SIDE MOUNTING ® Liquid Float Level Switches DESCRIPTION Up to 409 mm (16.12") switch differential Magnetrol side mounting controls mount horizontally to any tank or vessel through a threaded or flanged pipe connection. Standard models are normally equipped with a single switch mechanism for high or low level alarm or control applications. Tandem models with two switch mechanisms are available for two level stage applications, providing the operating functions of two separate instruments such as high and low level alarm. F E AT U R E S T62 with threaded process connection • Carbon or stainless steel body materials (other materials available at request) • Flanged and threaded process connections • Process temperature up to 400 °C (750 °F) • Up to 2 switch levels (T67) • Specific gravity as low as 0,40 • Process pressure up to 82,7 bar (1200 psi) • Field adjustable level differentials from 32 mm (1.25") up to 409 mm (16.12") • Standard anti corrosive protection Optional: - NACE construction (MR-01-75) - Interface calibration - Special actuating levels - Code compliance construction - Special tank connections - Extreme temperature modifications - Class 1, Group B explosion proof electrical enclosure - Special exterior surface preparation and finish T62 with flanged process connection A G E N C Y A P P R O VA L S Agency Approval ATEX II 2G EEx d II C T6, explosion proof II 1G EEx ia II C T6, intrinsically safe CENELEC CCE ➀ EEx d II C T6, explosion proof FM Class I, Div. 1, Groups C & D Class II, Div. 1, Groups E, F & G, Type NEMA 7/9 Non-Hazardous area FM/CSA ➁ A P P L I C AT I O N S • Foaming or surging liquids • Sewage handling • Paints R1 (1) 136/MI/433, explosion proof Explosion proof area – Groups B, C, D, E, F & G Type NEMA 4X/7/9 • Varnishes • Heavy oils • Liquids with solids SAA ➁ LRS Explosion proof area Lloyds Register of Shipment (marine applications) GOST/ GOSGORTECHNADZOR ➁ Russian Authorisation Standards Other approvals are available, consult factory for more details ➀ For CCE approved units, use the ATEX explosion proof model numbers. ➁ Consult factory for proper model numbers. Worldwide level and flow solutions P R I N C I P L E O F O P E R AT I O N A permanent magnet A is attached to a pivoted switch B . As the float C falls following the liquid level, it raises the magnet attractor D into the field of the magnet, which in turn snaps against the non-magnetic barrier tube E , tilting the switch. The barrier tube provides a static seal between the switch mechanism and the float, eliminating the need for a flexing bellows seal, packing gland or other failure prone sealing elements. When the liquid level rises, the float draws the magnet attractor below the magnetic field. The magnet swings out and tilts the switch to the reverse position causing high level switch actuation A . B 4 pivot 5 4 6 5 6 return spring E A A D pivot C rising level falling level MOUNTING High/low level alarm Pump control T62/T64 in external cage T67 T62/T64 2 AVA I L A B L E S W I T C H M E C H A N I S M S Type of switch module ➀ Max. Process Temp. ➁ Switch ratings – A res. ➂ Code 24 V DC 240 V AC 120 V AC ➀ ➁ ➂ ➃ Micro switch max 120 °C (250 °F) 6 15 15 B Micro switch max 230 °C (450 °F) 10 Micro switch - DC current max 120 °C (250 °F) 10 15 15 C – 10 Micro switch with gold alloy contacts max 120 °C (250 °F) D 1 – 1 U Hermetically sealed micro switch max 290 °C (550 °F) 5 5 5 HS ➃ Hermetically sealed micro switch with silver plated contacts max 230 °C (450 °F) 3 1 1 W Hermetically sealed micro switch with gold plated contacts max 230 °C (450 °F) 0,5 0,5 0,5 X Hermetically sealed micro switch max 400 °C (750 °F) 4 – 2,5 F Proximity switch - type SJ 3.5 SN max 100 °C (210 °F) NA NA NA V Mercury switch max 290 °C (550 °F) 10 6,5 13 A Mercury switch max 400 °C (750 °F) 10 6,5 13 3 Pneumatic bleed type (open air) max 200 °C (400 °F) NA NA NA J Pneumatic non bleed type (closed circuit) max 200 °C (400 °F) NA NA NA K For applications with heavy vibration, consult factory for suited switch modules. Max process temperature is specified at 40 °C (100 °F) ambient temperature and for non condensing applications. For more details - see bulletin BE 42-120. For condensing applications, max process temperature is down-rated to 200 °C (400 °F) @ 40 °C (100 °F) ambient. Type B, C, D & U Type HS Type F, W & X Type V Type A & 3 Type J & K AVA I L A B L E H O U S I N G S • • • • • For Non Ex use IP 66 Die cast Aluminium 2 Entries (one plugged) Standard blue anti corrosive coating • Housing heater/drain available, consult factory • • • • • For Exd/Exi use IP 66 Die cast Aluminium 2 Entries (one plugged) Standard blue anti corrosive coating • ATEX II 2G EEx d II C T6 • ATEX II 1G EEx ia II C T6 • • • • For Exd use IP 66 Cast Iron One entry (2 entries at request) • Standard blue anti corrosive coating • CENELEC EEx d II C T6 • • • • For pneumatic switches IP 53 (NEMA 3R) IP 55 optional at request Alu base / cold rolled steel cover • Standard blue anti corrosive coating • • • • • For Exd use IP 66 (NEMA 7/9) Die cast Aluminium 2 Entries (one plugged) Standard blue anti corrosive coating • FM, Class I, Div. 1, Groups C & D • FM, Class II, Div. 1, Groups E, F & G 3 S E L E C T I O N D ATA Adjustable differential Min S.G. ≥ 0,5 Max pressure: 34,5 bar (500 psi) T62 Fixed differential Min S.G. ≥ 0,4 Max pressure: 22,7 bar (1200 psi) T64 Adjustable differential Min S.G. ≥ 0,5 Max pressure: 34,5 bar (500 psi) T67 Single switch models Dual switch models Level differential in mm (inches) Models T62 threaded dim. "D" 77,9 mm (3.07") 3" – Sch 40 Float stem length versus level differential Differential dim. "L" min max 102,3 mm (4.03") 4" – Sch 40 T67 threaded 77,9 mm (3.07") 3" – Sch 40 T67 flanged 73,7 mm (2.90") 3" – Sch 80 457 mm (18") 660 mm (26") Not applicable 32 (1.26) 51 (2.01) 73 (2.87) 102 (4.02) 50 mm (2") 148 (5.83) 