FLAT WIRE HIGH CURRENT INDUCTOR H1101 SERIES • High Current Inductors (inductance range from 10μH to 100μH) in a compact size package (33.5mm x 28mm x 26mm) • Flat wire coil minimizes losses at high frequency • Vertical and horizontal mount versions available (add -V or -H after part number for mounting version) • Operating Temperature -40ºC to +150ºC • RoHS Compliant Product • Custom Design Available ELECTRICAL PARAMETERS @ 25°C Part Number INDUCTANCE (μH) ±10% DCR (mΩ) MAX SRF (MHz) TYP Isat (A) Typ 10% drop Irms (A) Typ 20ºC rise Irms (A) Typ 40ºC rise H1101-100 10 2.8 18.3 49.5 25 38 H1101-150 15 2.8 14.7 33.0 25 38 H1101-220 22 2.8 11.5 22.5 25 38 H1101-330 33 2.8 9.1 15.0 25 38 H1101-470 47 2.8 7.8 10.5 25 38 H1101-680 68 2.8 5.9 7.0 25 38 H1101-101 100 2.8 4.5 5.0 25 38 Note: 1. Inductance measured at 100KHz, 0.1Vrms 2. Isat is DC current at which the inductance drops the specified amount from its original value without bias. 3. Irms is the DC current that causes the specified temperature rise of the winding from 25°C ambient for the inductor. DIMENSIONS (inch / [mm]) VERTICAL MOUNT 1.32 MAX [33,5] 0.98 Max [25,0] HORIZONTAL MOUNT 0.85 Max [21,5] 1.32 MAX [33,5] MPS H1100-XXX-V Date Code 1.10 MAX [28,0] Recommended PCB Layout MPS H1101-XXX-H Date Code 0.236 [6,00] 0.25 Nom [6,35] 0.047 Typ [1,20] 0.197 Typ [5,00] 0.53 Typ [13,5] 0.53 Typ [13,5] 0.197 Typ [5,00] 0.073 [1,85] 0.53 [13,5] 0.41 Typ [10,5] 0.236 [6,00] Recommended PCB Layout 0.41 [10,5] 0.073 [1,85] 0.53 [13,5] Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 1.02 MAX [26,0] 0.25 NOM [6,35] 0.047 Typ [1,20] Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]