UNSHIELDED RADIAL POWER INDUCTORS P11R20810 SERIES • Small footprint package • High efficiency and low cost • Open construction with sleeve to protect winding • Inductance tolerance: M = ±20%, K = ±10% • Operating temperature range: -40oC to +85oC • Storage temperature range: -40oC to +125oC • RoHS compliant product ELECTRICAL PARAMETERS @ 25°C Part Number Inductance (μH) Q (Min) DCR (Ω MAX) Isat (A) 1R0M 1.0 90 0.02 3.40 1R2M 1.2 90 0.02 3.40 1R5M 1.5 95 0.02 3.40 1R8M 1.8 95 0.03 3.30 2R2M 2.2 100 0.03 3.00 2R7M 2.7 110 0.04 3.00 3R3M 3.3 110 0.04 3.00 3R9M 3.9 110 0.05 2.90 4R7M 4.7 110 0.05 2.90 5R6M 5.6 110 0.06 2.60 6R8M 6.8 90 0.06 2.50 8R2M 8.2 80 0.06 2.00 100K 10 90 0.10 1.60 120K 12 90 0.10 1.40 150K 15 90 0.10 1.30 180K 18 80 0.11 1.20 220K 22 70 0.13 1.10 270K 27 70 0.14 1.00 330K 33 70 0.16 0.90 390K 39 70 0.16 0.80 470K 47 70 0.16 0.70 560K 56 60 0.22 0.70 680K 68 60 0.23 0.60 820K 82 60 0.27 0.50 101K 100 40 0.29 0.40 121K 120 40 0.33 0.40 151K 150 40 0.46 0.35 181K 180 40 0.51 0.35 221K 220 40 0.62 0.30 P11R20810- Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com [email protected] UNSHIELDED RADIAL POWER INDUCTORS P11R20810 SERIES ELECTRICAL PARAMETERS @ 25°C Part Number Inductance (μH) Q (Min) DCR (Ω MAX) Isat (A) 271K 270 30 0.65 0.25 331K 330 30 0.79 0.25 391K 390 30 0.91 0.20 P11R20810- 471K 470 30 1.2 0.18 561K 560 30 1.2 0.16 681K 680 30 1.5 0.14 821K 820 25 1.7 0.14 50 2.0 0.12 Inductance (mH) 102K 1.0 122K 1.2 45 2.3 0.10 152K 1.5 45 2.9 0.08 182K 1.8 45 3.5 0.08 222K 2.2 50 4.2 0.07 272K 2.7 50 5.1 0.06 332K 3.3 50 6.1 0.06 392K 3.9 50 8 0.05 472K 4.7 55 11 0.05 562K 5.6 55 11 0.045 682K 6.8 55 14 0.045 822K 8.2 60 15 0.040 103K 10 100 20 0.035 123K 12 100 24 0.035 153K 15 100 28 0.035 183K 18 100 42 0.030 223K 22 100 43 0.030 273K 27 100 55 0.025 333K 33 90 65 0.025 393K 39 90 87 0.025 473K 47 85 98 0.250 563K 56 80 128 0.020 683K 68 70 141 0.020 823K 82 70 161 0.020 104K 100 55 180 0.020 Note: 1. Inductance measured: <100µH : 100KHz, 0.25Vrms 2. Inductance measured: ≥100µH : 1KHz, 0.25Vrms 3. Irated: 10% drop typical from initial inductance value and/or ΔT=40°C Temp Rise typical Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com [email protected] UNSHIELDED RADIAL POWER INDUCTORS P11R20810 SERIES DIMENSIONS (mm) Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]