Gas Discharge Tube (GDT) Products SL1122A Series SL1122A Series Hybrid RoHS Description The SL1122A series Hybrid features a high performance Alpha Gas Plasma Tube in conjunction with a MOV. These devices are matched so that high speed pulses are initially clamped by the MOV, then as the current rises, the transient energy is switched through the gas tube. The Hybrid offers high levels of performance on fast rising transients in the domain of 100V/µs to 10 kV/µs, so eliminates the dv/dt switching delay normally exhibited by standard GDTs. These devices are extremely robust and are able to divert a 10,000 Amp pulse without destruction. Agency Approvals Features AGENCY •RoHs Compliant •Excellent response to fast rising transients •Flat response up to 10kV/μs AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol •10kA surge capability tested with 8/20μs pulse as defined by IEC 61000-4-5 • Thermal failsafe Applications a b (centre electrode) •MDF protection •ADSL equipment •XDSL equipment •Alarm panels •General telecom equipment e Electrical Characteristics Device Specifications (at 25°C) Part Number DC Breakdown in Volts1, 2 (@100V/s) DC Voltage2 (1kV/μs Ignition Time) MIN TYP MAX SL1122A090 72 90 108 200 (< 10µs) SL1122A230 184 230 276 350 (< 10µs) SL1122A260 210 260 310 400 (< 10µs) Life Ratings Surge Life1 Surge Current1 ACNominal Holdover Discharge DCVoltage (@1MHz, 0V bias, (on state voltage) (10/1000μs (8/20μs x 10) Current1 (<150msecs.) Capacitance Arc Voltage 1V oscillation) @1Amp Min MIN MAX TYP > 108 Ω (at 50V) 270 pF > 108 Ω (at 100V) 100 pF Insulation Resistance ~10 to 35 Volts 300x +/-) (10x1s@50Hz) TYP 50 V 200 A 10 kA 10 A 135 V Tested in accordance with ITU-T Rec K.12 Notes: 1. Total current through centre electrode 2. Maximum Peak Break Over Voltage © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/13/15 Gas Discharge Tube (GDT) Products SL1122A Series Product Characteristics Materials Electrode Base: Copper Electrode Plating: Bright Tin Body: Ceramic Product Marking Littelfuse 'LF' Mark, voltage and date code. Red. Glow to Arc Transition Current ~1 Amp Glow Voltage ~60 to 200 Volts Storage and Operational Temperature -40 to +90°C Transverse Voltage (Delay Time) < 0.2 µSec. (Tested to ITU-T Rec.K.12) Packaging Dimensions Device Dimensions Radial Lead Devices For Radial Lead Items: Packed in tray (100 pcs) Dimensions are in millimeters [and inches] TOP VIEW PROFILE VIEW 14.3 ± 0.3 [0.562 ± 0.012] 8.3 ± 0.3 [0.327 ± 0.012] Part Numbering System and Ordering Information SL1122A XXX X Voltage 10.5 Max [0.413] 1.5 Min [0.059] 15.0 ± 1.0 [0.591 ± 0.039] 4.40 ± 0.3 4.40 ± 0.3 [0.173 ± 0.012] [0.173 ± 0.012] © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/13/15 1.0 [0.039] Pin Configuration Gas Discharge Tube (GDT) Products SL1122A Series Soldering Parameters - Reflow Soldering Pb-free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 180 seconds Average Ramp-up Rate (Liquidus Temp (TL) to peak) 3°C/second max. TS(max) to TL - Ramp-up Rate 5°C/second max. Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds 260+0/-5 °C Time within 5°C of Actual Peak Temperature (tp) 10 – 30 seconds Ramp-down Rate 6°C/second max. Time 25°C to Peak Temperature (TP) 8 minutes max. Do not exceed 260°C Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-down Preheat TS(min) 25 Peak Temperature (TP) tP TP Temperature Reflow Condition tS time to peak temperature (t 25ºC to peak) Time * Devices that are soldered require inspection before use. Soldering Parameters - Wave Soldering (Thru-Hole Devices) Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 280° C Maximum Solder Dwell Time: 2-5 seconds 40 230 240 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 20 0 0 30 20 10 Temperature (°C) - Measured on bottom side of board 300 Time (Seconds) Cooling Time Preheat Time Dwell Time Soldering Parameters - Hand Soldering Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/13/15