MOSPEC FRF1030 thru FRF1060 Switchmode Full Plastic Dual Fast Recovery Power Rectifiers FAST RECOVERY RECTIFIERS -- Designed for use in switching power supplies inverters and as free wheeling diodes. These state-of-the-art devices have the following features: 10 AMPERES 300-600 VOLTS ＊High Surge Capacity ＊Low Power Loss, High efficiency ＊Glass Passivated chip junctions ＊150 OC Operating Junction Temperature ＊Low Stored Charge Majority Carrier Conduction ＊Low Forward Voltage, High Current Capability ＊Plastic Material used Carries Underwriters Laboratory Flammability Classification 94V-O ＊In compliance with EU RoHs 2002/95/EC directives ITO-220AB MAXIMUM RATINGS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Total Device (Rated VR), TC=100℃ Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz) Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Operating and Storage Junction Temperature Range Symbol FRF10 Unit 30 40 50 60 VRRM VRWM VR 300 400 500 600 V VR(RMS) 210 280 350 420 V 5.0 10 A 10 A 80 A -65 to +150 ℃ IF(AV) IFM IFSM TJ , Tstg DIM ELECTRIAL CHARACTERISTICS FRF10 Characteristic Symbol Maximum Instantaneous Forward Voltage ( IF =5.0 Amp TC = 25℃) ( IF =5.0 Amp TC = 125℃) VF 1.30 1.16 V Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) IR 5.0 200 uA Reverse Recovery Time ( IF = 0.5 A, IR =1.0 , Irr =0.25 A ) Trr 250 ns Typical Junction Capacitance (Reverse Voltage of 4 volts & f=1 MHz) CP 70 PF 30 40 50 60 Unit A B C D E F G H I J K L M N O P Q R MILLIMETERS MIN MAX 15.05 15.15 13.35 13.45 10.00 10.10 6.55 6.65 2.65 2.75 1.55 1.65 1.15 1.25 0.55 0.65 2.50 2.60 3.00 3.20 1.10 1.20 0.55 0.65 4.40 4.60 1.15 1.25 3.35 3.45 2.65 2.75 3.15 3.25 3.60 3.80 FRF1030 Thru FRF1060 FIG-3 FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 TYPICAL FORWARD CHARACTERISITICS LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS REVERSE CURRENT (uA.) FIG-2 TYPICAL REVERSE CHARACTERISTICS JUNCTION CAPACITANCE (PF) FORWARD VOLTAGE (Volts) REVERSE VOLTAGE (Volts.) PERCENT OF PEAK REVERSE VOLTAGE (﹪) PEAK FORWARD SURGE CURRENT (Amp.) FIG-5PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 Hz Set time base for 20/50 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram