F20C05 thru F20C20 ® Pb F20C05 thru F20C20 Pb Free Plating Product Switchmode Dual Fast Recovery Power Rectifiers Designed for use in switching power supplies. inverters and as free wheeling diodes. These state-of-the-art devices have the following features: *Glass Passivated chip junctions *Low Reverse Leakage Current *Fast Switching for High Efficiency *150℃ Operating Junction Temperature *Low Stored Charge Majority Carrier Conduction *Low Forward Voltage , High Current Capability *Plastic Material used Carries Underwriters Laboratory TO-220AB Flammability Classification 94V-O MAXIMUM RATINGS AND ELECTRIAL CHARACTERISTICS F20C05C F20C10C F20C15C F20C20C Characteristic Symbol F20C05A F20C10A F20C15A F20C20A Unit F20C05D F20C10D F20C15D F20C20D Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Per Leg TC=125℃ Per Total Device Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz) Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Operating and Storage Junction Temperature Range VRRM VRWM VR 50 100 150 200 V VR(RMS) 35 70 105 140 V IF(AV) 10 20 A IFM 20 A IFSM 175 A TJ , Tstg -65 to +150 ℃ F20C05C F20C10C F20C15C F20C20C Characteristic Symbol F20C05A F20C10A F20C15A F20C20A Unit F20C05D F20C10D F20C15D F20C20D Maximum Instantaneous Forward Voltage ( IF =10 Amp TC = 25℃) VF 1.30 V Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) IR 10 200 uA Reverse Recovery Time ( IF = 0.5 A, IR =1.0 , Irr =0.25 A ) Trr 150 ns Typical Junction Capacitance (Reverse Voltage of 4 volts & f=1 MHz) CP 55 PF DIM A B C D E F G H I J K L M O MILLIMETERS MIN MAX 14.68 15.32 9.78 10.42 5.02 6.52 13.06 14.62 3.57 4.07 2.42 2.66 1.12 1.36 0.72 0.96 4.22 4.98 1.14 1.38 2.20 2.98 0.33 0.55 2.48 2.98 3.70 3.90 Page 1/2 © 2006 Thinki Semiconductor Co.,Ltd. http://www.thinkisemi.com/ F20C05 thru F20C20 ® FIG-3 FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 TYPICAL FORWARD CHARACTERISITICS LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS REVERSE CURRENT (uA.) FIG-2 TYPICAL REVERSE CHARACTERISTICS JUNCTION CAPACITANCE (PF) FORWARD VOLTAGE (Volts) REVERSE VOLTAGE (Volts.) PERCENT OF PEAK REVERSE VOLTAGE (﹪) PEAK FORWARD SURGE CURRENT (Amp.) FIG-5PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 Hz Set time base for 20/50 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram Page 2/2 © 2006 Thinki Semiconductor Co.,Ltd. http://www.thinkisemi.com/