, Current Regulated, 0.300 Pin Spacing, JAN Screened 1N6503, Red, Current Regulated, 0.300 Pin Spacing, JANTX Screened 1N6501, Yellow, LED only, 0.300 Pin Spacing, Commercial 1N6501, Yellow, LED only, 0.300 Pin Spacing, JAN Screened 1N6501, Yellow, LED only, 0.300 Pin Spacing, JANTX Screened 1N6504, Yellow, Current Regulated, 0.300 Pin Spacing, Commercial 1N6504, Yellow, Current Regulated, 0.300 Pin Spacing, JAN Screened 1N6504, Yellow, Current Regulated, 0.300 Pin Spacing, JANTX Screened 1N6502, Green, LED only, 0.300 Pin Spacing, Commercial 1N6502, Green, LED only, 0.300 Pin Spacing, JAN Screened 1N6502, Green, LED only, 0.300 Pin Spacing, JANTX Screened 1N6505, Green, Current Regulated, 0.300 Pin Spacing, Commercial 1N6505, Green, Current Regulated, 0.300 Pin Spacing, JAN Screened 1N6505, Green, Current Regulated, 0.300 Pin Spacing, JANTX Screened MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM