SR102

MOSPEC
SR102 Thru SR106
Schottky Barrier Rectifiers
SCHOTTKY BARRIER
RECTIFIERS
Using the Schottky Barrier principle with a Molybdenum barrier metal.
These state-of-the-art geometry features epitaxial construction with oxide
passivation and metal overlay contact. Ideally suited for low voltage, high
frequency rectification, or as free wheeling and polarity protection diodes.
1.0 AMPERES
20-60 VOLTS
*Low Forward Voltage.
*Low Switching noise.
*High Current Capacity
*Guarantee Reverse Avalanche.
*Guard-Ring for Stress Protection.
*Low Power Loss & High efficiency.
*150℃ Operating Junction Temperature
*Low Stored Charge Majority Carrier Conduction.
*Plastic Material used Carries Underwriters Laboratory
Flammability Classification 94V-O
*Moisture Sensitivity Level: MSL-1
DO-41
*In compliance with EU RoHs 2002/95/EC directives
The marking is indicated by part no. with. “M”. ex:SR102M~SR106M
MAXIMUM RATINGS
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectifier Forward Current
Non-Repetitive Peak Surge Current
(Surge applied at rate load conditions
half-wave, single phase,60Hz )
Operating and Storage Junction
Temperature Range
Symbol SR102 SR103 SR104 SR105 SR106
Unit
VRRM
VRWM
VR
20
30
40
50
60
V
VR(RMS)
14
21
28
28
42
V
IO
1.0
A
40
A
-65 to +150
℃
IFSM
TJ , TSTG
DIM
MILLIMETERS
MIN
MAX
A
2.00
2.70
B
25.40
---
C
4.10
5.20
D
0.70
0.90
ELECTRIAL CHARACTERISTICS
Characteristic
Maximum Instantaneous Forward Voltage
(IF =1.0 Amp)
(IF =3.0 Amp)
Maximum Instantaneous Reverse Current
(Rated DC Voltage, TC = 25℃)
(Rated DC Voltage, TC = 125℃)
Maximum Thermal Resistance Junction to
Case
Typical Junction Capacitance
(Reverse Voltage of 4 volts & f=1 MHz)
Symbol SR102 SR103 SR104 SR105 SR106
VF
0.550
0.750
V
0.700
0.850
0.5
10
IR
RθJC
CP
Unit
mA
o
60
90
CASE--Transfer molded
plastic
80
C/W
pF
POLARITY--Cathode indicated
polarity band
SR102 Thru SR106
NSTANTANEOUS FORWARD CURRENT (Amp.)
FIG-2 TYPICAL FORWARD CHARACTERISITICS
SR102-SR104
SR105-SR106
CASE TEMPERATURE (℃)
FORWARD VOLTAGE (Volts)
FIG-3 TYPICAL REVERSE CHARACTERISTICS
FIG-4 TYPICAL JUNCTION CAPACITANCE
Tj=125
o
o
Tj=75 c
o
Tj=25 c
PERCENT OF RATED REVERSE VOLTAGE (﹪)
PEAK FORWARD SURGE
CURRENT (Amp.)
FIG-5 PEAK FORWARD SURGE CURRENT
NUMBER OF CYCLES AT 60 Hz
JUNCTION CAPACITANCE (PF)
INSTANTANEOUS REVERSE CURRENT (mA.)
AVERAGE FORWARD RECTIFIED CURRENT (Amp.)
FIG-1 FORWARD CURRENT DERATING CURVE
SR102-SR104
SR105-SR106
REVERSE VOLTAGE (Volts)