KOA PCF4CT52A102K

resistors
HPC/PCF
ceramic fixed power type leaded resistor
EU
features
• PCF series: Coated with UL94V0 flameproof material
• Suitable for automatic machine insertion
• Able to replace carbon composition resistors
in most applications
• Marking: HFC size: Reddish brown body color with
alpha-numeric marking, PCF size: Light green
body color with color-coded bands
• Products with lead-free terminations
meet EU RoHS requirements
• Higher reliability against disconnection compared
to wirewound resistors and film resistors
• AEC-Q200 Qualified: HPC only
dimensions and construction
Inner
Resistive Electrode
Marking Body
Electrode
Cap
Coating
10K
Lead
Wire
3mm Max.
L
ℓ
PCF
L
HPC1/2
.433±.039
(11.0±2.0)
__
.138±.039
(3.5±1.0)
HPC1
0.630±.039
(16.0±2.0)
__
.177±.039
(4.5±1.0)
HPC2
.827±.039
(21.0±2.0)
__
.197±.039
(5.0±1.0)
HPC3
1.02±.039
(26.0±2.0)
__
.236±.039
(6.0±1.0)
HPC4
1.50±.039
(38.0±2.0)
__
.276±.039
(7.0±1.0)
HPC5
1.73±.039
(44.0±2.0)
__
.295±.039
(7.5±1.0)
PCF1/2
.354±.039
(9.0±1.0)
.437
(11.1)
.138±.02
(3.5±0.5)
PCF1
0.65±.039
(16.5±1.0)
.748
(19.0)
.217±.039
(5.5±1.0)
PCF2
.748±.039
(19.0±1.0)
.886
(22.5)
.276±.039
(7.0±1.0)
D
ℓ
C
d
Inner
Electrode
Resistive Body
Coating Marking
L
ℓ
Lead
Electrode Wire
Cap
Dimensions inches (mm)
C (max.)
D
d (nom.)
Type
ød
HPC
l
.031
(0.8)
1.50±.118
(38.0±3.0)
.039
(1.0)
.028
(0.7)
1.18±.118
(30.0±3.0)
.031
(0.8)
1.50±.118
(38.0±3.0)
D
ℓ
ordering information
Part #
PCF
Type
HPC
PCF
1/2
C
Power
Rating
1/2: 0.5W
1: 1W
2: 2W
3: 3W
4: 4W
5: 5W
Termination
Material
C: SnCu
T631
R
Taping
Packaging
1/2: T52
1: T631
A: Ammo
R: Reel
102
Nominal
Resistance
2 significant
figures + 1
multiplier
3 significant
figures + 1
multiplier
K
Tolerance
K: ±10%
M: ±20%
For further information on packaging,
please refer to Appendix C.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
122
12/18/12
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
ceramic fixed power type leaded resistor
applications and ratings
Part
Designation
Power
Rating
@ 70°C
HPC1/2
0.5W
Resistance
Minimum
Range
Dielectric
Withstanding E-12 (±10%)
E-6 (±20%)
Voltage
T.C.R.
(ppm/°C)
Resistance
Tolerance
Absolute
Maximum
Working
Voltage
Absolute
Maximum
Overload
Voltage
Absolute
Maximum
Pulse
Voltage*
200V
400V
8kV
––
HPC1
1.0W
––
HPC2
2.0W
––
HPC3
3.0W
––
HPC4
4.0W
––
HPC5
5.0W
––
PCF1/2
0.5W
PCF1
1.0W
PCF2
2.0W
10Ω - 390KΩ
(+10%)
3.3Ω - 330KΩ
(+20%)
500V
700V
K: ±10%
M: ±20%
4.7Ω - 100KΩ
3.3Ω - 390KΩ
-900±300:
R<100Ω
-1200±300:
R≥100Ω
-900±300:
R<100Ω
-1300+300:
R≥100Ω
300V
600V
15kV
400V
800V
25kV
450V
900V
25kV
500V
1000V
25kV
550V
1100V
25kV
200V
400V
10kV
300V
600V
14kV
400V
800V
20kV
Operating
Temperature
Range
-40°C
to
+200°C
* Resistance to pulse: change shall be ±5% of the pre-test values. 1 sec. ON, 1 second OFF, 10,000 cycles. The voltage is applied with maximum pulse voltage.
environmental applications
Derating Curve
PCF
HPC
100
100
80
For resistors operated at an
ambient temperature of 70°C
or above, a power rating shall be
derated in accordance with the
above derating curve.
60
40
20
0
-60 -40 -20
0
20 40 60 80 100 120 140 160 180 200
70
Ambient Temperature
(°C)
% Rated Power
% Rated Power
80
For resistors operated at an
ambient temperature of 40°C
or above, a power rating shall be
derated in accordance with the
above derating curve.
60
40
20
0
-60 -40 -20
0
60 80 100 120 140 160 180 200
40
Ambient Temperature
(°C)
20
Performance Characteristics
Parameter
Resistance
T.C.R
Voltage Coefficient
(Apply for over 1kΩ)
Overload
Resistance to pulse
Requirement ∆ R ±(% + 0.05Ω)
Limit
Typical
Within regulated
to tolerance
—
HPC: -900±300x10-6/K:
R<100Ω
-1200±300x10-6/K:R≥100Ω —
PCF: -900±300:R<100Ω
-1300±300:R>100Ω
0~-0.2%/V (HPC1/2, PCF)
—
0~-0.1%/V (HPC1)
0~-0.05%/V (HPC2,3,4,5)
2%
0.4%
5%
—
Test Method
Resistance
3.3Ω~8.2Ω
10Ω~82Ω
100Ω~390kΩ
Measurement voltage
0.3V
1.0V
3.0V
25°C
HPC: +25°C/-40°C and +25°C/+125°C
PCF: +25°C/-40°C, +25°C/+75°C and +25°C/+125°C
Rated voltage and rated voltage x 10%
Rated voltage x 2.5 or maximum overload voltage for 5s, whichever less
The resistor mounted to the test circuit as below.
1 sec. ON and 1 sec. OFF. 10,000 cycles.
The voltage is applied with maximum
pulse voltage.
1 sec ON
Protection
resistor
SW 1 sec OFF
DC
(Max. pulse
voltage)
C=1.000pF
Rx
(HPC: In
insulation oil)
Resistance to soldering heat
2%
0.8%
350°C±10°C, 3.5s±0.5s
Rapid change of temperature
2%
0.4%
-40°C(30min.)/+85°C(30min.), 5 cycles
Moisture resistance
5%
0.6%
40°C±2°C, 90%~95%RH, 1000h, 1.5h ON/0, 5h OFF cycles
Load life
5%
0.4%
HPC: 40°C±2°C, 1000h, 1.5h ON/0, 5h OFF cycles
PCF: 70°C±3°C, 1000h, 1.5h ON/0, 5h OFF cycles
Resistance to Solvent
No abnormality in
appearance. Marking
shall be easily legible.
—
Dipping in IPA or Xylene for 3 minutes and leaving for 10 minutes after removing drops,
then brushing 10 times.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
1/05/13
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
123
resistors
HPC/PCF