® Datasheet RD-DMDXA40M Highlights DWDM Fiber Optic Multiplexer and De-Multiplexer 40 Channel 100 GHz DWDM combined Multiplexer and De-multiplexer (MUX & DeMUX) Standalone compact form factor – 1U Plug’n play: requires no configuration Green product: completely passive, needs no power and no cooling Installation friendly: front accessible Dual LC (DLC) connectors for the multiplexed channels and for the aggregated optical link Overview The RD-DMDXA40M from MRV is a combined passive fortychannel 100GHz DWDM multiplexer and de-multiplexer (MUX & DeMUX) in a single 1U solution. It combines standard 100GHZ DWDM ITU grid channels 21 through 60, and it may be used in pairs or in combination with any other vendor’s ITU gridcompliant DWDM MUX/DeMUX. The RD-DMDXA40 is ideal for increasing the fiber capacity between two sites without the need for installing or leasing additional fibers. The complete passive solution requires no power cabling and no configuration; it is a true plug and play solution. Monitor port (DLC) permits non-intrusive monitoring of the aggregated C-Band DWDM link quality of service by using an Optical Spectrum Analyzer Fully transparent at all data rates and protocols from T1 to 40 Gbps Uniform insertion loss variation over the 40-channels - less than 1dB (typical 0.6dB) per MUX or DeMUX Compatible with 100GHz ITU Grid DWDM active transponders and transceivers from MRV and other third parties High reliability, MTBF of 100 years Designed for Telcordia / Bellcore GR-1209 and GR-1221 Applications Point-to-point DWDM fiber optimization Linear add/drop DWDM fiber optimization LUCENT Equipment RD-DMDXA40 FIBER DRIVER Equipment RD-DMDXA40 CISCO Equipment LAMBDA DRIVER Equipment sales@mr v. com 1 ® Datasheet The RD-DMDXA40M enables separation of the active equipment from wavelength multiplexing components. It may be used in conjunction with active optical devices from MRV (see Fiber Driver®, Lambda Driver®, OptiSwitch®, CrossConnect™, Packet Optical Transport product lines) or from any other DWDM-compliant manufacturers. a 19” data rack. Rack mounting options include standard flush front mount or mid-chassis NEBS level 3 configurations. The RD-DMDXA40 front panel features dual LC (DLC) fiber connectors for the 40 DWDM channels as well as a DLC fiber port pair for the multiplexed DWDM trunk link. With front accessible connections and no need for power, the unit may be fully operational in minutes after unpacking the box. The RD-DMDXA40 may be used as a standalone tabletop device or mounted in 1-unit space of Optical Specifications Parameter Specifications Symbol Min. Typ. Unit Comments Max. Number of Channels - 40 - - Channel Spacing - 100 GHz - Channel Frequencies fc 192.10 ~ 196.00 THz 1529.553 ~ 1560.606 nm Wavelength Accuracy ∆λc - ±30 ±50 pm Offset from ITU Frequencies ITU Band PB -12.5 - 12.5 GHz Centered at Each ITU Channel Frequency, fc IL - 3.0 3.75 dB Per MUX or DeMUX IL - 6.0 7.5 dB Per Link ∆IL - 0.6 1.0 dB Over All Channels and PDL ILMT - 20 - dB Trunk to Monitor Port, with 2:98 Tap ILMT - 26 - dB Monitor Port to Channel, with 2:98 Tap R - 0.6 1.5 dB Loss Variation within ITU Band Polarization Dependent Loss PDL - 0.35 0.7 dB Maximum within ITU Band 1 dB Passband δ1dB 0.23 - - nm Measure 1dB down from Min IL, Unpolarized 3 dB Passband δ3dB 0.41 - - nm Measure 3dB down from Min IL, Unpolarized Adjacent Channel Isolation AX - - 26 dB Worst-case within ITU Band Non-Adjacent Channel Isolation NX - - 40 dB Worst-case within ITU Band Total Isolation TX - - 26 dB Cumulative Sum of All AX and NX Return Loss RL 45 55 - dB Over All Channels and PDL Chromatic Dispersion CD -20 - 20 ps/nm Over ITU Band , Guaranteed by Design PMD - 0.3 0.5 ps Over ITU Band, GBD Insertion Loss (Passband) Insertion Loss Uniformity Insertion Loss at Monitor Port Ripple Polarization Mode Dispersion 2 ® Datasheet Operating Specifications -50C to 650C (230F to 1490F) Operating Relative Humidity 85% maximum, non-condensing Storage Temperature -400C to 850C (-400F to 1850F) Storage Relative Humidity 5 to 95% maximum, non-condensing Physical Dimensions 44 mm x 439 mm x 305 mm deep (1.7” x 17.3” x 12” deep) Weight Approximately 2.0 kg (4.4 lb) Regulatory Compliances RoHS 2 Directive; China RoHS; WEEE Directive: Wheelie Bin Mark Ordering Info Operating Temperature Range Model Function Connectors Port/Link Wavelength (nm) RD-DMDXA40M DWDM Passive forty-channel multiplexer and de-multiplexer, monitor port DLC / DLC 1529.55 - 1560.61 (Channel 21-60 ITU Grid) For more information, visit www.mrv.com or contact your MRV sales representative. MRV operates Worldwide sales and service offices across four continents. Contact us at [email protected] MRV Communications Corporate Headquarters 300 Apollo Drive Chelmsford, MA 01824 http://www.mrv.com All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-FD-RDDMDXA40-040213 3020096-001 Rev. A1 Copyright ©2013 MRV Communications, Inc. All Rights Reserved.