SPECIFICATIONS 1/9 1. Scope of Application These specifications are applied to the chip type LED lamp , model CL-L230-HC10L-A 2. Part code C L - L 2 3 0 - H C 10 L - A Series L230 : White power LED for general lighting. Special specifications H : High General Color Rendering Index Type. Watt Class C10 : 10 watt pakage. Lighting color L : White color rank L Approved Checked Drawn K.Fukasawa K.Funakubo S.Imai Mar.03.'08 Mar.03.'08 Mar.03.'08 - Mar.03.'08 New implementation Mark Date Description Appro. Symbol CITILIGHT Name CL-L230-HC10L-A Drawing No AA7E-102-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P296 03/08 SPECIFICATIONS 2/9 3. Outline drawing Tolerances unless otherwise specified : ±0.3mm Unit : mm 23 Cathode 3.2 2.25 6.8 R1.6 1.6 5.65 17.5 5.5 Cathode Mark Anode 0.8 1.4 O11.5 O14.0 Tc Measurement Point 4. Performance ( 1 ) Absolute Maximum Rating Parameter Symbol Power Dissipation Pd Forward Current IF Rating Value 14.1 1.05 Unit W A Forward Pulse Current IFP 1.5 A Reverse Voltage VR 15 V Operating Temperature TOP -30 ～ +85 °C Storage Temperature TST -40 ～ +100 °C Junction Temperature Tj Max 120 °C *1 *2 *1Forward Current : Duty≦1/10 , Pulse Width≦10msec *2 D.C. Current : Tj = Tc + Rj-c x Pd Pulse Current : Tj = Tc + Rj-c x Pw(Power Dissipation / one-Pulse) x duty Approved Checked Drawn K.Fukasawa K.Funakubo S.Imai Mar.03.'08 Mar.03.'08 Mar.03.'08 - Mar.03.'08 New implementation Mark Date Description Appro. Symbol CITILIGHT Name CL-L230-HC10L-A Drawing No AA7E-202-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P296 03/08 SPECIFICATIONS ( 2 ) Electro-optical Characteristics Parameter Forward Voltage Reverse Current Thermal resistance Luminous Flux High General Color Rendering Index Rj-c ΦV Junction-case IF=900mA Min 10.5 412 Ra IF=900mA 85 Symbol Condition IF=900mA VF VR=15V IR 3/9 Typ 11.8 3.5 500 Max 12.9 100 - 90 - Chromaticity coordinates ( Condition : IF=900mA ,Tc=25°C Color Rank x y Color Rank 0.433 0.421 0.445 0.448 LR1 LR2 0.469 0.456 0.456 0.429 0.433 0.421 Color Rank x y Color Rank 0.417 0.386 0.433 0.421 LR3 LR4 0.456 0.429 0.437 0.392 0.417 0.386 ( Tc=25°C ) Unit V μA °C /W lm - ) x 0.456 0.469 0.499 0.481 0.456 x 0.437 0.456 0.481 0.459 0.437 y 0.429 0.456 0.466 0.435 0.429 y 0.392 0.429 0.435 0.398 0.392 0.48 0.47 0.46 0.45 LR2 0.44 LR1 y 0.43 0.42 0.41 LR4 LR3 0.40 0.39 0.38 0.37 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.50 0.51 x Note 1) The tolerance of measurement at our tester is VF±3% , fv±10% , Chromaticity(x,y)±0.01. Note 2) For handling ,please apply CMOS LSI or equivalent any electrostatic effect. Approved Checked Drawn K.Fukasawa K.Funakubo S.Imai Mar.03.'08 Mar.03.'08 Mar.03.'08 - Mar.03.'08 New implementation Mark Date Description Appro. Symbol CITILIGHT Name CL-L230-HC10L-A Drawing No AA7E-302-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P296 03/08 SPECIFICATIONS 4/9 5. Characteristics Forward Current vs. Relative Luminous Flux Forward Current vs. Forward Voltage If - Vf Characteristics Tc=25°C 120% 14.0 100% 12.0 80% 10.0 VF (V) φv (a.u) If - φv Characteristics Tc=25°C 60% 40% 6.0 4.0 20% 2.0 0% 0.0 0 200 400 600 If (mA） 800 1000 1200 Forward Current vs. Chromaticity Coordinate 0 0.020 0.015 0.015 0.010 0.010 0.005 0.005 ⊿x -0.010 ⊿y -0.015 400 600 If (mA） 800 1000 1200 Tc - Chromaticity Characteristics If=900mA If - Chromaticity Characteristics Tc=25°C 0.020 0.000 -0.005 200 Case Temperature vs. Chromaticity Coordinate -0.020 ⊿x,⊿y ⊿x,⊿y 8.0 0.000 -0.005 ⊿x -0.010 ⊿y -0.015 -0.020 0 200 400 600 If(mA） 800 1000 1200 0 Approved Checked 20 Drawn S.Imai K.Fukasawa K.Funakubo Mar.03.'08 Mar.03.'08 Mar.03.'08 - Mar.03.'08 New implementation Mark Date Description Appro. 