PLA140

PLA140
Single-Pole Normally Open
OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
Rating
400
250
8
Units
VP
mArms / mADC

Features
Description
The PLA140 is a single-pole normally open
(1-Form-A) Solid State Relay that uses optically
coupled MOSFET technology to provide 3750Vrms of
input-to-output isolation.
MOSFET output switches, which use IXYS
Integrated Circuits Division's patented OptoMOS
architecture, are controlled by a highly efficient
GaAIAs infrared LED.
• Low On-Resistance, High Current Handling
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• 3750Vrms Input/Output Isolation
• High Reliability
• VDE Compatible
• FCC Compatible
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Small 6-Pin Package
• Surface Mount Tape & Reel Version Available
The PLA140’s combination of low on-resistance and
high load current handling makes it suitable for a
variety of industrial applications.
Because Solid State Relays like the PLA140 have no
moving parts, they offer faster, bounce-free switching
in a more compact surface mount or though hole
package than traditional electromechanical relays.
Applications
• Telecommunications
• Telecomm Switching
• Hook Switch
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
• Automotive
Approvals
• UL Certified Component: File E76270
• CSA Certified Component: Certificate 1175739
• Certified to EN60950
TUV Certificate B 09 07 49410 004
Ordering Information
Part Number
PLA140
PLA140S
PLA140STR
Switching Characteristics of
Normally Open Devices
Pin Configuration
AC/DC Configuration
1
+ Control
– Control
Do Not Use
6
2
5
3
4
Form-A
Load
Do Not Use
IF
Load
90%
DC Only Configuration
+ Control
– Control
Do Not Use
Pb
DS-PLA140-R08
Description
6-Pin DIP (50/Tube)
6-Pin Surface Mount (50/Tube)
6-Pin Surface Mount (1,000/Reel)
1
6
2
5
3
4
+ Load
10%
ILOAD
– Load
ton
toff
e3
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
PLA140
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Derate linearly 1.33 mW / ºC
2
Derate linearly 6.67 mW / ºC
Ratings
400
5
50
1
150
800
3750
-40 to +85
-40 to +125
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current (Continuous)
AC/DC Configuration
DC Configuration
Peak Load Current
On-Resistance
AC/DC Configuration
DC Configuration
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Input to Output Capacitance
2
Conditions
Symbol
Min
Typ
Max
Units
IF=5mA
IL
-
-
250
350
±500
mArms / mADC
mADC
mAP
IF=5mA , t=10ms
ILPK
5.5
1.5
-
8
3
1