206 (8.11) 294 (11.58) 409 (16.10) 100 mm (4") 111 (4.37) 155 (6.10) 221 (8.70) 310 (12.20) 150 mm (6") 38 (1.50) 119 (4.69) 170 (6.69) 236 (9.29) 200 mm (8") - 97 (3.82) 138 (5.43) 192 (7.56) 250 mm (10") - 81 (3.19) 116 (4.57) 162 (6.38) 305 mm (12") - - 100 (3.94) 138 (5.43) 32 (1.26) 41 (1.61) 67 (2.64) 95 (3.74) 50 mm (2") 89 (3.50) 130 (5.12) 191 (7.52) 273 (10.75) 100 mm (4") 83 (3.27) 121 (4.76) 178 (7.01) 254 (10.00) 150 mm (6") - 95 (3.74) 137 (5.39) 197 (7.76) 200 mm (8") - 76 (2.99) 114 (4.49) 159 (6.26) 250 mm (10") - 64 (2.52) 95 (3.74) 137 (5.39) 305 mm (12") - - 83 (3.27) 117 (4.61) fixed max 178 mm (7") 32 (1.26) Not applicable Not applicable Not applicable min max 57 mm (2.25") 25 (1.00) 38 (1.50) 54 (2.12) 76 (3.00) 64 (2.50) 95 (3.75) 140 (5.50) 197 (7.75) max 89 mm (3.50") 25 (1.00) 38 (1.50) 54 (2.12) 76 (3.00) 48 (1.88) 68 (2.69) 99 (3.88) 140 (5.50) 73,7 mm (2.90") 3" – Sch 80 T64 flanged 305 mm (12") Not applicable min T62 flanged 203 mm (8") max max min max All units are factory set at minimum differential unless otherwise specified. Consult factory for differentials not shown. ø D min. nozzle opening ø D min. nozzle opening switch actuates rising level CL of control level diff. switch 1 level level diff. differential switch 2 switch actuates falling level T67 L switch actuates rising level CL of control switch actuates falling level T67 T62 float level diff. switch 1 level level diff. differential switch 2 L T62/T64 float EXPEDITE SHIP PLAN (ESP) Several mechanical switches are available for quick shipment, within max. 3 weeks after factory receipt of purchase order, through the Expedite Ship Plan (ESP). Models covered by ESP service are conveniently grey coded in the selection data charts. To take advantage of ESP, simply match the grey coded model number codes (standard dimensions apply). ESP service may not apply to orders of ten units or more. Contact your local representative for lead times on larger volume orders, as well as other products and options. 4 S E L E C T I O N D ATA A complete measuring system consists of: 1. Order code for side mounted models (each unit can be factory calibrated when specific level differentials are specified separately). 2. Order code for modified models or adders: put an "X" in front of the closest matching order code and specify the modifications/adders separately eg. XT62-AG3A-AAP X = with material certification EN 10204 / DIN 50049-3.1.B 3. OPTION: External cage: consult factory for model description. 1. Order code for T62/T67 side mounted float level switch BASIC MODEL NUMBER1 – Single switch model T 6 2 down to S.G. 0,50 up to 34,5 bar (500 psi) – Dual switch model T 6 7 down to S.G. 0,50 up to 34,5 bar (500 psi) MATERIALS OF CONSTRUCTION Code Cage & process connection material A Float and trim 400 series SST Carbon steel B Magnetic sleeve 316 SST (1.4401) 316 SST (1.4401) 316/316L (1.4401/1.4404) D PROCESS CONNECTION – threaded F 2 3" NPT – ANSI flanges G 3 3" 150 lbs G 4 3" 300 lbs H 3 4" 150 lbs H 4 4" 300 lbs ANSI ANSI ANSI ANSI .