KOA SPEER ELECTRONICS, INC. SS-220 R13 AHA 4/02/13 Multi Layer Ferrite Power Beads Type CZP CERTIFIED CERTIFIED 1. General ■ Designed to reduce noise at high frequencies ■ Standard EIA Packages: 1J, 2A, 2B ■ Nickel barrier with solder overcoat for excellent solderability ■ Magnetically shielded 2. Dimensions Table 1 Dimensions - inches (mm) W t W L Solder Plating Ni Plating Silver Metallization t d Terminations (Metallization Bands) Electrodes d Part L d 1J (0603) 0.063±0.006 (1.60±0.15) 0.031±0.006 (0.80±0.15) 0.031±0.006 (0.80±0.15) 0.014±0.006 (0.36±0.15) 2A (0805) 0.079±0.008 (2.00±0.20) 0.049±0.008 (1.25±0.20) 0.035±0.008 (0.90±0.20) 0.020±0.010 (0.51±0.25) 2B (1206) 0.126±0.008 (3.20±0.20) 0.063±0.008 (1.60±0.20) 0.043±0.008 (1.10±0.20) 0.020±0.010 (0.51±0.25) 3. Type Designation The type designation shall be in the following form: New Type CZP 2A F T TD 500 P Type Size Permability Code Termination Material Packaging Impedence Tolerance 1J 2A 2B F P T: Sn TD: 7" Paper Tape (1J, 2A: 4,000 pcs/reel) TE: 7" Embossed Plastic (2B: 3,000 pcs/reel) 2 significant figures + 1 multiplier P: ±25% PAGE 1 OF 10 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-220 R13 4. Standard Applications Part Designation Impedance @ 100MHz (Ω) CZP1JFTTD300P CZP1JFTTD600P CZP1JFTTD800P CZP1JFTTD121P CZP1JFTTD181P CZP1JFTTD221P CZP1JFTTD301P CZP1JFTTD601P CZP2AFTTD300P CZP2AFTTD500P CZP2AFTTD600P CZP2AFTTD800P CZP2AFTTD121P CZP2AFTTD151P CZP2AFTTD221P CZP2AFTTD301P CZP2AFTTD601P CZP2AFTTD102P CZP2BFTTE190P CZP2BFTTE300P CZP2BFTTE500P CZP2BFTTE800P CZP2BFTTE101P CZP2BFTTE121P CZP2BFTTE221P CZP2BFTTE301P CZP2BFTTE601P CZP2BFTTE102P CZP2BPTTE300P CZP2BPTTE600P CZP2BPTTE101P CZP2BPTTE121P CZP2BPTTE601P 30 60 80 120 180 220 300 600 30 50 60 80 120 150 220 300 600 1000 19 30 50 80 100 120 220 300 600 1000 30 60 100 120 600 DC Resistance Maximum (Ω) 0.03 Allowable DC Current Maximum (mA) Operating Temperature Range 3000 0.04 -55°C to +125°C 0.10 2000 0.20 0.015 1000 4000 0.04 3000 -55°C to +125°C 0.05 0.15 2000 0.20 1000 0.02 4000 0.025 0.03 3000 0.08 2500 0.10 0.15 2000 0.20 1000 0.015 0.02 0.03 0.04 0.10 -55°C to +125°C 6000 3000 1500 PAGE 2 OF 10 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-220 R13 5. 0603 (1J) Graphs CZP1JF300 CZP1JF600 CZP1JF121 1000 |Z|, XL, R (Ohm) 100 |Z| XL R 10 1 0.1 1 10 100 FREQUENCY (MHz) 1000 CZP1JF301 PAGE 3 OF 10 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-220 R13 5. 0805 (2A) Graphs CZP2AF300 CZP2AF800 CZP2AF221 CZP2AF301 CZP2AF601 PAGE 4 OF 10 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-220 R13 5. 1206 (2B) Graphs CZP2BF190 CZP2BF300 CZP2BF800 CZP2BF101 CZP2BF121 CZP2BF601 10000 |Z|, XL, R (Ohm) 1000 100 |Z| XL R 10 1 0.1 1 10 100 FREQUENCY (MHz) 1000 PAGE 5 OF 10 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-220 R13 5. 1206 (2B) Graphs (continued) CZP2BP101 CZP2BP601 CZP2BP121 PAGE 6 OF 10 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-220 R13 5. Characteristics Item Requirement Conditions Operating Temperature -55°C ~ +125°C Storage Temperature 40°C @ 70% Humidity Sealed plastic bags with desiccant shall be used to reduce the potential of oxidation on the terminations during storage. Resistance to Solder Heat Change in Impedance: Relative to value before test ±20%. Appearance: There shall be no cracking Solder Coverage: More than 75% of the terminal electrode shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Preheat: 150°C ±10°C Preheat Time: 60 sec Solder Temp: 260°C ±5°C Dip Time: 10 ±1 sec Solderability Solder Coverage: More than 95% of the termination shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Solder Temp: 245°C ±5°C Dip Time: 5 ±0.5 sec Leach Resistance Appearance: There shall be no visible signs of physical or mechanical damage (i.e. no cracks). Terminations: Termination must not be leached away for more than 5%. The bead shall be subjected to the following 5 steps for the period of time shown below. The 5 steps constitute one (1) rotation. 