Shield Can Kit Instruction Sheet

Harwin Clips Cans Samples Flyer Final Feb 15.qxd:Layout 1 23/03/2015 14:48 Page 1
1
PICK & PLACE READY BY DESIGN
Shield Can Kit
Instruction Sheet
S01-806005KIT
Your Kit contains:
Tools required:
• 2 x Shield Can Sheets
• 24 x RFI Shield Clips
• 1 x Instruction Sheet
• A pair of scissors
• A rule
• A solid, flat work surface
IS-39
2
Issue: 2
Date: 23/03/2015
3
Creating the blank:
• Cut along the etch lines to create blank size (Step 2).
• It’s not necessary to cut all the way; fold the surplus section back
and forth until it breaks away.
Use this diagram as a guide when cutting your etched Shield Can Sheets.
4
Creating the flat pattern:
Remove corners of the sheet; one grid square equals 5mm can height.
Cut one edge with scissors, then fold back and forth along the other edge until the square breaks away.
Repeat on the remaining three corners.
•
•
•
5
Note:
Maintaining your hold on the rule whilst bending will ensure that the
edge has a sharper form.
Forming:
• Securely hold the rule along your fold line.
• Apply force to bend the sheet against the work surface.
• Ensure that the side is bent to 90° with etching inside the can.
• Repeat on the opposite side.
6
7
Forming cont.:
On the third side of the can, apply light force with hands to the fold line;
forming a slight bend (above).
Using your work surface, push the side flat against it (90° to top surface).
Repeat on the opposite side.
•
You now have a finished can! Use the can
with S1711-46R RFI Shield Clips provided.
•
•
Harwin recommend S1711-46R clips
are reflow soldered to a PCB.
Harwin Clips Cans Samples Flyer Final Feb 15.qxd:Layout 1 23/03/2015 14:48 Page 2
PICK & PLACE READY BY DESIGN
Pick & Place Ready By Design
Simplifies production processes.
Increased design flexibility and
decreased costs.
Surface mount designs available
in tape & reel for fully automated
assembly.
Free samples available on-line at
www.harwin.com/EZ-Boardware
Stocked in depth throughout our
world-wide distribution network.
To check stock availability
visit www.harwin.com
and enter part no.
S01-806005KIT