KOA SPEER ELECTRONICS, INC. SS-219 R16 AHA 3/28/13 Multi Layer Ferrite Chip Beads Type CZB CERTIFIED CERTIFIED 1. General ■ ■ ■ ■ Designed to reduce noise at high frequencies Standard EIA Packages: 1E, 1J, 2A, 2B Nickel barrier with solder overcoat for excellent solderability Magnetically shielded ■ Products with lead-free terminations meet EU RoHS requirements 2. Dimensions Type W L t L Solder Plating Ni Plating 1E (0402) .039±.004 (1.0±0.1) .02±.004 (0.5±0.1) .02±.004 (0.5±0.1) .01±.004 (0.25±0.1) 1J (0603) .063±.006 (1.6±0.15) .031±.006 (0.8±0.15) .031±.006 (0.8±0.15) .014±.006 (0.36±0.15) Silver Metallization 2A (0805) .079±.008 (2.0±0.2) .049±.008 (1.25±0.2) .035±.008 (0.9±0.2) .020±.012 (0.51±0.30) 2B (1206) .126±.008 (3.2±0.2) .063±.008 (1.6±0.2) .043±.008 (1.1±0.2) .020±.012 (0.51±0.30) d Terminations (Metallization Bands) Dimensions inches (mm) W t (Inch Size Code) d Electrodes d 3. Type Designation The type designation shall be in the following form: CZB 1E G T TP 120 P Type Size Permability Code Termination Material Packaging Impedence Tolerance 1E 1J 2A 2B F G S T: Sn TP: 7" Paper Tape (1E only - 10,000 pcs/reel) TD: 7" Paper Tape (1J, 2A - 4,000 pcs/reel) TE: 7" Embossed Plastic (2B - 3,000 pcs/reel) 2 significant figures + 1 multiplier P: ±25% PAGE 1 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 4. Standard Applications † †† Part Designation Impedance @ 100MHz † (Ω) CZB1EGTTP100P CZB1EGTTP300P CZB1EGTTP600P CZB1EGTTP700P CZB1EGTTP800P CZB1EGTTP121P CZB1EGTTP221P CZB1EGTTP301P CZB1EGTTP451P CZB1EGTTP601P CZB1EGTTP102P CZB1ESTTP100P CZB1ESTTP300P CZB1ESTTP600P CZB1ESTTP800P CZB1ESTTP121P CZB1ESTTP221P CZB1ESTTP301P CZB1ESTTP601P CZB1JGTTD300P CZB1JGTTD600P CZB1JGTTD800P CZB1JGTTD101P CZB1JGTTD121P CZB1JGTTD141P CZB1JGTTD151P CZB1JGTTD181P CZB1JGTTD221P CZB1JGTTD301P CZB1JGTTD451P CZB1JGTTD601P CZB1JGTTD102P CZB1JGTTD152P CZB1JGTTD202P CZB1JSTTD100P CZB1JSTTD300P CZB1JSTTD600P CZB1JSTTD800P CZB1JSTTD101P CZB1JSTTD121P CZB1JSTTD221P CZB1JSTTD301P CZB1JSTTD601P CZB1JSTTD102P CZB2AFTTD110P CZB2AFTTD300P CZB2AFTTD500P CZB2AFTTD600P CZB2AFTTD800P CZB2AGTTD101P 10 30 60 70 80 120 220 300 450 600 1000 10 30 60 80 120 220 300 600 30 60 80 100 120 140 150 180 220 300 450 600 1000 1500 2000 10 30 60 80 100 120 220 300 600 1000 11 30 50 60 80 100 DC Resistance Maximum †† (Ω) 0.05 0.30 Allowable DC Current Maximum (mA) 600 500 0.40 350 0.50 0.70 0.80 0.90 1.00 1.50 300 0.20 400 Operating Temperature Range -55°C to +125°C 200 150 100 0.30 0.40 300 0.60 1.00 1.20 0.10 200 600 0.20 0.25 400 0.30 0.35 0.40 0.45 0.60 0.70 1.20 0.10 0.25 300 -55°C to +125°C 250 150 600 500 0.30 400 0.35 300 0.65 0.80 200 0.10 800 -55°C to +125°C 0.15 600 Impedance test method: HP4291A DCR test method: Keithley 580 PAGE 2 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 4. Standard Applications (continued) CZB2AGTTD121P CZB2AGTTD151P CZB2AGTTD201P CZB2AGTTD301P CZB2AGTTD601P CZB2AGTTD601PV CZB2AGTTD102P CZB2ASTTD110P CZB2ASTTD300P CZB2ASTTD600P CZB2ASTTD800P CZB2ASTTD121P CZB2ASTTD221P CZB2ASTTD301P CZB2ASTTD601P CZB2BFTTE190P CZB2BFTTE300P CZB2BFTTE500P CZB2BFTTE600P CZB2BFTTE800P CZB2BFTTE101P CZB2BFTTE121P CZB2BFTTE151P CZB2BFTTE201P CZB2BFTTE221P CZB2BFTTE301P CZB2BFTTE501P CZB2BFTTE601P CZB2BGTTE202P CZB2BSTTE601P † †† DC Resistance Maximum †† (Ω) Impedance @ 100MHz † (Ω) Part Designation 120 150 200 300 600 600 1000 11 30 60 80 120 220 300 600 19 30 50 60 80 100 120 150 200 220 300 500 600 2000 @ 50MHz 600 0.25 Allowable DC Current Maximum (mA) 600 500 0.30 400 0.25 0.40 0.10 500 300 800 0.20 600 0.25 0.30 0.35 0.40 0.05 500 Operating Temperature Range -55°C to +125°C 400 300 800 0.10 0.20 0.15 0.20 0.15 600 -55°C to +125°C 0.20 500 0.30 0.20 0.40 0.70 0.35 400 300 300 Impedance test method: HP4291A DCR test method: Keithley 580 PAGE 3 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 5. 