STROBE FLASH LIGHT SOURCES LIGHT SOURCE L10211/L10212 SERIES High-power strobe light sources with high stability OVERVIEW This flash light source, called "LF1", consists of a xenon flash lamp, power supply and control circuit, all integrated into one package. Selecting the desired optical system components such as the lightguide allows the LF1 to emit a variety of different types of light. Light emission is highly intense for a period of microseconds, making the LF1 ideal for strobe light sources. The LF1 is also easy to use and handle, offering features such as programmable light emission, flash count and control from a PC. Left: Rear panel light guide type L10211 series, Right: Front panel light guide type L10212 series (Light guide is sold separately) APPLICATIONS ●Light source for industry and lab use (factory automation, semiconductor inspection, image processing, fluorescence microscope, etc.) FEATURES ●Long service life: 1 × 108 flashes ●High stability: ±5 % (typical) ●Instantaneously high peak output (5 types of 16 flashing program) Normal mode: Constant emission frequency. Internal capacitor: 4 µF TLSXB0182EB Time 100 Program mode: Desired flash intervals. Light intensity 1000 times higher 10 Time 1 0.1 External control mode: Desired flash intervals and light output. 0 10 20 30 40 50 60 70 Light intensity RELATIVE OUTPUT Hamamatsu flash light source LF1 (40W) LED light source (40W) Light intensity 1000 ●Programmable light emission TIME (µs) ●External control Ease for synchronization with CCD camera ●Filter attachable ●Low noise and connectable to a PC Time TLSXC0055EB ●Easy lamp replacement Precise arc alignment with cassette ●CE marked With EMC directives and CISPR Class A LINEUP Type No. L10211-03-01 L10211-03-02 L10211-03-04 L10211-04-01 L10211-04-02 L10211-04-04 L10212-03-01 L10212-03-02 L10212-03-04 L10212-04-01 L10212-04-02 L10212-04-04 Lightguide Spectral distribution Internal capacitor connector (nm) (µF) 290 to 1600 (synthetic silica light guide B) Front panel A 385 to 1600 (glass light guide B) 290 to 1600 (synthetic silica light guide B) Rear panel A 385 to 1600 (glass light guide B) 1 2 4 1 2 4 1 2 4 1 2 4 NOTE: AAs viewed from the operation panel (front panel) BRecommended light guide (see the last page) Type No. (synthetic silica light guide): A10014-50-0110 Type No. (glass light guide): A10015-100-0110 SPECIFICATIONS Parameters Spectral distribution Flash duration (FWHM) Delay time Light output stability A (Typ.) Input voltage (AC) Power consumption (Max.) Lamp guaranteed life B Light emission control Lamp for maintenance Trigger socket for maintenance Operating ambient temperature Operating ambient humidity Storage temperature Storage humidity External control Applicable standards -03-01 -03-02 290 to 1600 L10211 / L10212 -03-04 -04-01 -04-02 385 to 1600 -04-04 Unit nm µs µs Max. % V W Flash — — — °C % °C % — — 2 to 4 20 ±5 100 to 240 150 1 × 108 Light emission by internal trigger or external trigger L10213-11 E10303-02 +5 to +35 10 to 80 (No condensation) -10 to +70 Below 80 (No condensation) RS-232C, D-SUB 25 Pin EN61326 : CLASS A NOTE: AMeasured with lamp supply voltage of 800 V, internal capacitor of 4 µF, and emission frequency of 30 Hz (at 40 W input). BFlash count at which the light output intensity is still more than 60 % of the initial light output intensity and also the incidence of misflash is 1/10000 or less. OPERATING CONDITIONS Parameters Internal capacitor Lamp supply voltage Repetition rate AC Maximum lamp input energy (per flash) BC Maximum lamp input power BC -03-01 -03-02 1 2 300 to 1000 1 to 70 1 to 40 0.5 1 L10211 / L10212 -03-04 -04-01 -04-02 4 1 2 300 to 800 300 to 1000 1 to 30 1 to 70 1 to 40 1.28 0.5 1 40 -04-04 4 300 to 800 1 to 30 1.28 Unit µF V Hz J W <Maximum lamp input energy (per flash)> E=1/2×C×V2 <Maximum lamp input power> W=E×f *Set the repetition rate so that the lamp input power is 40 W or less. E: maximum lamp input energy (J), C: internal capacitor (F), V: lamp supply voltage (V dc), f: repetition rate (Hz), W: Maximum lamp input power (W) Calculation example [Lamp supply voltage: 800 V, Internal capacitor: 4 µF, Repetition rate: 30 Hz] 1/2×4 µF×8002 V=1.28 J 1.28 J×30 Hz=38.4 W Maximum lamp input energy (per flash): 1.28 J Maximum lamp input power: 38.4 W NOTE: ASetting the repetition rate outside the conditions shown above may cause deterioration of the stability and a misflash. Please consult us if you need a higher repetition rate than shown above. BDo not set the value exceeding the maximum lamp input energy (per flash) and the maximum lamp input power. as it may cause deterioration and damage to the lamp. CLight emission by trigger. RADIANT SPECTRAL DISTRIBUTION TLSXB0169EA 100 -03 (When synthetic silica lightguide is used) -04 (When glass lightguide is used) 90 RELATIVE OUTPUT (%) 80 70 60 50 40 30 20 10 0 200 250 300 350 400 450 500 550 600 650 700 750 800 WAVELENGTH (nm) LIGHT OUTPUT INTENSITY Internal capacitor: 1 µF type 1000 V 900 V 800 V 700 V 600 V 500 V 400 V 300 V RADIANT INTENSITY (%) 90 80 70 60 50 30 20 10 0 1 2 3 4 5 6 7 8 9 10 4 µF – 800 V peak: 100 % TLSXB0187EA 800 V 700 V 600 V 500 V 400 V 300 V 90 RADIANT INTENSITY (%) 80 70 60 50 40 30 20 80 70 60 50 40 30 20 10 0 1 2 3 4 5 6 TIME (µs) 0 0 1 2 3 4 5 6 TIME (µs) Internal capacitor: 4 µF type 0 1000 V 900 V 800 V 700 V 600 V 500 V 400 V 300 V 10 TIME (µs) 100 4 µF – 800 V peak: 100 % TLSXB0186EA 90 40 0 100 RADIANT INTENSITY (%) 100 Internal capacitor: 2 µF type 4 µF – 800 V peak: 100 % TLSXB0185EA 7 8 9 10 7 8 9 10 DIMENSIONAL OUTLINES (Unit: mm) FILTER REPLACEMENT PORT L10211 series LAMP REPLACEMENT PORT COOLING FAN 9 300 LIGHT GUIDE CONNECTOR 14 230 120 MENU SELECT 6 UP DOWN TERMINAL FOR EMGCY SIGNAL 4-PIN TERMINAL BLOCK 160.8 ™ ON OFF ENT. EXTERNAL CONTROL TERMINAL D-SUB 25-PIN CONNECTOR COMMUNICATION CONNECTOR RS-232C OPERATION PANEL Weight: Approx. 6 kg TLSXA0124EA L10212 series FILTER REPLACEMENT PORT LIGHT GUIDE CONNECTOR 14 120 300 LAMP REPLACEMENT PORT 9 230 COOLING FAN MENU SELECT 6 UP DOWN TERMINAL FOR EMGCY SIGNAL 4-PIN TERMINAL BLOCK 160.8 ™ ON ENT. OFF COMMUNICATION CONNECTOR RS-232C OPERATION PANEL EXTERNAL CONTROL TERMINAL D-SUB 25-PIN CONNECTOR Weight: Approx. 6 kg TLSXA0119EB LIGHT GUIDES (Sold separately) Various light guides using a core material with high UV transmittance are available ranging from the single type up to a 6furcated type. Select the desired light guide that suits your application. We also welcome requests for custom light guides with different numbers of furcated ends, output end shapes and lengths. ●TYPE NO. GUIDE A10014–50–0110 A: Core material B: Output diameter C: Furcated D: Length A: Core material Type No. Core material Synthetic silica A10014 Glass A10015 ●DIMENSIONAL OUTLINE OF OUTPUT END a (Unit: mm) 10 33 e c d b a to e : see the right table. TLSXA0110EA B: Output diameter Suffix Output diameter 5 mm 50 7 mm 70 10 mm 100 C: Furcated Suffix 01 02 04 D: Length Suffix 10 15 30 Furcated Single 2 4 Length 1m 1.5 m 3m ●MAIN LIGHT GUIDE A A10014 A10014 A10014 A10014 A10015 A10015 Type No. B C 50 01 50 02 50 04 70 01 50 01 100 01 D 10 10 10 10 10 10 a b c d e 60 11 6.5 7 5 60 60 40 14 11 17 8.5 6.5 12 9 7 13 7 5 10 * PATENT PENDING: JAPAN 5 Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2014 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TLSZ1023E01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected] China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected] JUN. 2014 IP