OptiSwitch® 606 - MV Communications Co., Ltd.

Datasheet
OptiSwitch® 606 - FE/GE Network Interface Device
Product Highlights
Compact 1RU 9’’ form factor for space saving
MEF CE 2.0 Services Compliant
Non-blocking hardware architecture
- 4 x 10/100/1000Base-T RJ45 ports + 2 x 100/1000FX SFP ports
- All interfaces can be configured as UNI / NNI
- Support for jumbo frames on all ports
OS606
MRV’s OptiSwitch® 606 (OS606) is a highly price-competitive Carrier-Ethernet (CE)
FE/GE Network Interface Device (NID) used to provide cost-effective mass deployment
of 10 Mbps, 100 Mbps, and 1 Gbps MEF-based Ethernet services at customer premises
with guaranteed SLAs.
Architectured for graded enhancement and expansion, the OS606 is a choice
candidate in the “pay-as-you-grow” business model.
Small Office-Home Office (SOHO) customers provided with access to an Ethernetbased cloud of services strongly tend to opt for medium bandwidths with simple
SLAs that may include just protection and minimal service monitoring capabilities. In
order to optimize services to these customers while allowing for their future demands
for more bandwidth and advanced services, the OS606 offers service providers with
two growth paths implemented by software alone: 1) Added mechanisms/features/
capabilities, and 2) Increased service port speeds.
The OS606 meets MEF 9, 14, 17, and 21 specifications, and provides for easy deployment
and management while maintaining full interoperability and guaranteed SLAs.
As a small form factor unit (just 1RU in height and 9-in wide), it can be placed on a
desktop or mounted in a rack or on a wall side-by-side with other OS606s.
The fan-free design of the OS606 reduces CapEx. This reduces the already low power
consumption further, and thereby OpEx while eliminating fan failure and operating
noise.
The OS606 offers a unique combination of a rich set of features and interfaces that
enable easy and flexible field configurations while making it ideal for maintenance
and inventory.
Unmatched flexibility of Ethernet Virtual Circuits
- Selective Q-in-Q and inner/outer VLAN translation
- Simplifies, monitors, and troubleshoots services/
applications
OAM and PM toolset
- End-to-end hardware-based Ethernet service OAM
to track SLAs
- Standards compliance: IEEE802.3ah, IEEE802.1ag,
ITU-T Y.1731, and MEF 17 IA
Pay-as-you grow model
- Capacity License: upgrading 10/100Base-T ports to
10/100/1000Base-T
- Firmware upgrade license - L2+Master-OS® firmware
Rear pluggable external power adapter (power
supply)
MRV Unified Master-OS® firmware for CE service
delivery
- Simplifies operation and management integration
with Operation Support Systems (OSSs)
Protection mechanism
- Mesh, 1:1 (LOS), and n+1 (LAG)
- Ring Protection based on MSTP
Supported by MRV’s state-of-the-art Pro-Vision
NMS and MegaVision EMS
WAN
LAN
NID/UNI
NID/UNI
MEF-powered and SLA-based
business Ethernet services
Metro Ethernet Network
NID/UNI
NNI
End - to - end Service OAM
Enabling SOHO access to Cloud
Services with accurate performance
measurement for OpEx savings
(foreseeing future advanced services)
Cloud Services
OS-606
L
I
A
L
I
A
L
I
A
L
I
A
PWR
CONSOLE EIA-232
MGT ETH
1
2
3
4
L
5
A
L
6
A
- Bandwith on demand
- SLA & Performance Monitoring
Not sure which solution best meets your needs? Visit www.mrv.com or e-mail us at [email protected]
Services Specifications
Configuration
• 4 x 10/100/1000Base-T RJ45 ports + 2 x 100FX/1000FX SFP ports
- Any port can be used for a UNI or NNI service
• Industry Standard CLI
• Out-of-band management: Ethernet port
• Serial interface: RS-232 port
• External pluggable power adapter
MEF compliance
•
•
•
•
•
MEF CE 2.0 Services Compliant
EPL, E-Line, E-Tree & E-LAN – MEF 9
EPL, E-Line, E-Tree & E-LAN Traffic Mgt. – MEF 14
OAM Implementation Agreement (IA) – MEF 17
Abstract Test Suite for UNI Type 2 Part 1 Link OAM - MEF 21
Packet Switching and Simple IP Services
• IEEE802.1Q and IEEE802.1ad provider bridges
- 4K active VLANs / EVCs
- Selective Q-in-Q stacking per ACL criteria