– DIN flanges 7 F DN 80, PN 16 DIN 2527 form C 7 G DN 80, PN 25/40 DIN 2527 form C 8 F DN 100, PN 16 DIN 2527 form C 8 G DN 100, PN 25/40 DIN 2527 form C RF RF RF RF FLOAT AND STEM LENGTH Stem length versus min S.G. Float size 203 mm 305 mm 457 mm 660 mm mm (inches) ➀ (8") (12") (18") (26") A 0,80 B 0,80 C 0,90 D 0,90 ø 64 (2.50) E 0,52 F 0,55 G 0,60 H 0,66 ø 64 x 102 (2.50 x 4.00) J 0,55 K 0,55 L 0,60 M 0,60 ø 76 (3.00) N 0,50 P 0,50 Q 0,55 R 0,55 ø 89 (3.50) S 0,65 T 0,65 V 0,70 W 0,70 ø 76 x 127 (3.00 x 5.00) Max pressure bar (psi) @ 40 °C @ 400 °C (100 °F) (750 °F) 24,1 (350) 13,8 (200) 6,9 (100) 4,1 (60) 17,2 (250) 10,3 (150) 27,6 (400) 15,5 (225) 34,5 (500) 20,7 (300) ➀ All floats can be screwed to float stem from inside of vessel in case the float cannot pass through the nozzle. SWITCH MECHANISM & ENCLOSURE - for T62 units (see page 6) - for T67 units (see page 7) - for pneumatic switch mechanisms (see table below) complete order code for T62/T67 side mounted float level switch T 6 Select pneumatic switch mechanism & enclosure - for T62/T64 models Pneumatic switch type Series J (open air) Series K (closed circuit) NEMA 3R (IP 53) Max supply pressure bar (psi) Max liquid temperature °C (°F) Bleed orifice Ø mm (inches) material code A material codes B & D 6,9 (100) 200 (400) 1,60 (0.063) JDE JDE 4,1 (60) 200 (400) 2,39 (0.094) JEE JEE 4,1 (60) 370 (700) 1,40 (0.055) JFE JFE 6,9 (100) 200 (400) – – KOE 2,8 (40) 200 (400) – KOG – 5 1. Order code for T64 side mounted float level switch BASIC MODEL NUMBER1 – Single switch model T 6 4 down to S.G. 0,40 up to 82,7 bar (1200 psi) MATERIALS OF CONSTRUCTION Code Cage & process connection material Carbon steel A Float / trim Magnetic sleeve 304 SST (1.4301) / 316 SST (1.4401) 400 series SST PROCESS CONNECTION – ANSI flanges H 3 4" 150 lbs ANSI RF H 4 4" 300 lbs ANSI RF H 5 4" 600 lbs ANSI RF .– DIN flanges 8 F DN 100, 8 G DN 100, 8 H DN 100, 8 J DN 100, PN PN PN PN 16 DIN 2527 form C 25/40 DIN 2527 form C 64 DIN 2527 form E 100 DIN 2527 form E FLOAT AND STEM LENGTH N Fixed stem length: 203 mm (8") Min. S.G: 0,40 Float size: ø 89 mm (3.50") Float rating: 82,7 bar (1200 psi) @ 40 °C (100 °F) 400 °C (750 °F) @ 51,7 bar (750 psi) SWITCH MECHANISM & ENCLOSURE T 6 4 A - for electric switch mechanisms (see table below) - for pneumatic switch mechanisms (see page 5) complete order code for T64 side mounted float level switch N Select electric switch mechanism & enclosure for T62 and T64 models (see page 3 for switch ratings) All models with material code A qty and switch type A 3 B C D F HS U V W X 6 Weather proof (IP 66) cast Aluminium All models with material codes B and D ATEX (IP 66) CENELEC (IP 66) FM (IP 66) II 2G EEx d IIC T6 II 1G EEx ia II C T6 EEx d IIC T6 cast Aluminium ATEX (IP 66) CENELEC (IP 66) FM (IP 66) NEMA 7/9 Weather