resistors HPC/PCF ceramic fixed power type leaded resistor EU features • PCF series: Coated with UL94V0 flameproof material • Suitable for automatic machine insertion • Able to replace carbon composition resistors in most applications • Marking: HFC size: Reddish brown body color with alpha-numeric marking, PCF size: Light green body color with color-coded bands • Products with lead-free terminations meet EU RoHS requirements • Higher reliability against disconnection compared to wirewound resistors and film resistors • AEC-Q200 Qualified: HPC only dimensions and construction Inner Resistive Electrode Marking Body Electrode Cap Coating Type HPC1/2 HPC1 ød HPC 10K Lead Wire 3mm Max. L ℓ PCF D ℓ HPC5 Inner Electrode Resistive Body PCF1/2 PCF1 d L ℓ PCF Type HPC PCF PCF2 Lead Electrode Wire Cap 1/2 Power Rating 1/2: 0.5W 1: 1W 2: 2W 3: 3W 4: 4W 5: 5W .433±.039 (11.0±2.0) Dimensions inches (mm) C (max.) D d (nom.) __ .138±.039 (3.5±1.0) 0.630±.039 (16.0±2.0) __ .177±.039 (4.5±1.0) .827±.039 (21.0±2.0) __ .197±.039 (5.0±1.0) 1.02±.039 (26.0±2.0) __ .236±.039 (6.0±1.0) 1.50±.039 (38.0±2.0) __ .276±.039 (7.0±1.0) 1.73±.039 (44.0±2.0) __ .295±.039 (7.5±1.0) .354±.039 (9.0±1.0) .437 (11.1) .138±.02 (3.5±0.5) 0.65±.039 (16.5±1.0) .748 (19.0) .217±.039 (5.5±1.0) .748±.039 (19.0±1.0) .886 (22.5) .276±.039 (7.0±1.0) l .031 (0.8) 1.50±.118 (38.0±3.0) .039 (1.0) .028 (0.7) 1.18±.118 (30.0±3.0) .031 (0.8) 1.50±.118 (38.0±3.0) D ℓ ordering information Part # HPC3 HPC4 C Coating Marking HPC2 L C Termination Material C: SnCu T631 R Taping Packaging 1/2: T52 1: T631 A: Ammo R: Reel 102 Nominal Resistance 2 significant figures + 1 multiplier K Tolerance K: ±10% M: ±20% For further information on packaging, please refer to Appendix C. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 138 12/24/13 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com ceramic fixed power type leaded resistor applications and ratings Part Designation HPC1/2 Power Rating @ 70°C HPC1 0.5W HPC4 Resistance Minimum Range Dielectric Resistance T.C.R. Withstanding E-12 (±10%) Tolerance (ppm/°C) E-6 (±20%) Voltage –– HPC2 1.0W –– 2.0W –– 3.0W –– HPC5 4.0W –– 5.0W –– PCF1 0.5W HPC3 PCF1/2 1.0W PCF2 2.0W 10Ω - 390KΩ (+10%) 3.3Ω - 330KΩ (+20%) 500V 700V K: ±10% M: ±20% 4.7Ω - 100KΩ 3.3Ω - 390KΩ Absolute Absolute Absolute Maximum Maximum Maximum Working Overload Pulse Voltage Voltage Voltage* -900±300: R<100Ω -1200±300: R≥100Ω -900±300: R<100Ω -1300+300: R≥100Ω 200V 400V 8kV 300V 600V 15kV 400V 800V 25kV 450V 900V 25kV 500V 1000V 25kV 550V 1100V 25kV 200V 400V 10kV 300V 600V 14kV 400V 800V 20kV Rated Ambient Temp. Operating Temp. Range +40°C -40°C to +200°C * Resistance to pulse: change shall be ±5% of the pre-test values. 1 sec. ON, 1 second OFF, 10,000 cycles. The voltage is applied with maximum pulse voltage. environmental applications Derating Curve PCF 80 80 For resistors operated at an ambient temperature of 70°C or above, a power rating shall be derated in accordance with the derating curve. 60 40 20 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 200 70 Ambient Temperature (°C) % Rated Power 100 % Rated Power 100 HPC 20 0 -60 -40 -20 Performance Characteristics Parameter Resistance T.C.R Voltage Coefficient (Apply for over 1kΩ) Overload Resistance to pulse Requirement ∆ R ±(% + 0.05Ω) Limit Typical Within regulated to tolerance — HPC: -900±300x10-6/K: R<100Ω -1200±300x10-6/K:R≥100Ω — PCF: -900±300:R<100Ω -1300±300:R>100Ω 0~-0.2%/V (HPC1/2, PCF) — 0~-0.1%/V (HPC1) 0~-0.05%/V (HPC2,3,4,5) 2% 0.4% 5% — For resistors operated at an ambient temperature of 40°C or above, a power rating shall be derated in accordance with the derating curve. 60 40 0 60 80 100 120 140 160 180 200 40 Ambient Temperature (°C) 20 Test Method Resistance 3.3Ω~8.2Ω 10Ω~82Ω 100Ω~390kΩ Measurement voltage 0.3V 1.0V 3.0V 25°C HPC: +25°C/-40°C and +25°C/+125°C PCF: +25°C/-40°C, +25°C/+75°C and +25°C/+125°C Rated voltage and rated voltage x 10% Rated voltage x 2.5 or maximum overload voltage for 5s, whichever less The resistor mounted to the test circuit as below. 1 sec. ON and 1 sec. OFF. 10,000 cycles. The voltage is applied with maximum pulse voltage. 1 sec ON Protection resistor SW 1 sec OFF DC (Max. pulse voltage) C=1.000pF Rx (HPC: In insulation oil) Resistance to soldering heat 2% 0.8% 350°C±10°C, 3.5s±0.5s Rapid change of temperature 2% 0.4% -40°C(30min.)/+85°C(30min.), 5 cycles Moisture resistance 5% 0.6% 40°C±2°C, 90%~95%RH, 1000 hours, 1.5h ON/0, 5h OFF cycles Load life 5% 0.4% HPC: 40°C±2°C, 1000h, 1.5h ON/0, 5h OFF cycles PCF: 70°C±3°C, 1000h, 1.5h ON/0, 5h OFF cycles Resistance to Solvent No abnormality in appearance. Marking shall be easily legible. — Dipping in IPA or Xylene for 3 minutes and leaving for 10 minutes after removing drops, then brushing 10 times. High Temperature Exposure HPC only: 5% HPC only: 1.7% HPC only: +200°C, 1000 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/20/14 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 139 resistors HPC/PCF