Datasheet EDFA Optical Amplifiers EM316EA and EM316EDFA Highlights Three Optical Amplifier C-Band applications: - Booster - In-line - Pre-amplifier Applications: - Metro DWDM distance extension - Single wavelength distance extension Automatic Gain Control (AGC) Midstage access Managed and non-managed operation Overview Advanced performance monitoring - Input and output power levels - Signal gain - Temperature - Supply voltage Fiber Driver™ optical amplifier modules provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions that are ideal for metro Dense Wavelength Division Multiplexing (DWDM) applications. Gain flattening filters (GFF) assure flat gain (<1 dB variance) over the entire amplified band (Wide-Band models only) The EM316EA family of C-Band EDFA Optical Amplifiers is part of the Fiber Driver optical multi-service platform solution. Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier. Manual and automatic power shutdown Automatic power reduction (APR) for high power modules (output power >21.3dB) A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical gain. Boosters are designed to amplify aggregated optical input power for reach extension. Status LED - Input power OK - Output power OK SC/UPC connector Hot-swap support An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical gain, and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link. Fiber Driver chassis compatibility --1-slot models fit any powered chassis --2-slot models fit BU-2, BU-3V, and BU-16 chassis Long Haul Application Example NC316BU-16/AC NC316BU-16/AC NC316BU-16/AC EM316DMR3G-3R EM316GEMX2R EM316-2XFP-ET DWDM MUX +13 dBm (max) BOOSTER 0 dBm (max) IN-LINE 90 km 80 km INPUT SD SD OPTICAL OUTPUT OK OUTPUT PWR/NMS OPTICAL OUTPUT OK PWR/NMS EM316EA-BR1022 EM316EA-IL2622 1 EM316GEMX2R EM316-2XFP-ET INPUT INPUT SD OUTPUT EM316DMR3G-3R DWDM MUX PRE-AMP OUTPUT OPTICAL OUTPUT OK PWR/NMS EM316EA-LP1013 Datasheet A pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium gain. Preamplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver. EM316EA optical amplifiers use automatic gain control (AGC). The module maintains constant gain for each channel in the aggregated optical signal according to the gain parameter setting as long as the total output power does not exceed the maximum rated value. (See Saturated Output values.) The module is initialized with factory values. When paired with the Fiber Driver EM316LNXNMOT Network Manager (NM), full monitoring and configuration capabilities are supported locally with serial RS-232 and remotely with RJ-45 and SFP Ethernet interfaces. Telnet and secure shell (ssh) provide convenient access for remote command line management. MegaVision Pro®, a network management system from MRV, uses SNMP to provides a graphical user interface (GUI) to control the modules in realistic windows that model the devices. Either management method greatly reduces costly service calls. The NM requires another slot in the chassis with the EDFA module. Some EDFA models include an additional midstage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility, including support for high-speed 10 Gbps protocols. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology. In addition, EM316EA amplifiers with high output power above 21.3 dB include a sophisticated eyesafety protection mechanism. Automatic power reduction (APR) lowers the output power when the output fiber is disconnected or cut. EM316EA advanced performance monitoring functions include real-time reporting of input and output power levels, temperature, and signal gain. As state-of-the-art multi-channel DWDM optical devices, EM316EA family amplifiers are equipped with gain flattening filters (GFF) that assure a flat gain response across the entire C-band and input power range. EM316EA optical amplifiers provide automatic power shutdown when aggregate input falls below the threshold. Power shutdown may also be forced through the module management. The 1-slot amplifier models fit in any Fiber Driver chassis. The 2-slot models fit only in the BU-2, BU3V, and BU-16 chassis. For managed applications, an additional open slot must be available for the EM316LNXNM-OT manager. Contact your MRV Communications representative or visit http://www.mrv.com for additional information on Fiber Driver EDFA modules and applications. Specifications Diagnostic LEDs Power On, Input Optical Power (in range), Output Optical Power (in range) Electrical Requirement Power provided by chassis Operating Temperature 0°C to 50°C (32°F to 122°F) Storage Temperature -40°C to 70°C (-40°F to 158°F) Relative Humidity 85% maximum, non-condensing Physical Dimensions 1-slot: 25 mm x 75 mm x 175 mm (1” x 3” x 7” ); 2-slot: 50 mm x 75 mm x 175 mm (2” x 3” x 7” ) Approximate Weight 1-slot: 370 g (13 oz); 2 -slot: 470 