SPECIFICATIONS 1/9 1. Scope of Application These specifications are applied to the chip type LED lamp , model CL-L233-MC13L1 2. Part code C L - L 2 3 3 - M C13 L1 Series L233 : White power LED for general lighting. Special specifications M : General Color Rendering Index Typ. 85 Type. Watt Class C13 : 13 watt package. Lighting color L1 : Energy Star Correlated Color Temperature 3000(K) Approved Checked - Apr.20.'09 New implementation Mark Date Description Appro. Drawn Symbol CITILED Name CL-L233-MC13L1 Drawing No CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P412 03/09 SPECIFICATIONS 2/9 3. Outline drawing Tolerances unless otherwise specified : ± 0.3mm Unit : mm Anode Cathode Tc Measurement Point 4. Performance ( 1 ) Absolute Maximum Rating Parameter Symbol Rating Value Unit Power Dissipation Forward Current Pd IF 17.7 0.84 W A Forward Pulse Current IFP 1.2 A Operating Temperature TOP -20 ～ +85 ℃ Storage Temperature TST -30 ～ +100 ℃ 120 ℃ Junction Temperature Tj Max *1 *2 *1Forward Current : Duty≦1/10 , Pulse Width≦10msec *2 D.C. Current : Tj = Tc + Rj-c x Pd Pulse Current : Tj = Tc + Rj-c x Pw(Power Dissipation / one-Pulse) x duty Approved Checked - Apr.20.'09 New implementation Mark Date Description Appro. Drawn Symbol CITILED Name CL-L233-MC13L1 Drawing No CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P412 03/09 SPECIFICATIONS 3/9 ( 2 ) Electro-optical Characteristics Parameter Symbol Condition MIN TYP MAX ( Tc=25℃ ) Unit Forward Voltage VF IF=720mA 17.5 18.6 21.0 V Reverse Current IR VR=15V - - 100 μA Thermal resistance RJ-C Junction-case - 2.4 - ℃/W Luminous Flax φV IF=720mA 702 900 - lm High General Color Rendering Index Ra IF=720mA 80 85 - - Chromaticity coordinates (0Condition 0:I Color Rank x y 0.4165 0.3831 0.4307 0.4157 L1 0.4542 0.4242 0.4366 0.3901 0.4165 0.3831 0 0 0 0 0.43 0.42 y 0.41 0.40 0.39 0.38 0.41 0.42 0.43 0.44 0.45 0.46 x Note 1) The tolerance of measurement at our tester is VF±3% , φv±10% , Chromaticity(x,y)±0.01. Note 2) For handling ,please apply CMOS LSI or equivalent any electrostatic effect. Approved Checked - Apr.20.'09 New implementation Mark Date Description Appro. Drawn Symbol CITILED Name CL-L233-MC13L1 Drawing No CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P412 03/09 SPECIFICATIONS 4/9 5. Characteristics ◆Forward Current vs. Relative Luminous Flux ◆Forward Current vs. Forward Voltage If - Vf Characteristics Tc=25℃ 102% 100% 100% 98% 80% VF (a.u) φv (a.u) If - φv Characteristics Tc=25℃ 120% 60% 40% 94% 92% 20% 90% 88% 0% 200 400 600 If (mA） 800 0 1000 ◆Forward Current vs. Chromaticity Coordinate If - Chromaticity Characteristics Tc=25℃ 0.020 0.015 0.010 0.005 0.000 -0.005 -0.010 ⊿x ⊿y -0.015 -0.020 0 200 400 600 800 1000 If(mA） Apr.20.'09 New implementation Mark Date Description Appro. 400 600 If (mA） 800 1000 Tc - Chromaticity Characteristics If=480mA 0.020 0.015 0.010 0.005 0.000 -0.005 -0.010 -0.015 -0.020 ⊿x ⊿y 0.0 Approved Checked - 200 ◆Case Temperature vs. Chromaticity Coordinate ⊿x,⊿y 0 ⊿x,⊿y 96% 20.0 Drawn 40.0 60.0 80.0 Tc(℃） 100.0 120.0 Symbol CITILED Name CL-L233-MC13L1 Drawing No CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P412 03/09 SPECIFICATIONS ◆Case Temperature vs. Forward Voltage ◆Case Temperature vs. Relative Luminous Flux Tc－Vf Characteristics If=720mA 110% 110% 100% 100% 90% 90% φv(a.u) Vf(a.u) 5/9 80% 80% 70% 70% 60% 60% 50% 50% 0 20 40 60 Tc(℃) 80 100 0 120 20 40 60 80 100 Tc(℃) ◆Case Temperature vs. Allowable Forward Current ◆Spectrum Tc-IF Characteristics Spectrum 120% 800 700 600 500 400 300 200 100 0 Relative luminous IF(mA) Tc－φv Characteristics If=720mA IF=720m A 100% 80% 60% 40% 20% 0% 0 25 50 75 Tc(℃) 100 125 350 Approved Checked - Apr.20.'09 New implementation Mark Date Description Appro. 450 550 650 Wavelength (nm) Drawn 750 850 Symbol CITILED Name CL-L233-MC13L1 Drawing No CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P412 03/09 SPECIFICATIONS 6/9 6. Reliability (1)Details of the tests Test Item Room Temperature Operating Life Test High Temperature Operating Life Test Low Temperature Storage Test High Temperature Storage Test Test Condition Ta=25℃,IF=720mA(Tj=72℃)×1000 hours (with Al-fin) Ta=50℃,IF=720mA(Tj=94℃)×1000 hours (with Al-fin) -30℃× 1000 hours 100℃× 1000 hours 60±2℃, 90±5%RH for 1000 hours Moisture proof Test Thermal Shock Test -30℃×30minutes - 100℃× 30minutes,100 cycle (2)Judgment Criteria of Failure for Reliability Test (Ta=25℃) Measuring Item Symbol Measuring Condition Judgment Criteria for Failure IF=720mA Forward Voltage VF >U×1.1 IF=720mA Total Luminous Flux ΦV <S×0.85 U defines the upper limit of the specified characteristics.S defines the initial value. Note1: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be returned to the normal ambient conditions after the completion of each test. Note2: CL-L221-C14L-B reliability test results will be used for CL-L233-C13N1. Approved Checked - Apr.20.'09 New implementation Mark Date Description Appro. Drawn Symbol CITILED Name CL-L233-MC13L1 Drawing No CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P412 03/09 SPECIFICATIONS 7/9 7. Packing Specifications (1) Packing One packing includes 200 pieces of LED