Optical Communications Systems™ Datasheet Optical 8-Port Selector Switch EM316-OSW8 Features Eight selectable optical LC ports Low insertion loss (2.5 dB) C-band and L-band range (1528 nm – 1610 nm) Hardware configurability Fiber Driver management compatibility Hot-swap support One-slot Fiber Driver module Overview The Optical 8-Port Selector Switch (OSW8) maps a common optical port to any of the eight selectable optical ports. With a low insertion loss and steady switching operation, the module allows cost-effective sharing of expensive test and measurement equipment on the common port. More generally, the OSW8 simply selects one of eight data routes through the module. One application of the OSW8 allows the Fiber Driver Optical Spectrum Analyzer (OSA) to monitor up to eight independent data ports for powerful remote network administration. The Fiber Driver network manager (LNXNM-OT) module provides remote access to the OSW8 switch to select the data path from anywhere on the network. The same manager also controls all other Fiber Driver modules within the chassis for additional capital investment value. 8 7 6 1 2 3 4 5 SELECT SELECTABLE PATHS PWR SHARED RESOURCE 9 Optical 8-Port Selector Switch Data Flow 1 Optical Communications Systems™ Datasheet Optical 8-Port Selector Switch Application Example Management Workstation Network Manager (LNXNM-OT) 8 P2 INPUT 7 SP 4 5 SELECT 2 MODE 3 USB 1 PWR PWR PWR/NMS RS-232 NM DD Power Good 6 P1 USB SP DD TX TX RX PS2 Power On 2% monitor #8 2% monitor #7 2% monitor #6 2% monitor #5 2% monitor #4 2% monitor #3 2% monitor #2 2% monitor #1 RX PS1 Power On Power Good LNK/ACT 9 100 SD Optical 8-Port Selector Switch (OSW8) Optical Spectrum Analizer (OSA) Physical Specifications Operating Temperature: -0°C to 50°C (32°F to 122°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) Relative Humidity 85% maximum, non-condensing Physical Dimensions (W x H x D) 25 mm x 75 mm x 175 mm deep (1” x 3” x 7” deep) Approximate Weight 450 grams (16 oz) Regulatory Compliances FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS Directive; China RoHS; REACH Directive; WEEE Directive; The Quality Management System is certified to ISO 9001 by QMI-SAI Global The Environmental Management System is in compliance with ISO 14001 Ordering Information Model Description Protocols Insertion loss Connectors EM316-OSW8 8-to-1 Optical Selector Switch Optical Signals 1528-1610 nm 2.5 dB LC x 9 MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV Los Angeles 20415 Nordhoff Street Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV Boston 300 Apollo Drive Chelmsford, MA 01824 800-338-5316 978-674-6800 MRV International Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax (49) 6105/207-100 All statements, technical information, and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-FD-OSW8-060910 3020075-001 Rev. A2 Copyright ©2010 MRV Communications, Inc. All Rights Reserved.