SE-410 S TA R T C O E N G I N E E R I N G LT D . 406 Jessop Avenue Saskatoon, Saskatchewan Canada S7N 2S5 Ph: (306) 373-5505 Fx: (306) 374-2245 www.startco.ca SELECTOR SWITCH 5 6 4 7 3 8 2 9 1 10 S TA R T C O SE-410 E N G I N E E R I N G LT D . Manuals and additional information available at SE-410 www.startco.ca SELECTOR SWITCH The SE-410 is a selector switch for use with a SE-400 or SE-100T Ground-Fault-Relay Test Unit. It allows up to ten ground-fault circuits to be individually tested with one ground-faultrelay test unit. DIMENSIONS SELECTOR SWITCH 8 5 4 7 3 8 2 9 1 10 7 9 6 6 5 10 4 3 C S TA R T C O E N G I N E E R I N G LT D . 1 SE-410 FRONT VIEW WRITE-ON AREAS SURFACE MOUNT SIDE VIEW 2 PANEL MOUNT REAR VIEW DIMENSIONS IN SURFACE-MOUNT MOUNTING DETAIL MILLIMETRES (INCHES) PANEL-MOUNT MOUNTING DETAIL TYPICAL APPLICATION SE-410 SE-400 TECHNICAL SPECIFICATIONS Contact Rating . . . . 15 A, 120 Vac Resistive; 7.5 A, 240 Vac Resistive; 1 A, 120 Vdc Resistive. Terminals . . . . . . . 0.25² Faston Specifications are subject to change without notice. Startco Engineering Ltd. is not liable for contingent or consequential damages, or for expenses sustained as a result of incorrect application, incorrect adjustment, or a malfunction. Copyright © 1999. Printed in Canada. Publication: SE-410-D Revised: 9904 Printed: 9904 S TA R T C O E N G I N E E R I N G LT D . 406 Jessop Avenue, Saskatoon, Saskatchewan, Canada S7N 2S5 Phone: (306) 373-5505 Fax: (306) 374-2245 www.startco.ca