packages. So, packing unit is 200 pieces. Note : All LED packages are placed on the tray individually. One tray includes 40 pieces of LED packages. In the packing, five trays filled with LED packages and one empty tray are stacked. The empty one tray is put on the top of trays and attached the indication label which specifies product name, quantity, lot number . < Packing figure > *Tray (Dimensions: 310 × 200 × 14.6mm / Materials: Electrically conductive PS) Cathode 310 Example of indication label 210 CUSTOMER TYPE CL-L233-MC13L1 P.NO Lot No XXXXXX Q'ty pcs PASS CITIZEN ELECTRONICS Approved Checked - Apr.20.'09 New implementation Mark Date Description Appro. Drawn Symbol CITILED Name CL-L233-MC13L1 Drawing No CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P412 03/09 SPECIFICATIONS 8/9 Precautions 1. Avoid the application of any stress to the Resin. 2. Avoid any contact by a sharp metal nail or other materials with the Resin portion. Resin portion (Shaded area) 3. This product should be secured firmly by fastening an M3 screw on both sides of the product. Please be careful not to apply any stress to the product during the clamping operation. As the connection status could vary depending on materials of outer heat sink, please check thoroughly. 11.0mm ＋ Recommended installation screw pitch ＋ 19.5mm M3 screw Spring washer (=＜Φ6mm) Plane washer (=＜Φ6mm) Thermal conductive silicone grease Outer heat sink 4. A heat radiating grease should be applied to the whole rear surface so that this product can dissipate heat as a whole. This product could be bent during the clamping operation if heat grease in sheet form is used. For this reason, it is recommended that grease in paste form is used. 5. Handling of static electricity - These products are sensitive to static electricity charge. Please take measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. - All devices, equipment and machinery must be properly grounded. It is recommended that precautions CE's lighting inspection criterion be taken against surge voltage to the equipment that mounts the LEDs. - When inspecting the final products in which LEDs were assembled, it is recommended to check whether the assembled LEDs are damaged by static electricity or not. It is easy to find static-damaged LEDs by a light-on test. *Light-on test criterion Condition Judgmental criterion IF=1mA / die No-lighting should not exist. - ESD tolerance of this product is 300V (HBM, based on JEITA ED-4701 Test B). Approved Checked - Apr.20.'09 New implementation Mark Date Description Appro. Drawn Symbol CITILED Name CL-L233-MC13L1 Drawing No CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P412 03/09 SPECIFICATIONS 9/9 Precautions (continued) 6. Please be aware that this product should not come into contact with other parts in assembled status. 7.Drive circuit - A constant current circuit is recommended as a drive circuit. And when two or more LED packages are connected, the series connection between each package is recommended. - Please design a circuit that prevents any reverse voltage (excess current) from being applied to this product instantaneously when the circuit is ON or OFF. 8. Heat generation - As this product is designed with consideration of the heat release property of module, a heat release design is required to use this product efficiently. Please ensure that heat generation is not in excess of the absolute maximum rating. (Refer to 4-1 Performance) - Factors responsible for an increase in temperature include heat generation attributed to ambient temperature conditions or power dissipation. Thus, drive conditions should be taken into consideration, depending on ambient temperature (Ta). 9. Recommended soldering - Soldering operation should be performed within 3.5 seconds per land using a soldering iron of 40W or lower. The temperature of a soldering iron should be adjusted 350C or lower. - No external force is applied to sealing resin during soldering operation. - Please do not handle a product until it returns to a normal temperature. Note: This product is not adaptable to reflow process. 10. Other - This product complies with RoHs directives. - This product is intended for the application in general electronic devices (such as office automation equipment, communication devices, audio-video equipment, home electrical appliances, measurement hardware and others). In cases where this product is used for the applications that requires high reliability or could directly affect human life or health due to failure or malfunction (aerospace hardware, medical equipment, atomic control equipment and others), please consult with our sales representatives beforehand. - Our warranty does not cover situations where this product undergoes secondary fabrication such as changes in shape. -An agreement of formal product specifications is required prior to mass production. - The specifications and appearance of this product are subject to change without advanced notice. Approved Checked - Apr.20.'09 New implementation Mark Date Description Appro. Drawn Symbol CITILED Name CL-L233-MC13L1 Drawing No CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P412 03/09