MOSPEC MBRF10100C Switchmode Full Plastic Dual Schottky Barrier Power Rectifiers SCHOTTKY BARRIER RECTIFIERS Using the Schottky Barrier principle with a Refractory metal capable of high temperature operation metal. The proprietary barrier technology allows for reliable operation up to 175℃ junction temperature. Typical application are in switching Mode Power Supplies such as adaptors, DC/DC converters, freewheeling and polarity protection diodes. 10 AMPERES 100 VOLTS Features ＊Low Forward Voltage. ＊Low Switching noise. ＊High Current Capacity ＊Guarantee Reverse Avalanche. ＊Guard-Ring for Stress Protection. ＊Low Power Loss & High efficiency. ＊175℃ Operating Junction Temperature ＊Low Stored Charge Majority Carrier Conduction. ＊Plastic Material used Carries Underwriters Laboratory ITO-220AB Flammability Classification 94V-O ＊In compliance with EU RoHs 2002/95/EC directives MAXIMUM RATINGS Characteristic Symbol MBRF10100C Unit VRRM VRWM VR 100 V VR(RMS) 70 V IF(AV) 5.0 10 A Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz) IFM 10 A Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) IFSM 125 A TJ , Tstg -65 to +175 ℃ Rθjc 3.8 ℃/w Symbol MBRF10100C Unit VF 0.85 0.78 V IR 0.01 10 mA Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current ( Per diode ) Total Device (Rated VR), TC=125℃ Operating and Storage Junction Temperature Range THERMAL RESISTANCES Typical Thermal Resistance junction to case ELECTRIAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage ( IF =5.0 Amp TC = 25℃) ( IF =5.0 Amp TC = 125℃) Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) DIM A B C D E F G H I J K L M N O P Q R MILLIMETERS MIN MAX 14.90 15.15 13.35 13.55 10.00 10.10 6.55 6.65 2.65 2.75 1.55 1.65 1.15 1.25 0.55 0.65 2.50 2.60 3.00 3.20 1.10 1.20 0.55 0.65 4.40 4.60 1.15 1.25 3.35 3.45 2.65 2.75 3.15 3.25 3.60 3.80 MBRF10100C NSTANTANEOUS FORWARD CURRENT (Amp.) FIG-2 TYPICAL FORWARD CHARACTERISITICS CASE TEMPERATURE (℃) FORWARD VOLTAGE (Volts) FIG-3 TYPICAL REVERSE CHARACTERISTICS FIG-4 TYPICAL JUNCTION CAPACITANCE Tj=125℃ Tj=75℃ Tj=25℃ REVERSE VOLTAGE (Volts) PEAK FORWARD SURGE CURRENT (Amp.) FIG-5 PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 Hz JUNCTION CAPACITANCE (PF) INSTANTANEOUS REVERSE CURRENT (mA.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 FORWARD CURRENT DERATING CURVE REVERSE VOLTAGE (Volts)