4 rotations shall be carried out. 1) Flux: 5-10 sec 2) After Flux: Air dry for 15 sec 3) Solder Temp: 230°C ±5°C 4) Dip Time: 5 ±0.5 sec 5) Cool: Air cool for 60 seconds Insulation Resistance Insulation Resistance: Min 1G ohms Solvent Resistance Change in Impedance: Relative to value before test ±10%. Terminal Strength (hanging test) Appearance: The terminal electrode shall not break off, nor shall there be damage to the body. Type 1J 2A 2B W(kgf) 0.5 1.0 1.5 Time 30 sec ±2 sec 30 sec ±2 sec 30 sec ±2 sec Terminal Strength (push test) Appearance: There shall be no evidence of mechanical degradations to terminals or body. Type 1J 2A 2B W(kgf) 1.4 1.8 2.3 Time 60 sec 60 sec 60 sec Bending Strength Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value before test ±10%. Cleaning by: Washer: Ultrasonic washer (100W) Solvent: Isopropyl alcohol Time: 3 minutes Board: 90x40x1.6mm Bend: 1mm Time: 5 sec PAGE 7 OF 10 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-220 R13 5. Characteristics (continued) Item Requirement Conditions Mechanical Shock Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value before test ±10%. Force: 50G Time: 11 msec There shall be 3 shocks in each of 6 directions (18 shocks total). Vibration Impedance: Relative to initial value ±10%. Only endurance conditioning by sweeping shall be made. The entire frequency range from 10-2,000Hz and return to 10Hz in 20 minutes (this shall constitute one cycle). Amplitude: 1.5mm The test shall have a 15G peak and shall be applied for a period of 4 hours (12 cycles) in each of 3 mutually perpendicular directions (a total of 36 cycles within a total of 12 hours). Thermal Shock Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value ±20%. DCR: The DCR shall not exceed initial specified value. Testing of the parts will be made at 0 hours, 250 hours and 500 hours. Before testing, the parts shall be allowed to cool to room temperature for 24 hours. Load Humidity Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value ±15%. Step 1-start 2-hold 3-transfer 4-hold 5-transfer Temperature -40°C ±2°C -40°C ±2°C — +105°C ±2°C — Time — 30 min ±5 min 0.5 min max. 30 min ±5 min 0.5 min max. Steps 1 thru 5 constitute one complete cycle and the test shall consist of a total of 500 cycles. Temperature: 85°C ±2°C Relative Humidity: 85% Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. Life Test Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value ±15% Temperature: 85°C ±2°C Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. PAGE 8 OF 10 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-220 R13 6. Packaging Specifications KOA’s multilayer components are provided on tape-and-reel for use in pick-and-place machines. The reel size is 7 inch. 7. Dimensions - inches (mm) A B W 1.75–0.1 1.5 +0.1 -0 T1 T1 T1 P1 Direction of feed 2.0 4.0–0.1 Dimensions - inches (mm) Tape A B W P1 T1 1J 0603 0.075±0.002 (1.9±0.1) 0.043±0.002 (1.1±0.1) 0.318±0.002 (8.1±0.1) 0.157±0.004 (4.0±0.1) 0.043±0.002 (1.1±0.1) 2A 0805 0.093±0.002 (2.4±0.1) 0.063±0.002 (1.6±0.1) 0.318±0.002 (8.1±0.1) 0.157±0.004 (4.0±0.1) 0.046±0.002 (1.2±0.1) 2B 1206 0.138±0.002 (3.5±0.1) 0.071±0.002 (1.8±0.1) 0.318±0.002 (8.1±0.1) 0.157±0.004 (4.0±0.1) 0.071±0.002 (1.8±0.1) Dimensions - inches (mm) (mm) Tape ¿a Central hole ¿d e ød e 7 (178) 0.827 (21) 0.079 (2.0) 1J 0603 2A 0805 ¿13 øa 2B 1206 PAGE 9 OF 10 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-220 R13 9. Recommended PC Board Land Patterns - mm (inches) Chip Size L G H 1J (0603) 2.6 (0.102) 0.6 (0.023) 0.8 (0.031) 2A (0805) 3.0 (0.118) 1.0 (0.039) 1.0 (0.039) 2B (1206) 4.4 (0.173) 2.2 (0.087) 1.4 (0.055) H G L 10. Recommended Temperature Profiles for Soldering Recommended Temperature Profile for Wave Soldering Preheat 100 Seconds Max. Soldering 10 Seconds Max. Recommended Temperature Profile for Reflow Soldering Natural Cooling Preheat 100 Seconds Max. 250°C Soldering 10 Seconds Max. Natural Cooling 250°C 200°C 150°C 150°C 60 Seconds Max. 20 Seconds Max. 60 Seconds Max. PAGE 10 OF 10 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.