WTE POWER SEMICONDUCTORS UF1600FCT – UF1608FCT Pb 16A GLASS PASSIVATED DUAL ULTRAFAST RECTIFIER Features ! Glass Passivated Die Construction ! ! ! ! ! Ultra-Fast Switching Low Forward Voltage Drop C Low Reverse Leakage Current High Surge Current Capability G Plastic Material has UL Flammability Classification 94V-O D B Mechanical Data ! ! ! ! ! ! ! A PIN1 2 3 F Case: ITO-220, Full Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 2.24 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 ITO-220 Dim Min Max 14.60 15.40 A 9.70 10.30 B 2.55 2.85 C 3.56 4.16 D 13.00 13.80 E 0.30 0.90 F 3.00 Ø 3.50 Ø G 6.30 6.90 H 4.20 4.80 I 2.50 2.90 J 0.36 0.80 K 2.90 3.30 L 2.29 2.79 P All Dimensions in mm E P I H L J PIN 1 - + PIN 3 - PIN 2 K Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage UF UF UF UF UF UF UF 1600FCT 1601FCT 1602FCT 1603FCT 1604FCT 1606FCT 1608FCT Unit VRRM VRWM VR 50 100 200 300 400 600 800 V VR(RMS) 35 70 140 210 280 420 560 V Average Rectified Output Current @TC = 105°C IO 16 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 125 A Forward Voltage VFM @IF = 8.0A Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 125°C 1.0 1.3 1.7 10 500 IRM V µA Reverse Recovery Time (Note 1) trr 50 100 nS Typical Junction Capacitance (Note 2) Cj 80 50 pF Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. UF1600FCT – UF1608FCT 1 of 4 © 2006 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 20 16 12 8 4 0 0 50 100 100 1600 - 1602 1606 - 1608 1.0 Pulse width = 300µs 2% duty cycle 0.1 0 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.6 1.2 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 400 225 Tj = 25°C f = 1.0MHz 8.3 ms single half-sine-wave JEDEC method Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 1603 - 1604 10 150 75 100 UF1600FCT UF1604FCT UF1606FCT UF1608FCT 10 0 1 0.1 100 10 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Maximum Non-Repetitive Surge Current trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (+) (-) 0A Pulse Generator (Note 2) 50V DC Approx (-) 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit UF1600FCT – UF1608FCT 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION WTE UF160xFCT WTE UF160xFCT x Polarity = Manufacturer’s Logo = Device Number = 0, 1, 2, 3, 4, 6 or 8 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT The full molded plastic package affords a major reduction of hardware as compared to a standard TO-220 package. However, precautions should be made in mounting procedure. 6-32 HEX Head Screw Plain Washer A conical washer should be used to apply proper force to the device. Screw should not be tightened with any type of air-forced torque or equipment that may cause crack on device package. Rectifier Heatsink Conical Washer 6-32 HEX Nut A layer of thermal grease or thermal pad in the interface will be considerably helpful for heat dissipation. UF1600FCT – UF1608FCT 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity UF1600FCT ITO-220 50 Units/Tube UF1601FCT ITO-220 50 Units/Tube UF1602FCT ITO-220 50 Units/Tube UF1603FCT ITO-220 50 Units/Tube UF1604FCT ITO-220 50 Units/Tube UF1606FCT ITO-220 50 Units/Tube UF1608FCT ITO-220 50 Units/Tube 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, UF1600FCT-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com We power your everyday. UF1600FCT – UF1608FCT 4 of 4 © 2006 Won-Top Electronics