HIGH CURRENT INDUCTORS FOR INVERTER SYSTEMS H1300 SERIES • Ideal for use in PV Inverters, String Inverters, Bidirectional Inverters • Flat wire coil minimizes losses at high frequency • Superior thermal management and significantly reduced size and weight compared with conventional toroid designs • Operating Temperature -40ºC to +180ºC • Custom Design Available up to 500A current for inverter systems 20kW and up ELECTRICAL PARAMETERS @ 25°C Part Number Isat Irms (A) TYP (A) TYP INDUCTANCE (μH) DCR (mΩ) SRF (MHz) ±12% MAX TYP 10% Drop 20% Drop 30% Drop 20ºC Rise 40ºC Rise 26.0 1.5 11.5 55 83 107 67 101 H1300-260 H1300-400 40.0 2.3 9.0 44 65 85 53 81 H1300-780 78.0 4.2 6.2 31 47 61 39 59 H1300-940 94.0 3.1 6.5 28 43 56 35 54 H1300-151 150.0 8.7 4.4 23 34 44 27 41 H1300-161 160.0 9.0 3.5 22 32 42 26.5 40.5 H1300-241 244.0 12.0 3.0 17.5 26.5 34.5 23.5 35.5 Note: 1. Inductance measured at 100KHz, 1Vrms 2. Isat is the DC current where the inductance drops the specified amount from its original value without bias. 3. Irms is the DC current that causes the specified temperature rise of the winding from 25°C ambient for the inductor without housing or potting. Aluminum case, thermal conductive epoxy, or thermal pads can be added to improve cooling. 4. Leads are for referance only. Final mounting configuration to be determined by customer. DIMENSIONS 2.85 [72,4] 2.65 Max [67,3] Ø0.20(x4) [5,1] 1.50 [38,1] 0.25(x2) [6,35] 1.00(x2) Typ [25,4] 2.40 Max [61,0] MPS H1300-XXX Date Code 2.17 Max [55,0] 3.40 Max [86,4] Leads are for referance only. Final mounting configuration to be determined by customer. Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com [email protected]