0402 Graphs CZB1EGTE100 CZB1EG700 CZB1EG121 CZB1EG301 CZB1EG221 800 CZB1EG451 10000 10 00 Z 1000 400 200 10 0 |Z| XL R 100 X R 10 10 0 IMPEDANCE (Ω) |Z| XL R |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 600 1 1 10 100 1000 1 10 FREQUENCY (MHz) 100 1000 1 1 FREQUENCY (MHz) 10 100 10 00 FREQUENCY (MHz) CZB1EGTE102 CZB1EG601 814-362-5536 ax: 814-362-9726 PAGE 4 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 5. 0402 Graphs (continued) PAGE 5 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 5. 0603 Graphs (continued) CZB1JG300 CZB1JG600 CZB1JG800 CZB1JG101 CZB1JG121 CZB1JG141 CZB1JG151 CZB1JG181 CZB1JG221 CZB1JG451 CZB1JG301 CZB1JG601 1000 IMPEDANCE (Ω) Z 100 R 10 1 1 10 100 1000 FREQUENCY (MHz) PAGE 6 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 5. 0603 Graphs (continued) CZB1JG102 CZB1J3S300 CZB1JS600 1000 1000 100 |Z| XL R 10 1 IMPEDANCE (Ω) |Z|, XL, R (Ohm) CZB1JG202 CZB1JG152 100 Z 10 1 1 10 100 10 1 1000 100 1000 FREQUENCY (MHz) FREQUENCY (MHz) CZB1JS121 CZB1JS221 1000 IMPEDANCE (Ω) Z 100 10 1 1 100 1000 CZB1JS102 CZB1JS601 CZB1JS301 10 FREQUENCY (MHz) 10000 |Z|, XL, R (Ohm) 1000 |Z| XL R 100 10 1 1 10 100 1000 FREQUENCY (MHz) PAGE 7 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. ax: 814-362-9726 KOA SPEER ELECTRONICS, INC. SS-219 R16 5. 0805 Graphs CZB2AFTE110P CZB2AF300 CZB2AF500 CZB2AF600 CZB2AF800 CZB2AG101 CZB2AG121 CZB2AG151 CZB2AG201 CZB2AG601 CZB2AG102 CZB2AG301 PAGE 8 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 5. 0805 Graphs (continued) CZB2AS600 CZB2AS 300 1000 10 0 100 |Z|, XL, R (Ohm) IMPEDANCE (Ω) Z 10 |Z| XL R 10 1 0.1 1 1 1 10 100 1000 10 100 1000 FREQUENCY (MHz) FREQUENCY (MHz) CZB2AS221 CZB2AS121 1000 Z IMPEDANCE (Ω) 100 10 1 1 10 100 1000 FREQUENCY (MHz) CZB2AS601 CZB2AS301 1000 Z IMPEDANCE (Ω) 100 10 1 1 10 100 1000 FREQUENCY (MHz) PAGE 9 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 5. 1206 Graphs CZB2BF190 CZB2BF300 CZ2 B F B 500 CZB2BF600 CZB2F B 800 CZB2BF101 CZB2BF121 CZB2BF201 CZB2BF151 |Z|, XL, R (Ohm) 1000 100 |Z| XL R 10 1 1 10 100 1000 FREQUENCY (MHz) CZB2BF301 PAGE 10 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 5. 1206 Graphs (continued) CZ2 B F B 601 PAGE 11 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 5. Characteristics Item Requirement Operating Temperature -55°C ~ +125°C Storage Temperature 40°C @ 70% Humidity Sealed plastic bags with desiccant shall be used to reduce the potential of oxidation on the terminations during storage. Resistance to Solder Heat Change in Impedance: Relative to value before test ±20%. Appearance: There shall be no cracking Solder Coverage: More than 75% of the terminal electrode shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Preheat: 150°C ±10°C Preheat Time: 60 sec Solder Temp: 260°C ±5°C Dip Time: 10 ±1 sec Solderability Solder Coverage: More than 95% of the termination shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Solder Temp: 245°C ±5°C Dip Time: 5 ±0.5 sec Leach Resistance Appearance: There shall be no visible signs of physical or mechanical damage (i.e. no cracks) Terminations: Termination must not be leached away for more than 5%. The bead shall be subjected to the following 5 steps for the period of time shown below. The 5 steps constitute one (1) rotation. 