Optoway PT-5300 ************************************************************************************************************************************************************ 5V / 622 Mbps InGaAs PIN-TIA Receiver PT-5300 Series InGaAs PIN-TIA WITH PIGTAIL ************************************************************************************************************************************************************ FEATURES InGaAs/InP PIN Photodiode with AGC transimpedance amplifier Differential ended output Single +5 V operation Speed up to 622 Mbps - 40 ~ +85 ºC operation temperature DESCRIPTION PT-5300 series are designed as optical signal receivers with AGC transimpedance amplifier. Their wide dynamic ranges, differential outputs are suited for telecommunications, especially SONET OC-12 / SDH STM-4, and Fiber Channel. AC / ELECTRICAL AND OPTICAL CHARACTERISTICS (Tc=25°C) Symbol Parameter Test Conditions Dectection Range Min. Typ. Max. Unit 1100 1310 1650 nm 20 24 V/mW G Differential Gain AC coupled, load=50 Ω 16 BW Bandwidth -3 dB point 410 Psat Saturation Power λ=1300nm -3 - dBm - -30 dBm 65 ohm Sens Sensitivity Rout Output Resistance -10 BER=10 @622Mbps - MHz 50 622 Operation Speed Mbps DC / ELECTRICAL CHARACTERISTICS (Tc=25°C) Symbol Parameter Vcc Power Supply Icc Supply Current (no load) Min. Typ. Max. Unit 4.7 5 5.3 V - 40 60 mA ABSOLUTE MAXIMUM RATING (Tc=25 ºC) Symbol Parameter Value Unit 6 V V Voltage Topr Operating Temperature -40~+85 ºC Tstg Storage Temperature -40~+85 ºC ************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 4/9/2009 V2.0 Optoway PT-5300 ************************************************************************************************************************************************************ MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Note: Specifications subject to change without notice. ORDER INFORMATION Part No.: Code Voltage 0 5V 3 3.3 V P T − 5 3 □ □ Code Fiber 0 SMF, 9/125 μm 1 MMF, 50/125 μm 2 MMF, 62.5/125 μm □ − □ □ □ Code PIN Assignment Blank B Type A Type B Code Flange V Vertical H Horizontal X No Flange Code S F T X SA FA TA Connector SC/PC FC/PC ST/PC No Connector SC/APC FC/APC ST/APC ************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 4/9/2009 V2.0 Optoway PT-5300 ************************************************************************************************************************************************************ Revision History Version 1.0 2.0 Subject Initial datasheet Modify the mechanical dimension and PIN assignment Release Date 2002/11/1 2009/4/9 ************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 4/9/2009 V2.0