M-949-11 Line Sense Relay INTEGRATED CIRCUITS DIVISION Features • Meets UL and British Standard specifications • Designed for use with FCC Part 68 certified equipment • Temperature ranges from -25º to 70ºC • Senses telephone line current from 15 to 200 mA • Includes a 1-Form-A relay contact • Achieves excellent longitudinal balance • Meets high-voltage isolation requirements up to 4,000 volts • Filters common-mode noise through dual coils Applications • Telephone Exchange Products • PBX and Key Systems • Station Message Detail Reporting (SMDR) Systems Description The M-949-11 Line Sense Relay is a small, PCB-mounted loop current detector with the safety and reliability features required for UL and British Standard (BSI) regulated telephone applications. The M-949-11 is designed for both North American and international use, and offers superior protection against voltage surges such as lightning strikes. When connected to the voice pair (tip and ring) of an ordinary telephone line, the M-949-11 provides a 1-Form-A relay closure in response to current flowing through the wires. This closure can be used with control circuitry for on-hook/off-hook monitoring, switch hook flash detection, and rotary dial pulse counting. The M-949-11 is ideally suited for use with the Teltone M-959 Dial Pulse Counter and other loop-current applications, including microprocessor-based designs. Figure 1. Electrical Configuration Ordering Information Part # M-949-11 Description Loop Current Sensing Relay Figure 2. Typical Application: Dialed Digit Monitor DS-M-949-11-R04 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION M-949-11 Electrical Characteristics Parameter Conditions Min Max Units Notes 15 8.1 63 - 5 200 9.9 1.5 6 2500 0.5 0.1 mA mA mA mH mH dB pF ms ms 1 1 2 3 3 4 5 - Dual Coils Pick-Up Current -25ºC to 70ºC Ambient Drop-Out Current Continuous Coil Current 20ºC Ambient Coil Resistance - Each Coil Coil Inductance - Each Coil Coil Inductance - Both Coils in Series Longitudinal Balance Coil to Coil Capacitance (at 1kHz) Excitation to Closure Time (Including Bounce) Excitation Removal to Open Time Relay Contact Voltage Rating Current Rating Power (Resistive) Rating Rated Life - - 90 500 10 106 108 VDC mA W operations operations 6 7 8 Open Contacts Coil to Coil Coil to Contact - 100 250 4000 - VDC VDC VDC - 85% 95% -25 -40 70 85 ºC ºC 9 9 Dielectric Strength Ambient Temperature Operating Non-Operating (Storage) 1 2 3 4 5 6 7 8 9 2 With coils in series-aiding configuration. With the current continuously applied. At 1kHz. With current of 15-200mA at 1kHz. With current of 15mA and coils in series-aiding configuration. Maximum initial contact resistance < 1 10º at 10W (resistive). 10º at 5W (resistive). Relative humidity. www.ixysic.com R04 INTEGRATED CIRCUITS DIVISION M-949-11 Mechanical Dimensions 0.75 dia. (0.030 dia.) 20.6 - 20.8 (0.811 - 0.819) Teltone M-949-11 PWB Pattern Top View 14 7.62 typ. (0.30 typ.) 10 9 10.7 - 10.9 (0.421 - 0.429) 2 3 Pin 1 Indicator 7 2.54 typ. (0.10 typ.) 0.2 - 0.4 (0.008 - 0.016) 3.3 - 3.5 (0.130 - 0.138) 10.5 - 10.7 (0.413 - 0.421) Dimensions mm (inch) 0.4 - 0.6 dia. (0.016 - 0.024 dia.) For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 3 Specification: DS-M-949-11-R04 ©Copyright 2014, IXYS Integrated Circuits Division All rights reserved. Printed in USA. 6/12/2014