TOROIDAL POWER INDUCTORS P11T500 SERIES • Toroidal power inductors with high current capacity • Low radiation • Low core loss • Low core saturation • Operating temperature range: -55°C to +105°C • Add -V for Vertical Mount, -H for Horizontal Mount after the part number • RoHS compliant product ELECTRICAL PARAMETERS @ 25°C Part Number Rated Current (A) DCR (mΩ MAX) P11T500- Inductance (μH) (±20%) DIMENSION A (Nom) DIMENSION B (Nom) DIMENSION C (Nom) R3 0.3 28.5 1.0 0.35 0.60 0.059 R5 0.5 24.7 1.2 0.35 0.60 0.059 R8 0.8 22.1 1.4 0.35 0.60 0.059 1R2 1.2 20.2 1.7 0.35 0.60 0.059 1R5 1.5 18.7 2.0 0.35 0.60 0.059 2R0 2 15.6 2.7 0.34 0.59 0.053 2R7 2.7 14.7 3.0 0.34 0.59 0.053 3R3 3.3 11.1 5.3 0.33 0.58 0.042 3R9 3.9 10.5 5.9 0.33 0.58 0.042 4R7 4.7 10.1 6.4 0.33 0.58 0.042 5R6 5.6 9.7 6.9 0.33 0.58 0.042 6R8 6.8 7.2 13.0 0.31 0.56 0.034 L = ±15% 8R2 8.2 7.0 14.0 0.31 0.56 0.034 100 10 6.6 15.0 0.31 0.56 0.034 120 12 6.4 16.0 0.31 0.56 0.034 150 15 4.7 29.0 0.29 0.53 0.027 180 18 4.5 32.0 0.29 0.53 0.027 220 22 4.3 35.0 0.29 0.53 0.027 270 27 4.1 39.0 0.29 0.53 0.027 330 33 3.5 54.0 0.29 0.53 0.024 390 39 3.3 59.0 0.29 0.53 0.024 470 47 3.2 64.0 0.29 0.53 0.024 Note: 1. Inductance measured: 1KHz, 0.1Vrms 2. Irated: Δ40°C temperature rise max Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com [email protected] TOROIDAL POWER INDUCTORS P11T500 SERIES DIMENSIONS (inch) Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.008 .XXX : ±0.004 mm: X,X : ±0,20 X,XX : ±0,10 www.mpsind.com [email protected]