g (17 oz) Total Module Power Usage 3 Watts to 11 Watts Regulatory Compliances Class 1M Laser Product, complies with EN 60825-1 and 21 CFR 1040.10 except for deviations pursuant to Laser Notice No. 50. dated June 24, 2007; FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; Certified by one or more of the following agencies: TÜV, UL, CSA RoHS2 Directive; China RoHS; WEEE Directive; The Quality Management System is certified to ISO 9001 by QMI-SAI Global The Environmental Management System is in compliance with ISO 14001 2 Datasheet Ordering Information: C-BAND (1529 - 1563nm) Description Gain (dB) Max. Output (dBm) Min. Input (dBm) Max. Input (dBm) Typ. NF (dB) Max. NF (dB) Max. Power Consump. (W) EM316EA-BR0918 DWDM C-band EDFA booster, optical amplifier, 2 slots 9 18 -10 9 5.5 6.0 6 EM316EA-BR1522 DWDM C-band EDFA booster optical amplifier, with Automatic Power Reduction (APR), 2 slots 15 22.5 -10 8 5.5 6.0 11 EM316EA-BR2022 DWDM C-band EDFA booster, optical amplifier, with Automatic Power Reduction (APR),2 slots 20 22.5 -15 3 5.5 6.0 11 EM316EA-BR1525 DWDM C-band EDFA booster, optical amplifier, with Automatic Power Reduction (APR),2 slots 15 25 -10 11.5 5.5 6.0 20 EM316EA-PR1013 DWDM C-band EDFA preamp, optical amplifier, 2 slots 10 13 -30 0 6.0 6.5 5 EM316EA-LPR2017 DWDM C-band EDFA in-line/preamp, optical amplifier, 2 slots 20 17 -28 -3 5 5.5 5 EM316EA-IL2622 DWDM C-band EDFA in-line, optical amplifier, with Automatic Power Reduction (APR), 2 slots 26 22.5 -25 -3 5.0 5.5 11 EM316EA-IL2625 DWDM C-band EDFA in-line/preamp, optical amplifier, with Automatic Power Reduction (APR), 2 slots 26 25 -25 -0.5 5.0 5.5 20 Model Booster In-Line/Pre-Amp Ordering Information: 8-CHANNEL NARROW BAND (1529 - 1563nm) Description Gain (dB) Max. Output (dBm) Min. Input (dBm) Max. Input (dBm) Typ. NF (dB) Max. NF (dB) Max. Power Consump. (W) EM316EA-NBR0918 DWDM narrow band or red band EDFA booster, optical amplifier, 2 slots 9 18 -10 9 5.5 6.0 6 EM316EA-NBR2022 DWDM narrow band or red band EDFA booster, optical amplifier, with Automatic Power Reduction (APR), 2 slots 20 22.5 -15 3 5.5 6.0 11 EM316EA-NPR1013 DWDM narrow band or red band EDFA preamp, optical amplifier, 2 slots 10 13 -30 0 6.0 6.5 5 EM316EA-NIL2017 DWDM narrow band or red band EDFA in-line optical amplifier, 2 slots 20 17 -28 -3 5 5.5 5 EM316EA-NIL2622 DWDM narrow band or red band EDFA in-line, optical amplifier, with Automatic Power Reduction (APR), 2 slots 26 22.5 -25 -3 5.0 5.5 11 Model Booster In-Line/Pre-Amp 3 Datasheet Ordering Information: SINGLE-CHANNEL (1529 - 1563nm) Description Gain (dB) Max. Output (dBm) Min. Input (dBm) Max. Input (dBm) Typ. NF (dB) Max. NF (dB) Max. Power Consump. (W) EM316EA-SBR1518 DWDM single-channel EDFA booster, optical amplifier, 2 slots 15 18 -10 3 5.5 6.0 6 EM316EA-SBR2022 DWDM single-channel band EDFA booster, optical amplifier, with Automatic Power Reduction (APR), 2 slots 20 22.5 -15 3 5.5 6.0 11 EM316EA-SBR0913 DWDM single-channel EDFA booster, optical amplifier, single slot 9 13 -10 4 5.5 6.0 3 EM316EA-SIL2013 DWDM single-channel EDFA in-line, optical amplifier, single slot 20 13 -20 -7 5.0 6.0 3 EM316EA-SPR3010 DWDM single-channel EDFA pre-amp, optical amplifier, single slot 30 10 -35 -20 5.0 5.5 3 Model Dual-Slot Booster Single-Slot Ordering Information: C-BAND WITH MID-STAGE ACCESS (1529 - 1563nm) Model Description Gain (dB) Max. Output (dBm) Min. Input (dBm) Max. Input (dBm) Typ. NF (dB) Max. NF (dB) Mid-Stage Access (dB) Fixed Gain and Midstage Access* EM316EA-MBR0918 DWDM C-band EDFA booster, optical amplifier, midstage access, 2 slots 9 18 -10 9 5.5 6.0 3 EM316EA-MBR1522 DWDM C-band EDFA booster, optical amplifier, midstage access, 2 slots 15 22.5 -10 8 5.5 6.0 3 EM316EA-MLP2017 DWDM C-band EDFA in-line/preamp, optical amplifier, midstage access, 2 slots 20 17 -28 -3 5.5 6.0 3 EM316EA-MLP2622 DWDM C-band EDFA in-line/preamp, optical amplifier, midstage access, 2 slots 26 22.5 -28 -3 5.5 6.0 3 *The power consumption for EDFAs with mid stage access is the same as the similar unit without mid stage access Ordering Information: ACCESSORIES Model Description CAK-SM-SCASCU-2 SC/APC fiber optic cable and adaptor kit for booster amplifiers (SC/UPC to SC/APC fiber optic cable with SC/APC adaptor) 2 meters, single mode, simplex CAK-SM-LCASCU-2 LC/APC fiber optic cable and adaptor kit for booster amplifiers (SC/UPC to LC/APC fiber optic cable with LC/APC adaptor) 2 meters, single mode, simplex MRV operates Worldwide sales and service offices across four continents. Contact us at [email protected] MRV Communications Corporate Headquarters 300 Apollo Drive Chelmsford, MA 01824 http://www.mrv.com All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-FD-EDFA-100812 3020111-001 Rev. A8 Copyright ©2012 MRV Communications, Inc. All Rights Reserved.