proof (IP 66) II 2G EEx d IIC T6 II 1G EEx ia II C T6 EEx d IIC T6 NEMA 7/9 cast Iron cast Alu. cast Aluminium cast Aluminium cast Aluminium cast Iron cast Alu. M20 x 1,5 3/4" NPT M20 x 1,5 3/4" NPT 1" NPT cast Aluminium M20 x 1,5 1" NPT M20 x 1,5 1" NPT M20 x 1,5 1" NPT 1" NPT M20 x 1,5 1" NPT M20 x 1,5 1" NPT M20 x 1,5 1" NPT 1 x SPDT A2P AAP AHC AAC - - AK7 AU7 AKP A2Q AAQ AH9 AA9 - - AK5 AU5 AKQ 1 x DPDT A8P ADP AJC ABC - - AD7 AW7 ANP A8Q ADQ AJ9 AB9 - - AD5 AW5 ANQ 1 x SPDT 32P 3AP 3HC 3AC - - 3K7 3U7 3KP 32Q 3AQ 3H9 3A9 - - 3K5 3U5 3KQ 1 x DPDT 38P 3DP 3JC 3BC - - 3D7 3W7 3NP 38Q 3DQ 3J9 3B9 - - 3D5 3W5 3NQ 1 x SPDT B2P BAP BHC BAC - - BK7 BU7 BKP B2Q BAQ BH9 BA9 - - BK5 BU5 BKQ 1 x DPDT B8P BDP BJC BBC - - BD7 BW7 BNP B8Q BDQ BJ9 BB9 - - BD5 BW5 BNQ 1 x SPDT C2P CAP CHC CAC C2L CAL CK7 CU7 CKP C2Q CAQ CH9 CA9 C2S CAS CK5 CU5 CKQ 1 x DPDT C8P CDP CJC CBC C8L CDL CD7 CW7 CNP C8Q CDQ CJ9 CB9 C8S CDS CD5 CW5 CNQ 1 x SPDT - - - - - - - - - D2Q DAQ DH9 DA9 - - DK5 DU5 DKQ 1 x DPDT - - - - - - - - - D8Q DDQ DJ9 DB9 - - DD5 DW5 DNQ 1 x SPDT F2P FAP FHC FAC - - FK7 FU7 FKP F2Q FAQ FH9 FA9 - - FK5 FU5 FKQ 1 x DPDT F8P FDP FJC FBC - - FD7 FW7 FNP F8Q FDQ FJ9 FB9 - - FD5 FW5 FNQ 1 x SPDT - - - - - - - - - H7A HM2 HFC HA9 - - HB3 HB4 HM3 1 x DPDT - - - - - - - - - H7C HM6 HGC HB9 - - HB7 HB8 HM7 1 x SPDT U2P UAP UHC UAC U2L UAL UK7 UU7 UKP U2Q UAQ UH9 UA9 U2S UAS UK5 UU5 UKQ 1 x DPDT U8P UDP UJC UBC U8L UDL UD7 UW7 UNP U8Q UDQ UJ9 UB9 U8S UDS UD5 UW5 UNQ - - - - - VFS VHS - - - - - - - V5S VBS - - - 1 x SPDT W2P WAP WHC WAC W2L WAL WK7 WU7 WKP W2Q WAQ WH9 WA9 W2S WAS WK5 WU5 WKQ WNQ 1 x DPDT - - - - - - - - - W8Q WDQ WJ9 WB9 W8S WDS WD5 WW5 1 x SPDT X2P XAP XHC XAC X2L XAL XK7 XU7 XKP X2Q XAQ XH9 XA9 X2S XAS XK5 XU5 XKQ 1 x DPDT - - - - - - - - - X8Q XDQ XJ9 XB9 X8S XDS XD5 XW5 XNQ Select electric switch mechanism & enclosure for T67 models (see page 3 for switch ratings) All models with material code A Weather proof (IP 66) qty and switch type A 3 B C D F U W X cast Aluminium All models with material codes B and D ATEX (IP 66) CENELEC (IP 66) FM (IP 66) II 2G EEx d II C T6 II 1G EEx ia II C T6 EEx d II C T6 NEMA 7/9 cast Iron cast Alu. M20 x 1,5 3/4" NPT 1" NPT M20 x 1,5 1" NPT M20 x 1,5 1" NPT M20 x 1,5 1" NPT cast Aluminium cast Aluminium Weather proof (IP 66) cast Aluminium ATEX (IP 66) CENELEC (IP 66) FM (IP 66) II 2G EEx d II C T6 II 1G EEx ia II C T6 EEx d II C T6 NEMA 7/9 cast Iron cast Alu. M20 x 1,5 3/4" NPT 1" NPT cast Aluminium cast Aluminium M20 x 1,5 1" NPT M20 x 1,5 1" NPT M20 x 1,5 1" NPT 2 x SPDT A4A ABA ALC ADC - - AL7 AV7 ALA A4B ABB AL9 AD9 - - AL5 AV5 ALB 2 x DPDT A1A AEA APC AGC - - AO7 AY7 AOA A1B AEB AP9 AG9 - - AO5 AY5 AOB 2 x SPDT 34E 3BA 39E 3DE - - 3L7 3V7 3LE 34B 3BB 3L9 3D9 - - 3L5 3V5 3LB 2 x DPDT 31A 3EA 3PC 3GC - - 3O7 3Y7 3OA 31B 3EB 3P9 3G9 - - 3O5 3Y5 3OB 2 x SPDT B4A BBA BLC BDC - - BL7 BV7 BLA B4B BBB BL9 BD9 - - BL5 BV5 BLB 2 x DPDT B1A BEA BPC BGC - - BO7 