UFF10A60

MOSPEC
UFF10A60
Switchmode
Full Plastic Ultrafast Power Rectifiers
ULTRA FAST
RECTIFIERS
Designed for use in switching power supplies. inverters and as free
wheeling diodes. These state-of-the-art devices have the following
features:
10 AMPERES
600 VOLTS
*Low TRR
*High Surge Capacity
*Low Power Loss, High efficiency
*Glass Passivated chip junctions
*175℃ Operating Junction Temperature
*Low Stored Charge Majority Carrier Conduction
*Low Forward Voltage , High Current Capability
*High-Switching Speed 35 Nanosecond Recovery Time
*Plastic Material used Carries Underwriters Laboratory
Mechanical Data
*Case :JEDEC ITO-220AC molded plastic body
*Terminals: Plated lead, solderable per MIL-STD-750, Method 2026
*Polarity: As marked
*Mounting Torque: 4-6kg.cm
*Weight:1.7 g approx.
ITO-220AC
*In compliance with EU RoHs 2002/95/EC directives
MAXIMUM RATINGS
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectifier Forward Current
Total Device (Rated VR),TC=55℃
Peak Repetitive Forward Current
(Rate VR, Square Wave, 20kHz,TC=125℃)
Non-Repetitive Peak Surge Current
(Surge applied at rate load conditions
half-wave, single phase, 60Hz)
Operating and Storage Junction
Temperature Range
Symbol
UFF10A60
Unit
VRRM
VRWM
VR
600
V
VR(RMS)
420
V
IF(AV)
10
A
IFM
20
A
IFSM
175
A
TJ , Tstg
-65 to +175
℃
DIM
ELECTRIAL CHARACTERISTICS
Characteristic
Symbol
Maximum Instantaneous Forward Voltage
( IF =10 Amp TC = 25℃)
( IF =10 Amp TC = 125℃)
VF
Maximum Instantaneous Reverse Current
( Rated DC Voltage, TC = 25℃)
( Rated DC Voltage, TC = 125℃)
IR
Reverse Recovery Time
( IF = 0.5 A, IR =1.0 , Irr =0.25 A )
Trr
20
Rθ j-c
3.6
Typical Thermal Resistance junction to
case
Min
TYPE
MAX.
Unit
2.2
1.95
2.5
2.3
V
25
10
uA
mA
25
ns
℃/w
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
MILLIMETERS
MIN
MAX
15.05
15.15
13.35
13.45
10.00
10.10
6.55
6.65
2.65
2.75
1.00
1.15
1.25
0.55
0.65
4.80
5.20
3.00
3.20
1.10
1.20
0.55
0.65
4.40
4.60
1.15
1.25
3.35
3.45
2.65
2.75
3.15
3.25
UFF10A60
FIG-3 FORWARD CURRENT DERATING CURVE
AVERAGE FORWARD RECTIFIED CURRENT (Amp.)
AVERAGE FORWARD RECTIFIED CURRENT (Amp.)
FIG-1 TYPICAL FORWARD CHARACTERISITICS
LEAD TEMPERATURE (℃)
FIG-4 TYPICAL JUNCTION CAPACITANCE
TJ=125℃
REVERSE VOLTAGE (Volts.)
FIG-5 PEAK FORWARD SURGE CURRENT
TJ=25℃
PERCENT OF PEAK REVERSE VOLTAGE (﹪)
PEAK FORWARD SURGE CURRENT (Amp.)
INSTANTANEOUS REVERSE CURRENT (mA.)
FIG-2 TYPICAL REVERSE CHARACTERISTICS
JUNCTION CAPACITANCE (PF)
FORWARD VOLTAGE (Volts)
NUMBER OF CYCLES AT 60 Hz
Set time base for 10/20 ns/cm
FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram