RFI Shield Clips PICK & PLACE READY BY DESIGN Shield Clips for EMI/RFI Shields Compatible with industry standard placement machines. Packaged in standard (EIA 481) Tape & Reel format. Spring contact design provides secure retention. Ideally suited to miniature electronics. Low profile and right angle clips offer design flexibility. MINI CORNER Material: Packaging: Shield thickness: Insertion Force: Withdrawal Force: Stainless Steel Tape & Reel; 5,000 on a ø300mm reel 0.20 - 0.30mm 19.6N max 0.98N min Material: Packaging: Shield thickness: Insertion Force: Withdrawal Force: Stainless Steel Tape & Reel; 6,000 on a ø300mm reel 0.20 - 0.25mm 19.6N max 0.98N min 1.30 2 x 4.70 5.80 5.80 4.90 4.90 2 x 0.80 2.00 2.00 1.70 1.70 2 x 2.00 1.56 1.56 2 x 4.90 1.00 1.00 1.20 1.20 1.05 1.05 6.00 6.00 0.2 x 45° 2 x 0.80 0.30 0.30 1.40 1.40 ORDER CODE FINISH 2 x 2.002 x 2.00 S0971-46R Recommended PC Board Pattern Tin ORDER CODE FINISH S0981-46R Recommended PC Board Pattern MICRO Tin MICRO EZ–BoardWare Material: Packaging: Shield thickness: Insertion Force: Withdrawal Force: Stainless Steel Tape & Reel; 15,000 on a ø330mm reel 0.20 - 0.25mm 19.6N max 0.98N min 6.50 6.50 5.00 5.00 1.28 1.60 6.70 6.70 2 x 2.40 Material: Packaging: Shield thickness: Insertion Force: Withdrawal Force: 1.28 1.60 0.30 0.30 2 x 1.00 2 x 2.10 2 x 0.75 1.40 0.80 1.00 0.85 1.00 0.80 4.50 4.50 3.50 3.50 Recommended PC Board Pattern 0.30 ORDER CODE FINISH S0991-46R Tin 0.80 0.70 1.30 1.30 2 x 2.40 0.80 1.40 4.70 0.85 Stainless Steel Tape & Reel; 20,000 on a ø330mm reel 0.15 - 0.20mm 19.6N max 0.98N min 2 x 1.50 0.70 4.70 0.30 1.10 2 x 1.50 1.10 Recommended PC Board Pattern 0.90 0.75 0.90 0.75 ORDER CODE FINISH S1001-46R Tin All dimensions in mm. www.harwin.com EZ Hardware Matt.indd 178 178a 18/09/2013 11:58