NV73DL multilayer type metal oxide varistor (automotive) EU features d W L Type d 1J (0603) t 2B (1206) Ni Plating Inner Side Electrode Varistor Element Inner Electrode ordering information New Part # DL NV73 2A Energy Code Type Part Designation NV73DL1JTTE12 NV73DL1JTTE22 NV73DL1JTTE27 NV73DL1JTTE33 NV73DL1JTTE47 NV73DL2ATTE12 NV73DL2ATTE22 NV73DL2ATTE27 NV73DL2ATTE33 NV73DL2ATTE47 NV73DL2ATTE68 NV73DL2ATTE82 Varistor Voltage (V) Maximum Allowable Voltage .039 max. (1.0 max.) .016±.006 (0.4±0.15) .079±.010 (2.0±0.25) .049±.008 (1.25±0.2) .051 max. (1.30 max.) .020±.010 (0.5±0.25) .126±.012 (3.2±0.3) .063±.012 (1.6±0.3) .057 max. (1.45 max.) .022±.012 (0.55±0.3) Termination Material T: Sn 1J: 1.6 x 0.15 2A: 2.0 x 1.2 2B: 3.2 x 1.6 d .031±.006 (0.8±0.15) TE T Size applications and ratings .063±.006 (1.6±0.15) 2A (0805) Sn Plating Dimensions inches (mm) W t L (Inch Size Code) Maximum Clamping Voltage (V) 27 Packaging TE: Embossed plastic Varistor Voltage Maximum Energy (J) Maximum Peak Current 8/20µs (A) 1 time Short-Time Applied Voltage (5 min) (VDC) V1mA A.C.(Vr.m.s.) D.C.(V) V1A V2A 10~14.4 22~27 24~32 33~39 40~54 10~14.4 6.1 14 17 20 30 6.1 8.6 16 22 26 34 8.6 24 42 50 60 81 24 –– –– –– –– –– –– 0.1 0.2 0.2 0.3 0.3 0.1 80 100 100 100 100 120 10 24.5 24.5 24.5 42 10 22~27 24~32 33~39 40~54 62~72 74~90 14 17 20 30 45 50 16 22 26 34 56 65 42 50 60 81 108 135 –– –– –– –– –– –– 0.3 0.3 0.3 0.3 0.3 0.3 160 160 160 160 160 160 24.5 24.5 24.5 42 64 75 For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/05/11 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 281 circuit protection dimensions and construction • SMD type metal oxide varistors • Ideal for countermeasures against ESD (Conforming to IEC61000-4-2) • High maximum energy type • Low leakage current • High resistance to cyclic temperature stress • Marking: Black body color • Suitable for both flow and reflow soldering • Products with lead-free terminations meet EU RoHS requirements. Pb located in glass material, electrode and varistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC • AEC-Q200 Qualified NV73DL multilayer type metal oxide varistor (automotive) applications and ratings (continued) Varistor Voltage (V) Part Designation Maximum Clamping Voltage (V) Maximum Allowable Voltage V1mA A.C.(Vr.m.s.) 22~27 NV73DL2BTTE22 14 NV73DL2BTTE27 24~32 17 NV73DL2BTTE33 33~39 20 NV73DL2BTTE68 62~72 45 NV73DL2BTTE82 74~90 50 Operating temperature range: -40°C to +125°C Storage temperature range: -40°C to +150°C D.C.(V) V1A 16 22 26 56 65 V2A Maximum Energy (J) Maximum Peak Current 8/20µs (A) 1 time Short-Time Applied Voltage (5 min) (VDC) 1 1 1 1.5 1.5 300 300 300 300 300 24.5 24.5 24.5 64 75 42 50 60 108 135 –– –– –– –– –– environmental applications Voltage Current Curves (Ta = +25°C) 1000 NV73DL1J 1000 Leakage Current NV73DL2A Clamping Voltage 1000 Clamping Voltage Leakage Current NV73DL1JTTE47 NV73DL1JTTE33 NV73DL1JTTE27 NV73DL1JTTE22 NV73DL1JTTE12 NV73DL2ATTE82 NV73DL2ATTE68 NV73DL2ATTE47 NV73DL2ATTE33 NV73DL2ATTE27 NV73DL2ATTE22 NV73DL2ATTE12 100 1 10−6 10−4 10−3 10−2 10−1 100 101 102 103 Performance Characteristics 10−6 10−5 10−4 10−3 10−2 Current (A) circuit protection Parameter Varistor Voltage Solderability Resistance to Solder Heat Rapid Change of Temperature 100 10 1 10−5 NV73DL2BTTE82 NV73DL2BTTE68 NV73DL2BTTE33 NV73DL2BTTE27 NV73DL2BTTE22 Voltage (V) 10 10 Clamping Voltage Leakage Current Voltage (V) Voltage (V) 100 NV73DL2B 10−1 100 101 102 103 1 10−6 10−5 10−4 10−3 Current (A) Requirement ∆ V1mA±% Within specified tolerance 95% coverage minimum (Ag-Pd: 75% coverage min.) ±10% ±10% 10−2 10−1 100 101 102 103 Current (A) Test Method Voltage between terminals when 1mA and 10mA are flowed 230°C ± 5°C, 5 seconds ± 0.5 second 260°C ± 5°C, 10 seconds ± 0.5 second -40°C (30 minutes)/ +125°C (30 minutes), 1000 cycles Short-Time Applied Voltage ±10% Maximum value of D.C. voltage that can be applied for a short period of time (5 min.) (NV73D2A 12: 1 min.) Maximum Peak Current ±10% A single standard impulse current of 8/20µ seconds is applied Maximum Energy ±10% A single standard impulse of 2m second, once Electrostatic Discharge ±10% 25kV (Non contact) (NV73DL1J12, NV73DL2A12: 15kV (Non contact)) No visible damage. No remarkable mechanical damage Vibration frequency: 10Hz~2000Hz; Full amplitude: 1.5mm, 10Hz~2000Hz~10Hz 20 min. XYZ direction 4 hrs for each total 12 hrs Vibration Resistance High Temperature Life with d.c. Bias ±10% 125°C ± 2°C, 1000h, Applied voltage: Varistor voltage (V1ma) x 0.85 High Temperature & High Humidity Life with Bias Thermal Shock ±10% 85°C ± 2°C, 85% RH, 1000h, Applied voltage: Varistor voltage (V1ma) x 0.85 ±10% -55°C (15 min.)/ +125°C (15 min.) 300 cycles Shock High Temperature Storage Low Temperature Storage ±10% ±10% ±10% Half sine wave, Applied time: 1m second, Applied cycle: 500m/s2, 5 cycles 150°C, 1000h -40°C, 1000h Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 282 11/23/14 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com