40 60 Tc(°C） 80 100 Symbol CITILIGHT Name CL-L230-HC10L-A Drawing No AA7E-402-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P296 03/08 SPECIFICATIONS Case Temperature vs. Forward Voltage 5/9 Case Temperature vs. Relative Luminous Flux Tc－Φv Characteristics If=900mA 110% 100% 100% 90% 90% Φv(a.u) Vf(a.u) Tc－Vf Characteristics If=900mA 110% 80% 70% 60% 80% 70% 60% 50% 50% 0 20 40 Tc(°C) 60 80 0 100 Case Temperature vs. Allowable Forward Current 20 Relative luminous output IF(mA) 800 600 400 200 0 50 75 Tc(°C) 100 125 100% New implementation Mark Date Description Appro. 100 IF=900mA 80% 60% 40% 20% 0% 350 450 Drawn K.Fukasawa K.Funakubo S.Imai Mar.03.'08 Mar.03.'08 Mar.03.'08 Mar.03.'08 80 120% Approved Checked - 60 Spectrum 1000 25 Tc(°C) Forward Current vs. Forward Voltage Tc-IF Characteristics 1200 0 40 550 650 Wavelength (nm) 750 850 Symbol CITILIGHT Name CL-L230-HC10L-A Drawing No AA7E-502-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P296 03/08 SPECIFICATIONS 6/9 6. Reliability (1)Details of the tests Test Item Room Temperature Operating Life Test High Temperature Operating Life Test Low Temperature Storage Test High Temperature Storage Test Moisture proof Test Thermal Shock Test Test Condition Ta=25°C ,IF=900mA(Tj=90℃)×1000 hours (with Al-fin) Ta=50°C ,IF=900mA(Tj=110℃)×1000 hours (with Al-fin) -30°C × 1000 hours 100°C × 1000 hours 60±2°C , 90±5%RH for 1000 hours -30°C ×30minutes - 100°C × 30minutes, 100 cycle (2)Judgement Criteria of Failure for Reliability Test (Ta=25°C) Measuring Item Symbol Measuring Condition Judgement Criteria for Failure Forward Voltage VF IF=900mA >U×1.1 Total Luminous Flux ΦV IF=900mA <S×0.7 U defines the upper limit of the specified characteristics.S defines the initial value. Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be returned to the normal ambient conditions after the completion of each test. Approved Checked Drawn K.Fukasawa K.Funakubo S.Imai Mar.03.'08 Mar.03.'08 Mar.03.'08 - Mar.03.'08 New implementation Mark Date Description Appro. Symbol CITILIGHT Name CL-L230-HC10L-A Drawing No AA7E-602-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P296 03/08 SPECIFICATIONS 7/9 7. Packing Specifications (1) Primary packing An empty tray is placed on top of a five-tier tray which contain 40 pieces each. The set of six trays is banded together by wrapping two rubber bands around it and then sealed in a plastic bag. (Smallest packing unit: 200 pieces) An indication label which specifies product name, quantity, lot number and shipment date is attached to the outside of the plastic bag. Tray (Dimensions: 310 × 200 × 14.6mm / Materials: Electrically conductive PS) (2) Second packing A set of six trays is placed in a box of up to five sets. (Dimensions of box: 315mm 215mm 213mm, maximum of 400 pieces per box) The same indication label used for the primary packing is attached to the box. If needed, a card board box is also used for shipment. < Packing figure > Cathode A 310 A Example of indication label 210 CUSTOMER TYPE CL-L230-HC10L-A P.NO Lot No XXXXXX Q'ty pcs PASS CITIZEN ELECTRONICS plastic bag indication label indication box Approved Checked Drawn K.Fukasawa K.Funakubo S.Imai Mar.03.'08 Mar.03.'08 Mar.03.'08 - Mar.03.'08 New implementation Mark Date Description Appro. Symbol CITILIGHT Name CL-L230-HC10L-A Drawing No AA7E-702-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P296 03/08 SPECIFICATIONS 8/9 Precautions 1. Avoid the application of any stress to the Resin. 