4 rotations shall be carried out. 1) Flux: 5-10 sec 2) After Flux: Air dry for 15 sec 3) Solder Temp: 230°C ±5°C 4) Dip Time: 5 ±0.5 sec 5) Cool: Air cool for 60 seconds Insulation Resistance Insulation Resistance: Min 1G ohms Solvent Resistance Change in Impedance: Relative to value before test ±10%. Terminal Strength (hanging test) Appearance: The terminal electrode shall not break off, nor shall there be damage to the body. Terminal Strength (push test) Conditions Cleaning by: Washer: Ultrasonic washer (100W) Solvent: Isopropyl alcohol Time: 3 minutes Appearance: There shall be no evidence of mechanical degradations to terminals or body. Type 1E 1J 2A 2B W(kgf) Type 1E 1J 2A 2B W(kgf) Time N/A 30 sec ±2 sec 30 sec ±2 sec 30 sec ±2 sec 0.5 1.0 1.5 Time N/A 60 sec 60 sec 60 sec 1.4 1.8 2.3 PAGE 12 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 5. Characteristics (continued) Item Requirement Conditions Bending Strength Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value before test ±10% Board: 90x40x1.6mm Bend: 1mm Time: 5 sec Mechanical Shock Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value before test ±10% Force: 50G Time: 11 msec There shall be 3 shocks in each of 6 directions (18 shocks total). Vibration Impedance: Relative to initial value ±10% Only endurance conditioning by sweeping shall be made. The entire frequency range from 10-2,000Hz and return to 10Hz in 20 minutes (this shall constitute one cycle). Amplitude: 1.5mm The test shall have a 15G peak and shall be applied for a period of 4 hours (12 cycles) in each of 3 mutually perpendicular directions (a total of 36 cycles within a total of 12 hours). Thermal Shock Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value ±20%. DCR: The DCR shall not exceed initial specified value. Testing of the parts will be made at 0 hours, 250 hours and 500 hours. Before testing the parts shall be allowed to cool to room temperature for 24 hours. Load Humidity Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value ±15% Step 1-start 2-hold 3-transfer 4-hold 5-transfer Temperature -40°C ±2°C -40°C ±2°C — +105°C ±2°C — Time — 30 min ±5 min 0.5 min max. 30 min ±5 min 0.5 min max. Steps 1 thru 5 constitute one complete cycle and the test shall consist of a total of 500 cycles. Temperature: 85°C ±2°C Relative Humidity: 85% Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. Life Test Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value ±15% Temperature: 85°C ±2°C Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. PAGE 13 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 6. Dimensions - inches (mm) 1.5 +0.1 -0 A B W 1.75±0.1 Carrier Tape P1 (TP) 2.0 4.0±0.1 P1 T1 T1 T1 Direction of feed (Notes) Dotted lines are applicable to only “TP” and “TB.” Component Size (mm) Type CZB 1E 1J 2A 2B L W T 1.0±0.1 1.6±0.15 2.0±0.2 3.2±0.2 0.5±0.1 0.8±0.15 1.25±0.2 1.6±0.2 0.5±0.1 0.8±0.15 0.9±0.2 0.51±0.25 Carrier Tape TP TD TD TE Taping (mm) Quantity/ Reel (Pieces) A B W P1 T1 Reel Size 10000 4000 2000/4000* 3000 1.17±0.1 1.8±0.1 2.4±0.1 3.5±0.1 0.65±0.1 1.1±0.1 1.6±0.1 1.8±0.1 8.0±0.22 8.1±0.1 8.1±0.1 8.1±0.1 2.0±0.23 4.0±0.1 4.0±0.1 4.0±0.1 0.63±0.1 1.1±0.1 1.2±0.1 1.8±0.1 178 178 178 178 * CZB2A: <2200Ω=TD:4,000; 2200Ω=TD: 2,000 pcs/reel Dimensions - inches (mm) (mm) Tape Central hole ¿d ¿a e ød e 7 (178) 0.827 (21) 0.079 (2.0) 1E 0402 1J 0603 ¿13 øa 2A 0805 2B 1206 PAGE 14 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-219 R16 7. Recommended PC Board Land Patterns - mm (inches) Chip Size L G H 1E (0402) 1.6 (0.063) 0.4 (0.016) 0.6 (0.024) 1J (0603) 2.6 (0.102) 0.55 (0.022) 0.94 (0.037) 2A (0805) 3.0 (0.118) 0.66 (0.026) 1.45 (0.057) G 2B (1206) 4.4 (0.173) 1.5 (0.059) 1.8 (0.071) L H 8. Recommended Temperature Profiles for Soldering Recommended Temperature Profile for Wave Soldering Preheat 100 Seconds Max. Soldering 10 Seconds Max. Recommended Temperature Profile for Reflow Soldering Natural Cooling Preheat 100 Seconds Max. 250°C Soldering 10 Seconds Max. Natural Cooling 250°C 200°C 150°C 150°C 20 Seconds Max. 60 Seconds Max. 60 Seconds Max. PAGE 15 OF 15 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.