Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series 216 Series, 5×20 mm, Fast-Acting Fuse RoHS PS E Pb Description 5×20mm fast-acting ceramic body cartridge fuse designed to IEC specification. Features • Designed to International (IEC ) Standards for use globally • Meets the IEC 60127-2, sheet 1 specification for fast-acting fuses Agency Approvals Agency PS E Ampere Range Cartridge: 1-5A NBK 080205-E10480A 6.3A-10A NBK 250702-E10480E 12.5A NBK 240108-JP1021C 16A NBK 240108-JP1021E Leaded: 1-5A NBK 080205-E10480B 6.3A-10A NBK 250702-E10480F 12.5A NBK 240108-JP1021D 16A NBK 240108-JP1021F 1A – 16A SU05001-2013 Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating 0.05A – 6.3A 150% 1A – 10A 210% E10480 0.05A – 16A 275% 29862 1402843 0.05A - 10A, 16A 40013834 0.05A – 6.3A *8A, *10A 40016442 *12.5A KM41462 1A – 6.3A J50248090 8A – 16A N/A • RoHS compliant and lead-free Applications Agency File Number 2003010207079960 • Available in cartridge and axial lead form 0.05A – 16A 400% 1000% Ampere Rating Opening Time 0.05A – 4A 60 minutes, Minimum 5A – 6.3A 60 minutes, Minimum 8A – 16A 30 minutes, Minimum 0.05A – 4A 30 minutes, Maximum 5A – 6.3A 30 minutes, Maximum 8A – 16A 30 minutes, Maximum 0.05A – 4A 0.01 sec.., Min.; 2 sec. Max. 5A – 6.3A 0.01 sec.., Min.; 3 sec. Max. 8A – 16A 0.04 sec., Min.; 20 sec. Max. 0.05A – 4A .003 sec., Min.; 0.3 sec. Max. 5A – 6.3A .003 sec., Min.; 0.3 sec. Max. 8A – 16A .01 sec.., Min.; 1.0 sec. Max. 0.05A – 4A .02 seconds, Maximum 5A – 6.3A .02 seconds, Maximum 8A – 16A .03 sec.onds, Maximum Additional Information *Approval for Cartridge versions only Datasheet Resources Samples © 2015 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 06/18/15 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Electrical Characteristics Specifications by Item Nominal Amp Voltage Nominal Amp Interrupting Cold Rating Rating Melting Code Rating Resistance 2 (A) (V) I t (A2 sec) (Ohms) Agency Approvals Maximum Maximum Voltage Power Drop at Dissapation Rated at 1.5ln Current (W) (mV) PS E .050 0.05 250 15.9000 0.00019 10000 1.6 x x x x x x .063 0.063 250 10.4500 0.00079 8800 1.6 x x x x x x .080 0.08 250 7.8850 0.00084 7600 1.6 x x x x x x .100 0.1 250 5.7925 0.00450 7000 1.6 x x x x x x .125 0.125 250 3.6750 0.00546 5000 1.6 x x x x x x .160 0.16 250 5.3490 0.00326 4300 1.6 x x x x x x .200 0.2 250 3.3500 0.00439 3500 1.6 x x x x x x .250 0.25 250 2.3500 0.01350 2800 2.5 x x x x x x .315 0.315 250 1.8500 0.02320 2500 2.5 x x x x x x .500 0.5 250 0.8660 0.16500 1800 2.5 x x x x x x .630 0.63 250 0.4650 0.05940 1500 2.5 x x x x x x .800 0.8 250 0.2950 0.14600 1200 2.5 x x x x x x 001. 1 250 0.2370 0.18000 1000 2.5 x x x x x x x x x 1.25 1.25 250 0.1530 0.48000 800 4 x x x x x x x x x 01.6 1.6 250 0.1112 1.00500 600 4 x x x x x x x x x 002. 2 250 0.0764 1.87000 500 4 x x x x x x x x x 02.5 2.5 250 0.0584 3.67200 400 4 x x x x x x x x x 3.15 3.15 250 0.0368 6.70000 350 4 x x x x x x x x x 004. 4 250 0.0247 14.99500 300 4 x x x x x x x x x 005. 5 250 0.0183 27.46000 250 4 x x x x x x x x x 06.3 6.3 250 0.0137 56.43000 200 4 x x x x x x x x 008. 8 250 0.0123 64.31500 200 4 x x x x x x* x x 010. 10 250 0.0079 154.34000 200 4 x x x x x x* x x 12.5 12.5 250 0.0057 175.00000 200 N/A** x x x x 0.0040 462.50000 200 N/A** x x x x 016. 16 250 1500A@ 250Vac 750A@ 250Vac * Approval for cartidge versions only. N/A** - Please contact Littelfuse for details on these parameters I2t test at 10x rated current x x x x* x Average Time Current Curves 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A 12.5A 16A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 0.01 0.001 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/18/15 0.01 0.1 1 10 CURRENT IN AMPERES 100 1000 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 Lead-Free Recommendation 240 Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Product Characteristics Material Terminal Strength Solderability Product Marking Packaging Body: Ceramic Cap: Nickel–plated brass Leads: Tin–plated Copper Filler (160mA-16A): Sand MIL-STD-202, Method 211, Test Condition A MIL-STD-202 Method 208 Cap 1: Brand logo, current and voLage rating Cap 2: Agency approval markings Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/ reel) Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles –65°C to +125°C) Vibration MIL-STD-202, Method 201 Humidity MIL-STD-202, Method 103, Test Condition A. high RH (95%) and elevated temperature (40°C) for 240 hours. Salt Spray MIL-STD-202, Method 101, Test Condition B © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/18/15 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Dimensions Part Numbering System 0216 xxxx M X E P 20±0.5 0216 000XP +0.1 5.2 −0.2 5.1±0.6 Series 5.1±0.6 Amp Code 0216.050XEP to 0216.800XEP 0216001.XEP to 0216016.XEP 40±1.0 Refer to Amp Code column of Electrical Characteristics Table 5.6±0.4 21.5±1.0 Quantity Code 0.65±0.05 40±1.0 M = 1000 Packaging Code 5.5±0.3 21.5±1.0 X = Filler Option Codes 0.65±0.05* Blank : Cartidge Type Fuse E : Axial Leaded Fuse All dimensions in mm Lead-free Notes: * Ratings above 6.3 A have 0.8 ± 0.05 diameter lead. Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A EIA 296-E N/A N/A N/A 1000 1000 1000 1000 1000 100 MX MXE MRET1 MXG MXB HX N/A N/A T1=53mm (2.087”) N/A N/A N/A 216 Series Bulk Bulk Reel and Tape Bulk Bulk Bulk © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/18/15