SCOCXO family package DIL 14 HC-MOS output Up

SCOCXO family package DIL 14
HC-MOS output Up to 54 MHz Tight stability
DIMENSIONS
Package:
Pin out
Pin 1 = Voltage control
Pin 7 = GND
Pin 8 = Fout
Pin 14 = Vdd
6.35
0.8
7.8
20.20
0.46
15.24
7
14
8
7.62
1
12.52
5.35
10.7
All dimensions in mm typical
RoHScompliant:
Oven control quartz crystal oscillator
Fundamental mode frequency
High shock and vibration resistance
Wide temperature range
Low aging
Customer specification on request
Very fast warm up
Low power consumption
Swiss made quality
DESCRIPTION:
This DIL 14 package has been specially designed for the applications:
- Digital switching
- Telecom transmission
- Sonet / SDH / DWDM / FDM/36 / WIMAX
- Airbone equipments
- Battery operated systems
-Instrumentation
- Radio Transceiver
The OCXO are supplied on trays (50 pcs/tray).
ELECTRICAL
CHARACTERISTICS 25°C
Frequency versus temperature
A: 0 to +60°C
B: -20 to +70°C
C: -40 to +85°C
E: -55 to +85°C
Frequency long term aging
1)
long term aging 10 years
long term aging 1st year
Frequency control range
Supply voltage
Input current
Output signal
Symmetry at Vdd/2
Rise & fall time (without load)
Level "0" & "1"
Start-up time
Load min / max
Frequency stability versus load ± 10%
Warm-up within ± 0.1 ppm at 25°C
Stability versus Vdd
ΔF/F
see table 1
(without air flow)
ΔF/F
< ± 2.5
≤ ± 0.3
Vc
≥ ± 2.5 (see table 3)
Vdd
3.3 / 5 / 12
Idd
see table 2
HC-MOS compatible
40 / 60
≤7
<0.4V> Vcc-0.5
t
<5
3/47
ΔF/F
≤ ± 10
Vdd
3.3
5
12
t
≤ 120 ≤ 60
≤ 30
ΔF/F
< ± 0.1
ppm
Tau
E-10
Short term stability 0.1 to 30s
5E-11 typ at 1s
Phase noise typical at 10 MHz
Static conditions
BW = 1Hz 10Hz
100Hz
1 kHz
10 kHz
1) <± 1 E-9 / day after 30 days operating
<1
3.3 / f5V
12V
-100
-130
-140
-145
-90
-120
-130
-135
ppm
V
%
nS
V
ms
pF
ppb
V
s
ppm
dBc/
Hz
Table 1: Vdd = 3.3V
Operating
Temperature range
Version
standard
Version
high stability
0 to +60°C
≤ ± 75 ppb
≤ ± 50 ppb
B = -20 to +70°C
≤ ± 150 ppb
≤ ± 75 ppb
C = -40 to +85°C
≤ ± 250 ppb
≤ ± 100 ppb
A =
Table 1: Vdd = 5V
Operating
Temperature range
Version
high stability
0 to +60°C
≤ ± 50 ppb
≤ ± 25 ppb
B = -20 to +70°C
≤ ± 100 ppb
≤ ± 50 ppb
C = -40 to +85°C
≤ ± 150 ppb
≤ ± 100 ppb
E = -55 to +85°C
≤ ± 400 ppb
≤ ± 200 ppb
Operating
Temperature range
A =
Table 2: Idd
Table 3:
Vdd = 5V ± 0.2V
Version
standard
A =
Table 1: Vdd = 12V
Vdd = 3.3V ± 0.15V
Vdd = 12V ± 0.5V
Version
standard
Version
high stability
0 to +60°C
< ± 50 ppb
≤ ± 25 ppb
B = -20 to +70°C
≤ ± 100 ppb
≤ ± 50 ppb
C = -40 to +85°C
≤ ± 150 ppb
≤ ± 100 ppb
E = -55 to +85°C
≤ ± 400 ppb
≤ ± 200 ppb
Temperature
Vdd = 3.3V
Vdd = 5V
Vdd = 12V
25°C
-20°C
≤ 120 mA
≤ 170 mA
≤ 80 mA
≤ 120 mA
≤ 50 mA
≤ 80 mA
start-up current at 25°C
≤ 250mA duration
30s
10s
10s
Frequency control
adjustment
response slope positive
Vdd = 3.3V
Vdd = 5V
Vdd = 12V
Voltage control input
impedance > 47kΩ
0 to 3.3V
0.5 to 5V
0.5 to 5V
Resistor control
R connect pin 1 to ground
(Input impedance > -4,7kΩ)
0 to 10kΩ
0 to 10kΩ
0 to 10kΩ
No frequency control
YA or YB
Micro Crystal AG
Mühlestrasse 14
CH-2540 Grenchen
Switzerland
Pin 1 connect to GND
Tel. +41 32 655 82 82
Fax +41 32 655 80 90
[email protected]
www.microcrystal.com
STANDARD FREQUENCIES:
Frequency «MHz»
10
12
12.8
40
52
54
14.7456
16
20
26
Other frequencies from 10 kHz up to 54 MHz on request
ENVIRONMENTAL
Storage temp. range
-55 to +125°C
Vibration resistance
10 to 2000Hz / 20g
Shocks resistance
5000g / 0.3ms / ½ sine
Pin soldering
+235°C / 10s max
+260°C / 5s max
Package
SMD version option D1 or D2
see application note
Dil 14.4 pins GND to case
height = 8mm
CHARACTERISTICS:
TERMINATIONS AND
PROCESSING:
PRODUCT DESCRIPTION AND
ORDERING INFORMATION:
SCOCXO
W
V
blank
V T - C
V5 20MHz
XXX
= Vdd 3.3V
= Vdd 5V
= Vdd 12V
T = high stability
blank = standard stability
A
B
C
E
X
customer
spec N°
= 0 to +60°C
= -20 to +70°C
= -40 to +85°C
= -55 to +85°C
= custom
R1 = R = 0 to 10kΩ
V3 = Vc = 0 to 3.3V
V5 = Vc = 0.5 to 5V
YA internal accuracy= ± 1ppm
YB internal accuracy= ± 0.5ppm
Y = custom
Frequency
A unique part number will be generated for each product specification, i.e:
20xxxx-EA00(in ESD plastic tray)
Please contact us.
All specifications subject to change without notice.
Micro Crystal AG
Mühlestrasse 14
CH-2540 Grenchen
Switzerland
Tel. +41 32 655 82 82
Fax +41 32 655 80 90
[email protected]
www.microcrystal.com
Version 15/02.2015