ILEAK
-
IF=0mA , VL=50V, f=1MHz
ton
toff
COUT
-
0.4
0.19
18
3
1
-
IL=250mA
IF=5mA
VR=5V
IF
IF
VF
IR
0.2
0.9
-
0.46
0.44
1.2
-
5
1.4
10
mA
mA
V
µA
-
CI/O
-
3
-
pF
IF=5mA , IL=250mA
IF=5mA , IL=350mA
VL=400VP
IF=5mA, VL=10V
RON
www.ixysic.com
µA
ms
pF
R08
INTEGRATED CIRCUITS DIVISION
PLA140
PERFORMANCE DATA*
30
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
Typical IF for Switch Operation
(IL=250mA)
20
Typical On-Resistance Distribution
(N=50, IF=5mA, IL=250mA)
20
20
15
10
Device Count (N)
Device Count (N)
Device Count (N)
25
15
10
5
15
10
5
5
1.235 1.240 1.245 1.250 1.255 1.260 1.265
LED Forward Voltage (V)
0.28 0.34 0.40 0.46 0.52 0.58 0.64 0.70
LED Current (mA)
Typical Turn-On Time
(N=50, IF=5mA, IL=100mA)
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mA)
25
15
10
20
15
10
0
0
0.675 0.750 0.825 0.900 0.975 1.050 1.125 1.200
Turn-On Time (ms)
0.13 0.15 0.17 0.19 0.21 0.23 0.25 0.27
Turn-Off Time (ms)
Typical LED Forward Voltage Drop
vs. Temperature
Typical Turn-On Time
vs. LED Forward Current
(IL=100mA)
1.6
1.6
1.4
1.3
1.1
-40
0.60
0.6
0.4
0
20
40
60
Temperature (ºC)
80
100
0
Typical IF for Switch Operation
vs. Temperature
(IL=100mA)
1.4
10
20
30
LED Current (mA)
40
5
448
454 460 466 472 478
Blocking Voltage (VP)
484
Typical Turn-Off Time
vs. LED Forward Current
(IL=100mA)
0.24
0.22
0.20
0.18
0
50
Typical Turn-On Time vs. Temperature
(IF=5mA, IL=100mA)
0.26
1.3
Turn-On Time (ms)
0.56
0.54
0.52
0.50
0.48
0.46
1.2
1.1
1.0
0.9
0.8
0.7
0
20
40
60
Temperature (ºC)
80
100
0.5
-40
10
20
30
LED Current (mA)
40
50
Typical Turn-Off Time vs. Temperature
(IF=5mA, IL=100mA)
0.24
0.22
0.20
0.18
0.16
0.6
-20
10
0.16
0.0
-20
5.4
0.2
0.58
0.44
-40
0.8
Turn-Off Time (ms)
1.2
IF=50mA
IF=20mA
IF=10mA
IF=5mA
1.0
5.3
15
0.26
1.2
4.9 5.0 5.1 5.2
On-Resistance (:)
Typical Blocking Voltage Distribution
(N=50, IF=0mA)
442
Turn-Off Time (ms)
1.5
4.8
0
1.4
Turn-On Time (ms)
LED Forward Voltage (V)
20
5
5
4.7
Device Count (N)
20
Device Count (N)
Device Count (N)
25
LED Current (mA)
0
0
0
-20
0
20
40
60
Temperature (ºC)
80
100
0.14
-40
-20
0
20
40
60
Temperature (ºC)
80
100
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
R08
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
PLA140
PERFORMANCE DATA*
0.3
8
0.2
7
6
5
4
3
-40
-20
0
20
40
60
Temperature (ºC)
80
0.1
0.0
-0.1
225
200
175
150
125
-0.3
-1.5
100
100
-1.0
-0.5
0.0
0.5
Load Voltage (V)
1.0
-40
1.5
0.35
350
0.30
325
1.6
1.4
0.20
0.15
0.10
1.2
0.05
1.0
-40
0.00
-20
0
20
40
60
Temperature (ºC)
80
Load Current (mA)
1.8
500
70
Leakage Current (nA)
80
480
470
460
450
440
-40
-20
0
20
40
60
Temperature (ºC)
80
100
80
100
300
275
250
225
200
150
510
490
20
40
60
Temperature (ºC)
175
0.0
100
0
375
0.1
0.2
0.3
0.4
Load Voltage (V)
0.5
-40
0.6
Typical Leakage vs. Temperature
Measured Across Pins 4&6
(VL=400V)
-20
0
20
40
60
Temperature (ºC)
80
100
10s
100s
Energy Rating Curve
1.2
Load Current (A)
Load Current (A)
0.40
2.2
0.25
-20
Maximum Load Current
vs. Temperature - DC-Only Configuration
(IF=5mA)
Typical Load Current vs. Load Voltage
DC-Only Configuration
(IF=5mA)
2.4
2.0
Maximum Load Current
vs. Temperature - AC/DC Configuration
(IF=5mA)
250
Typical Blocking Voltage
vs. Temperature
Blocking Voltage (VP)
275
-0.2
Typical On-Resistance vs. Temperature
DC-Only Configuration
(IF=5mA, IL=100mA)
On-Resistance (:)
Typical Load Current vs. Load Voltage
AC/DC Configuration
(IF=5mA)
Load Current (mA)
9
Load Current (A)
On-Resistance (:)
Typical On-Resistance vs. Temperature
AC/DC Configuration
(IF=5mA, IL=100mA)
60
50
40
30
20
1.0
0.8
0.6
0.4
10
0
-40
-20
0
20
40
60
Temperature (ºC)
80
100
0.2
10Ps 100Ps 1ms 10ms 100ms
Time
1s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
4
www.ixysic.com
R08
INTEGRATED CIRCUITS DIVISION
PLA140
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
PLA140 / PLA140S
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
PLA140 / PLA140S
250ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
R08
e3
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
PLA140
MECHANICAL DIMENSIONS
PLA140
8.382 ± 0.381
(0.330 ± 0.015)
PCB Hole Pattern
7.239 TYP
(0.285 TYP)
2.54 ± 0.127
(0.100 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
Pin 1
7.620 ± 0.254
(0.300 ± 0.010)
1.651 ± 0.254
(0.065 ± 0.010)
3.302 ± 0.051
(0.130 ± 0.002)
0.254 ± 0.0127
(0.010 ± 0.0005)
6.350 ± 0.127
(0.250 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
4.064 TYP
(0.160 TYP)
Dimensions
mm
(inches)
0.457 ± 0.076
(0.018 ± 0.003)
PLA140S
8.382 ± 0.381
(0.330 ± 0.015)
9.524 ± 0.508
(0.375 ± 0.020)
Pin 1
0.635 ± 0.127
(0.025 ± 0.005)
PCB Land Pattern
2.54 ± 0.127
(0.100 ± 0.005)
2.54
(0.10)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.651 ± 0.254
(0.065 ± 0.010)
7.620 ± 0.254
(0.300 ± 0.010)
0.254 ± 0.0127
(0.010 ± 0.0005)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
3.302 ± 0.051
(0.130 ± 0.002)
4.445 ± 0.254
(0.175 ± 0.010)
Dimensions
mm
(inches)
1.651 ± 0.254
(0.065 ± 0.010)
6
www.ixysic.com
R08
INTEGRATED CIRCUITS DIVISION
PLA140
PLA140STR Tape & Reel
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=16.00
(0.63)
B0 = 10.10
(0.398)
K0 = 4.90
(0.19)
K1 = 3.80
(0.15)
P = 12.00
(0.472)
User Direction of Feed
Embossed
Carrier
Embossment
A0 = 10.10
(0.398)
Dimensions
mm
(inches)
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
7
Specification: DS-PLA140-R08
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/22/2012