2. Avoid any contact by a sharp metal nail or other materials with the Resin portion. Resin portion (Shaded area) 11.0m m 3. This product should be secured firmly by fastening an M3 screw on both sides of the product. Please be careful not to apply any stress to the product during the clamping operation. As the connection status could vary depending on materials of outer heat sink, please check thoroughly. Recommended installation screw pitch 19.5m M3 screw Spring washer (=＜Φ6mm) Plane washer (=＜Φ6mm) Thermal conductive silicone grease Outer heat sink 4. A heat radiating grease should be applied to the whole rear surface so that this product can dissipate heat as a whole. This product could be bent during the clamping operation if heat grease in sheet form is used. For this reason, it is recommended that grease in paste form is used. 5. Handling of static electricity - Please take measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. - As for damages due to static electricity, please check them by lighting inspection. CE's lighting inspection criterion Condition Judgemental criterion IF=1mA or less No-lighting should not exist. 6. Please be aware that this product should not come into contact with any other parts in assembled status. Approved Checked Drawn K.Fukasawa K.Funakubo S.Imai Mar.03.'08 Mar.03.'08 Mar.03.'08 - Mar.03.'08 New implementation Mark Date Description Appro. Symbol CITILIGHT Name CL-L230-HC10L-A Drawing No AA7E-802-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P296 03/08 SPECIFICATIONS 9/9 Precautions (continued) 7.Drive circuit - A constant current circuit is recommended as a drive circuit. And when two or more LED packages are connected, the series connection between each package is recommended. - Please design a circuit that prevents any reverse voltage (excess current) from being applied to this product instantaneously when the circuit is ON or OFF. 8. Heat generation - As this product is designed with consideration of the heat release property of module, a heat release design is required to use this product efficiently. Please ensure that heat generation is not in excess of the absolute maximum rating. (Refer to 4-1 Performance) - Factors responsible for an increase in temperature include heat generation attributed to ambient temperature conditions or power dissipation. Thus, drive conditions should be taken into consideration, depending on ambient temperature (Ta). 9. Recommended soldering - Soldering operation should be performed within 3.5 seconds per land using a soldering iron of 40W or lower. The temperature of a soldering iron should be adjusted 350C or lower. - No external force is applied to sealing resin during soldering operation. - Please do not handle a product until it returns to a normal temperature. Note: This product is not adaptable to reflow process. 10. Other - This product complies with RoHs directives. - This product is intended for the application in general electronic devices (such as office automation equipment, communication devices, audio-video equipment, home electrical appliances, measurement and others). In cases where this product is used for the applications that requires high reliability or could directly affect human life or health due to failure or malfunction (aerospace hardware, medical equipment, atomic control equipment and others), please consult with our sales representatives beforehand. - Our warranty does not cover situations where this product undergoes secondary fabrication such as changes in shape. -An agreement of formal product specifications is required prior to mass production. - The specifications and appearance of this product are subject to change without advanced notice. Approved Checked Drawn K.Fukasawa K.Funakubo S.Imai Mar.03.'08 Mar.03.'08 Mar.03.'08 - Mar.03.'08 New implementation Mark Date Description Appro. Symbol CITILIGHT Name CL-L230-HC10L-A Drawing No AA7E-902-01 CITIZEN ELECTRONICS CO.,LTD. Ref. CE-P296 03/08