Axial Lead & Cartridge Fuses 2AG > Slo-Blo® Fuse > 2205 Series 2205 Series, Lead-Free 2AG, Slo-Blo® Fuse RoHS Pb Description The 2AG Slo-Blo® Axial Leaded Fuses provide the same performance characteristics as their 3AG counterpart while occupying one-third the space. Features • Available in axial lead form and with various lead forming dimensions • In accordance with Underwriter’s Laboratories Standard UL 248-14 • Fuses are boardwashable in most solvents with thermoplastic sleeve Agency Approvals Agency Agency File Number Ampere Range E10480 0.250A - 2.5A 29862 0.250A - 2.5A N/A 0.250A - 2.5A Applications Used as supplimentary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series Additional Information Datasheet Resources • RoHS compliant and lead–free % of Ampere Rating Opening Time 100% 4 hours, Minimum 135% 1 hour, Maximum 200% 3 secs Min.; 20 secs Max. Samples Electrical Characteristic Specifications by Item Ampere Rating (A) Amp Code Max Voltage Rating (V) 0.25 0.35 0.375 0.5 0.75 1 1.25 1.5 2 2.5 .250 .350 .375 .500 .750 001 1.25 01.5 002 02.5 250 250 250 250 250 250 250 250 250 250 Interrupting Rating 35A@250Vac 10KA@125Vac 60A@600Vac 35A@250Vac 10KA@125Vac Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Nom Voltage Drop (mV) Nom Power Dissipation (W) 2.4300 1.3100 1.1685 0.6935 0.3430 0.2120 0.1460 0.1077 0.0698 0.0502 0.334 0.490 0.83 1.63 3.91 5.64 17.0 20.8 40.0 65.0 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Agency Approvals x x x x x x x x x x x x x x x x x x x x © 2015 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 07/17/15 Axial Lead & Cartridge Fuses 2AG > Slo-Blo® Fuse > 2205 Series 1000 .250A .375A .500A .750A 1.00A 1.50A 2.0A 2 .5A Average Time Current Curves Temperature Re-rating Curve TIME IN SECONDS 100 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 10 1 0.1 0.01 0.1 1 10 100 CURRENT IN AMPERES 1000 Soldering Parameters - Wave Soldering Recommended Process Parameters: Wave Parameter 280 260 240 Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Max Solder Dwell Time: 2-5 seconds 60 Recommended Hand-Solder Parameters: 40 Time (Seconds) Cooling Time Preheat Time Dwell Time © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/17/15 230 240 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 20 0 0 30 20 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Axial Lead & Cartridge Fuses 2AG > Slo-Blo® Fuse > 2205 Series Product Characteristics Body: Glass Cap : Nickel–plated brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202, Method 107, Test Condition B (5 Cycles -65ºC to +125ºC). Solderability MIL-STD-202 Method 208 Vibration MIL-STD-202, Method 201 Product Marking Cap1 : Brand logo, current and voltage ratings Cap2 : Series and agency approval marks Humidity MIL-STD-202, Method 103, Test Condition A: High RH (95%) and Elevated Temp (40ºC) for 240 hours Salt Spray MIL-STD-202, Method 101, Test Condition B Materials Terminal Strength Dimensions Part Numbering System 2205 000P Series 4.2 - 4.8 (.16" - .19”) .635 ± .06 (.025" ± .002”) 14.1 - 14.9 (.56" - .59”) 38.1 ± 1 (1.50" ± .04”) TYP. Packaging Packaging Option Packaging Specification Bulk N/A Bulk N/A Quantity & Packaging Code Reel Size 100 HX N/A 1000 MX N/A Quantity © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/17/15