SCOCXOHS family package DIL 14 Sine Wave Output 10 to 120MHz Low phase noise DIMENSIONS Package: Pin out Pin 1 = Voltage control Pin 7 = GND Pin 8 = Fout Pin 14 = Vdd 6.35 0.8 7.8 20.20 0.46 15.24 7 14 8 7.62 1 12.52 5.35 10.7 All dimensions in mm typical RoHScompliant: Oven control quartz crystal oscillator Fundamental mode frequency High shock and vibration resistance Wide temperature range Low aging Customer specification on request Very fast warm up Low power consumption Swiss made quality DESCRIPTION: This DIL 14 package has been specially designed for the applications: - Digital switching - Telecom transmission - Sonet / SDH / DWDM / FDM/36 / WIMAX - Airbone equipments - Battery operated systems -Instrumentation - Radio Transceiver The OCXO are supplied on trays (50 pcs/tray). ELECTRICAL CHARACTERISTICS AT 25°C Frequency versus temperature A: 0 to +60°C B: -20 to +70°C C: -40 to +85°C Frequency long term aging 1) long term aging 10 years long term aging 1st year ΔF/F ΔF/F 10Hz 100Hz 1 kHz 10 kHz 100kHz <±4 ≤±1 ppm Tau <1 E-10 Vdd Idd Phase noise typical Static conditions BW = 1Hz < ± 2.5 ≤ ± 0.3 ms ppb V s ppm Supply voltage Input current Output signal sine wave Start-up time Frequency stability versus load ± 5% Short term stability 0.1 to 30s 5E-11 typ at 1s >40MHz t ΔF/F Vdd t ΔF/F Vc Stability versus Vdd ≤40MHz ≤40MHz >40MHz ≥ ± 2.5 ≥±4 3.3 / 5 see table 2 see table 4 <5 ≤ ± 10 3.3 5 ≤ 120 ≤ 60 < ± 0.1 Frequency control range see table 3 Warm-up within ± 0.1 ppm at 25°C see table 1 (without air flow) 10MHz 100MHz -110 -140 -155 -160 -160 -90 -120 -140 -150 -155 1) <± 1 E-9 / day after 30 days operating 10MHz <± 3 E-9 / day after 30 days operating 100MHz ppm V dBc/ Hz TABLE 1: Vdd = 3.3V Operating Temperature range Version standard Version high stability 0 to +60°C ≤ ± 75 ppb ≤ ± 50 ppb B = -20 to +70°C ≤ ± 150 ppb ≤ ± 75 ppb C = -40 to +85°C ≤ ± 250 ppb ≤ ± 100 ppb A = TABLE 1: Vdd = 5V Operating Temperature range TABLE 3: VC Vdd = 5V ± 0.2V Version standard Version high stability 0 to +60°C ≤ ± 50 ppb ≤ ± 25 ppb B = -20 to +70°C ≤ ± 100 ppb ≤ ± 50 ppb C = -40 to +85°C ≤ ± 150 ppb ≤ ± 100 ppb A = TABLE 2: Idd Vdd = 3.3V ± 0.15V Temperature Vdd = 3.3V Vdd = 5V +25°C -20°C ≤ 120 mA ≤ 170 mA ≤ 80 mA ≤ 120 mA start-up current at 25°C ≤ 300mA duration 30s 10s Frequency control adjustment response slope positive Vdd = 3.3V Vdd = 5V Voltage control input impedance > 47kΩ 0 to 3.3V 0.5 to 5V Resistor control R connect pin 1 to ground (Input impedance > -4,7kΩ) 0 to 10kΩ 0 to 10kΩ No frequency control YA or YB Pin 1 connect to GND TABLE 4: OUTPUT SIGNAL Vdd 3.3V 5V Load 50Ω 50Ω Level ≤20MHz ≥ 2dBm ≥ 4dBm Level >20MHz ≥ -6dBm ≥ -4dBm Harmonics (typ) -15dBc -15dBc Spurious -70dBc -70dBc Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 80 90 [email protected] www.microcrystal.com STANDARD FREQUENCIES: Frequency «MHz» 10 20 40 50 54 100 108 120 Other frequencies from 10 MHz up to 120 MHz on request ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -55 to +125°C Vibration resistance 10 to 2000Hz / 20g Shocks resistance 5000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: PRODUCT DESCRIPTION AND ORDERING INFORMATION: pins soldering +235°C / 10s max +260°C / 5s max Package SMD version option D1 or D2 see application notes Dil 14.4 pins GND to case height = 8mm SCOCXOHS V W V T - C V5 20MHz XXX = Vdd 3.3V = Vdd 5V T = high stability blank = standard stability A B C X customer spec N° = 0 to +60°C = -20 to +70°C = -40 to +85°C = custom R1 = R = 0 to 10kΩ V3 = Vc = 0 to 3.3V V5 = Vc = 0.5 to 5V YA internal accuracy= ± 1ppm YB internal accuracy= ± 0.5ppm Y = custom Frequency A unique part number will be generated for each product specification, i.e: 20xxxx-EA00(in ESD plastic tray) Please contact us. All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 80 90 [email protected] www.microcrystal.com Version 15/02.2015