- Tag swapping on egress and ingress traffic
- Inner classification on double tagged frames
• Private VLAN, E-Tree services
• Transparent cross-connect mode
• Layer 2 control protocols tunneling
Traffic Management and QoS
• IEEE 802.1p (VPT), DiffServ (DSCP)
• Marking/remarking profiles between layers
• Eight hardware queues per port with configurable SLs
• Per flow SLA metrics
• Dual-rate 3-color rate limit per flow
Link protection Services
• Link Aggregation (LAG n+1) – static and IEEE 802.3ad LACP
- Load balancing based on L2, L3, and/or L4 headers
Technical Specifications
Standards compliance
Environment
Humidity
Diagnostic LEDs
Rack Mounting
Maintainability
Physical dimensions
WxDxH
• Link level 1:1 Loss of Signal (LOS) protection
• Bi-directional Link Fault Reflection
Management & Diagnostics Tools
• Industry standard CLI and MEF oriented CLI
• IPv4 & IPv6 based TELNET, SSHv2, SNMPv3, RMON
• RADIUS/TACACS+ AAA for management sessions
• Configuration load/save in File Transfer Protocol (FTP), Secure
Copy Protocol(SCP)
• Internal/Remote Syslog
• Scripting tool for macro configurations & maintenance
• Action scheduler for automated rules (time/day/cycle)
• Supported by MRV’s ProVision NMS
OAM
• EFM Link OAM (segment-based CO-to-CPE) per IEEE 802.3ah
- discovery, port-loopback, remote failure indication, dying gasp
• Copper cable diagnostics TDR on RJ45 ports
“Extended” L2 Software includes the following additions:
Protection
• ERPS per ITU-T G.8032v2/Y.1344
• IEEE 802.1d STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
• Protection based on CCM (UNI-to-UNI reflection, 1:1 protection)
Advanced OAM
• End-to-end service OAM per IEEE 802.1ag
- Connectivity Fault Management per service MEP/MIP
- In-service EVC loopbacks & Linktrace
• Remote failure notification/reflection
• Extended frame generator RFC 2544 with L2, L3 traffic generation
• End-to-end Performance Measurement ITU-T Y.1731
- Jitter, Latency & Loss per service
FCC Part 15 (Class A); EMC Directive: Emission (Class A) and Immunity; LVD Directive: Electrical Safety; CE Marking; TUV-R Mark
(Canada, USA); GOST (selected products); RoHS Directive, WEEE Directive.
Operating Temp: 0˚to 50˚C (32˚ to 122˚F)
Storage Temp: - 40˚ to 70˚C (-40˚ to 158˚F)
85% maximum , non-condensing
Global: Power, Management traffic link, Management traffic activity
Per port: Service traffic link, Service traffic activity.
19 “ or 23” racks , compact 1 RU height
Front end user interfaces
Eliminates the need to dismount the system for maintenance or installation of new hardware following initial installation
219.6 x 130 x 42mm (8.64 x 5.12 x 1.65 inch)
Weight (kg. /lbs.)
1.2kg (2.64 lb)
MTBF HRS @25C /77F
1088341 hr
P/N
Order Info
OS606
LIC-606x1G
LIC-606xL2+
OS606/GE/L2+
EM606-PS/AC-EU
EM606-PS/AC-US
EM606-PS/AC-UK
EM606-PS/AC-AU
Accesories
EM606-BR-1
EM606-BR-F
EM606-WBR
OS606 FE/GE NID - 4 x RJ45 10/100BaseT (upgrade option to 1000Base-T) and 2 x 100FX SFP (upgrade option to 1000FX) Ports,
“Basic” L2 Master-OS™ version, external power supply should be ordered separately.
Upgrade license for OS606 - 1GE ports enabler
Upgrade license for OS606 – L2+ MasterOS™ suite
FE/GE NID - 4 x RJ45 10/100/1000BaseT and 2 x 100FX/1000FX SFP Ports, “Extended” L2+ Master-OS™ version, external power
supply should be ordered separately.
External AC Power Supply for the OptiSwitch® 606 (90-240VAC) for EU
External AC Power Supply for the OptiSwitch® 606 (90-240VAC) for US
External AC Power Supply for the OptiSwitch® 606 (90-240VAC) for UK
External AC Power Supply for the OptiSwitch® 606 (90-240VAC) for AU
19” mounting brackets for Telco rack.
19” mounting brackets for side-by-side installation of dual OS606 - Two systems 19” rack.
Wall mounting brackets for OS606 series
* Future release
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the
accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information.
MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders.
MRV-OS-606
Rev.03 03-14
Copyright ©2014 MRV Communications, Inc. All Rights Reserved.