Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 219XA Series 219XA Series, 5×20mm, Time-Lag Fuse RoHS Pb PS E Description 5×20mm time-Lag glass body cartridge fuse designed to IEC specification Features • Designed to International IEC Standards for use globally • Meets the IEC 60127-2, Sheet 6 specification for time-Lag fuses Agency Approvals Agency Agency File Number PS E Cartridge: NBK220604-E10480A NBK120802-E10480C Leaded: NBK220604-E10480B NBK120802-E10480D 2004010207110266 2003010207079982 1A – 5A 6.3A 1A – 5A 6.3A 0.125A – 0.800A 1A – 6.3A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating 0.040A – 6.3A 210% 29862 1402844 • RoHS compliant and lead-free Applications Ampere Range 150% E10480 • Available in cartridge and axial lead form 0.125A – 6.3A 275% 0.040A – 6.3A 400% 40016080 0.125A – 6.3A KM41462 0.125A – 6.3A N/A 0.040A – 6.3A 1000% Ampere Rating Opening Time 0.04A - 0.1A 1 hours, Minimum 0.125A – 6.3A 1 hours, Minimum 0.04A - 0.1A 2 minutes, Maximum 0.125A – 6.3A 2 minutes, Maximum 0.04A - 0.1A 0.2 sec., Min; 10 sec. Max 0.125A – 6.3A 0.6 sec., Min; 10 sec. Max 0.04A - 0.1A 0.04 sec., Min; 3 sec. Max 0.125A – 6.3A .15 sec., Min; 3 sec. Max 0.04A - 0.1A .01 sec., Min; 0.3 sec. Max 0.125A – 6.3A .02 sec., Min; 0.3 sec. Max Additional Information Datasheet Resources Samples Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 06/06/16 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 219XA Series Electrical Characteristic Specifications by Item Nominal Amp Voltage Amp Interrupting Cold Rating Rating Code Rating Resistance (A) (V) (Ohms) Nominal Melting I2t (A2 sec) .040 0.01640 0.040 250 31.8620 Maximum Maximum Voltage Drop Power at Rated Dissipation Current at 1.5ln (mV) (W) 4000 Agency Approvals PS E 1.6 x x x .050 0.050 250 21.2920 0.01700 3500 1.6 x x x .063 0.063 250 14.2685 0.03800 3000 1.6 x x x .100 0.100 250 6.0180 0.07900 2500 1.6 .125 0.125 250 4.2000 0.13000 2000 1.6 x x x x x x x x x x .160 0.160 250 2.5500 0.31000 1900 1.6 x x x x x x x .200 0.200 250 1.6000 0.32000 1500 1.6 x x x x x x x .250 0.250 250 1.0495 0.54000 1300 1.6 x x x x x x x .315 0.315 250 0.8475 1.23000 1100 1.6 x x x x x x x .400 0.400 250 0.5350 1.40000 1000 1.6 x x x x x x x .500 0.500 250 0.3700 3.00000 900 1.6 x x x x x x x .630 0.630 250 0.2750 4.82000 300 1.6 x x x x x x x .800 0.800 250 0.1635 9.35000 250 1.6 x 001. 1.00 250 0.1165 19.20000 150 1.6 x 150A @ 250VAC x x x x x x x x x x x x x 1.25 1.25 250 0.0817 27.15000 150 1.6 x x x x x x x x 01.6 1.60 250 0.0551 44.20000 150 1.6 x x x x x x x x 002. 2.00 250 0.0452 92.70500 150 1.6 x x x x x x x x 02.5 2.50 250 0.0305 138.00000 120 1.6 x x x x x x x x 3.15 3.15 250 0.0231 202.00000 100 1.6 x x x x x x x x 004. 4.00 250 0.0158 330.00000 100 1.6 x x x x x x x x 005. 5.00 250 0.0117 544.00000 100 1.6 x x x x x x x x 06.3 6.3 250 0.0107 1093.03500 100 1.6 x x x x x x x x *4A-6.3A have an Interrupting rating 100A@350Vac. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/06/16 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 219XA Series 2.5A 3.15A 4A 5A 6.3A Average Time Current Curves 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.1 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds 40 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/06/16 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 219XA Series Product Characteristics Materials Body: Glass Cap: Nickel Plated Brass Leads: Tin Plated Copper Operating Temperature –55ºC to +125ºC Terminal Strength MIL-STD-202, Method 211. Test Condition A Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles –65OC to +125OC) Solderability MIL-STD-202 Method 208 Vibration MIL-STD-202, Method 201 Product Marking Cap 1: Brand logo, current and voltage rating Cap 2: Agency approval markings Series Humidity MIL-STD-202, Method 103, Test Condition A high RH (95%) and elevated temperature (40O C) for 240 hours. Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel) Salt Spray MIL-STD-202 Method 101, Test Condition B Dimensions Part Numbering System 0219 xxxx M XA E P 20+0.5 0219 000XAP 5.2+0.1 -0.2 5.1+0.6 Lead-free Amp Code Option Codes Refer to Amp Code column of Electrical Characteristics Table 5.5±0.3 21.5±1.0 40±1.0 0219000XAEP 5.1+0.6 Series Blank : Cartidge Type Fuse E : Axial Leaded Fuse Quantity Code Notes: * Ratings above 6.3A have 0.8±0.05 diameter lead. Packaging Code M = 1000 0.65±0.05* X = Filler A = Enhanced l sq t All dimensions in mm Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A EIA 296-E N/A 1000 1000 1000 1000 MXA MXAE MRAET1 MXG N/A N/A T1=53mm (2.087”) N/A 219XA Series Bulk Bulk Reel and Tape Bulk Recommended Accessories Accessory Type Holder Block Clip Max Application Voltage Max Application Amperage Series Description 345_ISF Panel Mount Shock-Safe Fuseholder 10 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK® Fuse Block 10 250 646 PC Mount Miniature Fuse Block 658 Surface Mount Miniature Fuse Block 6.3 10 520_W PC Mount Miniature Fuse Clip 6.3 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/06/16