BY7 BOA B1B BEB BP9 BG9 - - BO5 BY5 BOB 2 x SPDT C4A CBA CLC CDC C4X CBX CL7 CV7 CLA C4B CBB CL9 CD9 C4T CBT CL5 CV5 CLB 2 x DPDT C1A CEA CPC CGC C1X CEX CO7 CY7 COA C1B CEB CP9 CG9 C1T CET CO5 CY5 COB 2 x SPDT D4B DBB DL9 DD9 - - DL5 DV5 DLB D4B DBB DL9 DD9 - - DL5 DV5 DLB 2 x DPDT D1B DEB DP9 DG9 - - DO5 DY5 DOB D1B DEB DP9 DG9 - - DO5 DY5 DOB 2 x SPDT FFA FBA FLC FDC - - FL7 FV7 FLA FFB FBB FL9 FD9 - - FL5 FV5 FLB 2 x DPDT FHA FEA FPC FGC - - FO7 FY7 FOA FHB FEB FP9 FG9 - - FO5 FY5 FOB 2 x SPDT U4A UBA ULC UDC U4X UBX UL7 UV7 ULA U4B UBB UL9 UD9 U4T UBT UL5 UV5 ULB 2 x DPDT U1A UEA UPC UGC U1X UEX UO7 UY7 UOA U1B UEB UP9 UG9 U1T UET UO5 UY5 UOB 2 x SPDT W4A WBA WLC WDC W4X WBX WL7 WV7 WLA W4B WBB WL9 WD9 W4T WBT WL5 WV5 WLB 2 x DPDT W1B WEB WP9 WG9 W1T WET WO5 WY5 WOB W1B WEB WP9 WG9 W1T WET WO5 WY5 WOB 2 x SPDT X4A XBA XLC XDC X4X XBX XL7 XV7 XLA X4B XBB XL9 XD9 X4T XBT XL5 XV5 XLB 2 x DPDT X1B XEB XP9 XG9 X1T XET XO5 XY5 XOB X1B XEB XP9 XG9 X1T XET XO5 XY5 XOB P H Y S I C A L S P E C I F I C AT I O N S Description Measured variable Physical range Process temperature T62/T67 models Process pressure (for higher ratings T64 models consult factory) Cage and process connection material Float Trim Wetted materials Magnetic sleeve Specification Liquid level / interface level Standard models: min S.G. 0,40 Up to 34,5 bar (500 psi) @ 40 °C (100 °F) Up to 400 °C (750 °F) @ 20,7 bar (300 psi) Up to 82,7 bar (1200 psi) @ 40 °C (100 °F) Up to 400 °C (750 °F) @ 51,7 bar (750 psi) Carbon steel or stainless steel (others at request) 316 SST (1.4401) – T62/T67; 304 SST (1.4301) – T64 316 SST (1.4401) 316 SST (1.4401), or 400 series SST E L E C T R I C A L S P E C I F I C AT I O N S Description Specification Switch ratings Up to 15 A @ 240 V AC (depending on switch mechanism) Up to 10 A @ 120 V DC (depending on switch mechanism) Single or dual SPDT or DPDT contacts (single contacts or single pneumatic for T62/T64 models, dual contacts for T67 models) Dry contact with standard or gold alloy contacts, Mercury, Hermetically sealed, Hermetically sealed with gold or silver plated contacts, Proximity switch, or single pneumatic bleed and non bleed ATEX II 2G EEx d II C T6, explosion proof ATEX II 1G EEx ia II C T6, intrinsically safe CENELEC EEx d II C T6, explosion proof FM/CSA/SAA, explosion proof LRS, Lloyds Register of Shipment (marine applications) GOST/GOSGORTECHNADZOR, Russian Authorisation standards Other approvals are available, consult factory. M20 x 1,5 ISO, 1" NPT and 3/4" NPT (or others at request) Signal Output Switch Types (see table on page 3) Approvals (see table on page 1) Cable entries ELECTRICAL CONNECTION Hazardous area Safe area Hazardous area Safe area I.S. Power Relay Power 7 DIMENSIONS in mm (inches) X X Y Y V Z V Z W W 78* (3.07) X 78* (3.07) Y 124 (4.88) 114 (4.50) 219 (8.62) Z this dimension equals float, + stem length, minus 66 (2.60) model T62/T67 threaded V this dimension equals