Optoway PT-3130 ************************************************************************************************************************************************************ 3.3V / 155 Mbps InGaAs PIN-TIA Receiver PT-3130 Series ************************************************************************************************************************************************************ FEATURES ² InGaAs/InP PIN Photodiode with AGC transimpedance amplifier ² Differential ended output ² Single +3.3V operation ² Speed Up to 170 Mbps ² - 40~+85 ºC operation temperature DESCRIPTION PT-3130 series are designed as optical signal receivers with AGC transimpedance amplifier. Their wide dynamic ranges, differential outputs are suited for datacom and telecom applications, especially SONET OC-3/SDH STM-1, Fast Ethernet, and Fiber Channel. AC / ELECTRICAL AND OPTICAL CHARACTERISTICS (TC=25°C) Symbol Parameter Test Conditions Dectection Range Min. Typ. Max. Unit 1100 1310 1650 nm 75 Active Area μm G Gain@10Mbs Differential λ=1300nm 50 - BW Bandwidth Pf =1 μW 120 140 Psat Saturation Power λ=1300nm -3 0 - dBm - -37 -35 dBm - 50 65 ohm Sens Sensitivity Rout Output Resistance -10 BER=10 @155Mbps 70 V/mW MHz 155 Operation Speed Mbps DC / ELECTRICAL CHARACTERISTICS (TC=25°C) Symbol Parameter Min. Typ. Max. Unit VCC Power Supply 3.15 3.3 3.45 V ICC Supply Current (no load) - - 30 mA ABSOLUTE MAXIMUM RATING (TC=25 ºC) Symbol Parameter Value Unit 4.5 V V Voltage Topr Operating Temperature -40~+85 ºC Tstg Storage Temperature -40~+85 ºC ************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 4/1/2002 V2.0 Optoway PT-3130 ************************************************************************************************************************************************************ MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Note: Specifications subject to change without notice. ORDER INFORMATION Part No.: P T Code 0 3 − 3 1 □ Voltage 5V 3.3V 0 □ Code Blank B PIN Assignment Type A Type B ************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 4/1/2002 V2.0