SR307

MOSPEC
SR307 Thru SR3100
Schottky Barrier Rectifiers
SCHOTTKY BARRIER
RECTIFIERS
--- Using the Schottky Barrier principle with a Molybdenum barrier metal.
These state-of-the-art geometry features epitaxial construction with oxide
passivation and metal overlay contact. Ideally suited for low voltage, high
frequency rectification, or as free wheeling and polarity protection diodes.
3.0 AMPERES
70-100 VOLTS
Features
*Low Forward Voltage.
*Low Switching noise.
*High Current Capacity
*Guarantee Reverse Avalanche.
*Guard-Ring for Stress Protection.
*Low Power Loss & High efficiency.
*150℃ Operating Junction Temperature
*Low Stored Charge Majority Carrier Conduction.
*Plastic Material used Carries Underwriters Laboratory
Flammability Classification 94V-O
DO-201AD
*In compliance with EU RoHs 2002/95/EC directives
The marking is indicated by part no. with. “M”. ex:SR307M~SR3100M
MAXIMUM RATINGS
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectifier Forward Current
Non-Repetitive Peak Surge Current
(Surge applied at rate load conditions
half-wave, single phase,60Hz )
Operating and Storage Junction
Temperature Range
SR
Symbol
Unit
307
308
309
3100
VRRM
VRWM
VR
70
80
90
100
V
VR(RMS)
49
56
63
70
V
IO
3
A
75
A
-65 to +150
℃
IFSM
TJ , TSTG
ELECTRIAL CHARACTERISTICS
Characteristic
SR
Symbol
307
Maximum Instantaneous Forward Voltage
(IF =3.0 Amp)
VF
Maximum Instantaneous Reverse Current
(Rated DC Voltage, TC = 25℃)
(Rated DC Voltage, TC = 125℃)
IR
Maximum Thermal Resistance Junction to
Case
RθJC
Typical Junction Capacitance
(Reverse Voltage of 4 volts & f=1 MHz)
CP
308
Unit
309
0.75
3100
0.85
180
mA
o
150
MILLIMETERS
MIN
MAX
A
5.00
5.60
B
25.40
---
C
7.20
9.50
D
1.20
1.30
V
0.01
10
40
DIM
C/W
PF
CASE--Transfer molded
plastic
POLARITY--Cathode indicated
polarity band
SR307 thru SR3100
NSTANTANEOUS FORWARD CURRENT (Amp.)
FIG-2 TYPICAL FORWARD CHARACTERISITICS
SR307,SR308
SR309,SR3100
CASE TEMPERATURE (℃)
FORWARD VOLTAGE (Volts)
FIG-3 TYPICAL REVERSE CHARACTERISTICS
FIG-4 TYPICAL JUNCTION CAPACITANCE
o
Tj=125 c
o
Tj=75 c
o
Tj=25 c
PERCENT OF RATED REVERSE VOLTAGE (﹪)
PEAK FORWARD SURGE
CURRENT (Amp.)
FIG-5 PEAK FORWARD SURGE CURRENT
NUMBER OF CYCLES AT 60 Hz
JUNCTION CAPACITANCE (PF)
INSTANTANEOUS REVERSE CURRENT (mA.)
AVERAGE FORWARD RECTIFIED CURRENT (Amp.)
FIG-1 FORWARD CURRENT DERATING CURVE
SR307,SR308
SR309,SR3100
REVERSE VOLTAGE (Volts)