float, + stem length, minus 76 (3.00) 229 (9.00) W model T62/T67 flanged 90* (3.54) min level differential 32 (1.25) 137 (5.39) 267 (10.50) 267 (10.50) * Dimensions for all housings, except for cast iron housing, add for these 76 mm (3") Housing type Models WeatherproofFM (NEMA 7/9) ATEX (Cast Alu) CENELEC (Cast Iron) model T64 flanged V W mm inches T62/T64 with HS-switch and T67 257 10.12 T62/T64 excl. HS-switch 202 7.94 All 249 T62/T64 165 Pneumatics Switch Module J Pneumatics Switch Module K øX Y Z mm inches mm inches mm inches 42 1.66 151 5.93 109 4.29 M20 x 1,5 (*) or 1" NPT (2 entries - 1 plugged) (*) not for FM (NEMA 7/9) 9.80 45 1.77 143 5.63 110 4.33 M20 x 1,5 or 3/4" NPT (single entry - 2 entries at request) 110 4.33 6.50 39 1.54 118 4.65 130 5.12 1/4" NPT Allow 200 mm (7.87") overhead clearance / All housings are 360 ° rotatable QUALITY ASSURANCE - ISO 9001 THE QUALITY ASSURANCE SYSTEM IN PLACE AT MAGNETROL GUARANTEES THE HIGHEST LEVEL OF QUALITY DURING THE DESIGN, THE CONSTRUCTION AND THE SERVICE OF CONTROLS. OUR QUALITY ASSURANCE SYSTEM IS APPROVED AND CERTIFIED TO ISO 9001 AND OUR TOTAL COMPANY IS COMMITTED TO PROVIDING FULL CUSTOMER SATISFACTION BOTH IN QUALITY PRODUCTS AND QUALITY SERVICE. PRODUCT WARRANTY ALL MAGNETROL MECHANICAL LEVEL CONTROLS ARE WARRANTED FREE OF DEFECTS IN MATERIALS AND WORKMANSHIP FOR FIVE FULL YEARS FROM THE DATE OF ORIGINAL FACTORY SHIPMENT. IF RETURNED WITHIN THE WARRANTY PERIOD; AND, UPON FACTORY INSPECTION OF THE CONTROL, THE CAUSE OF THE CLAIM IS DETERMINED TO BE COVERED UNDER THE WARRANTY; THEN, MAGNETROL INTERNATIONAL WILL REPAIR OR REPLACE THE CONTROL AT NO COST TO THE PURCHASER (OR OWNER) OTHER THAN TRANSPORTATION. MAGNETROL SHALL NOT BE LIABLE FOR MISAPPLICATION, LABOR CLAIMS, DIRECT OR CONSEQUENTIAL DAMAGE OR EXPENSE ARISING FROM THE INSTALLATION OR USE OF THE EQUIPMENT. THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED, EXCEPT, SPECIAL WRITTEN WARRANTIES COVERING SOME MAGNETROL PRODUCTS. BULLETIN N°: EFFECTIVE: SUPERSEDES: UNDER RESERVE OF MODIFICATIONS Heikensstraat 6, 9240 Zele, België Tel. +32 (0)52.45.11.11 • Fax. +32 (0)52.45.09.93 • E-Mail: [email protected] DEUTSCHLAND Schloßstraße 76, D-51429 Bergisch Gladbach-Bensberg Tel. 02204 / 9536-0 • Fax. 02204 / 9536-53 • E-Mail: [email protected] FRANCE Le Vinci 6 - Parc d’activités de Mitry Compans, 1, rue Becquerel, 77290 Mitry Mory Tél. 01.60.93.99.50 • Fax. 01.60.93.99.51 • E-Mail: [email protected] ITALIA Via Arese 12, I-20159 Milano Tel. (02) 607.22.98 (R.A.) • Fax. (02) 668.66.52 • E-Mail: [email protected] UNITED KINGDOM Unit 1 Regent Business Centre, Jubilee Road Burgess Hill West Sussex RH 15 9TL Tel. (01444) 871313 • Fax (01444) 871317 • E-Mail: [email protected] INDIA B4/115 Safdurjung Enclave, New Delhi 110 029 Tel. 91 (11) 6186211 • Fax 91 (11) 6186418 • E-Mail: [email protected] www.magnetrol.com BENELUX OUR NEAREST REPRESENTATIVE BE 44-116.12 MARCH 2002 March 1998